Bridge

Hi support community,The whole point for me of  the offline deployment package is that it's offline but I am not preparing the package correctly I guess.I tried self service package and managed deployment (deselecting all options). During install, it fails and I see this in PDAapp.log: 10/07/20 11:04:30:745 | [INFO] | | ASU | DeploymentManager | | | HTTPConnector | 29208 | GetIEProxyInfo - Failed to get proxy for the url, error:1218010/07/20 11:04:31:058 | [INFO] | | ASU | DeploymentManager | | | HTTPConnector | 41820 | HTTP Request Status code 200. and at the end a few lines later: 10/07/20 11:04:31:890 | [INFO] | | ASU | MSIInvoker | MSIInvoker | | | 26528 | The return Code from Create Process (1603).  I believe that because its looking for a proxy, that that error 1603 is a final cause and is related to that lack of connection. These are offline systems. What can I do to make the installer work?   

Bonjour,Adobe étant une société de merde pensant plus a sa rentabilité qu'a la satisfaction de ses propres clients, je me tourne vers votre expérience.Je possède un iMac de 2012 installé sous version X/15/7 avec BridgeUn bon logiciel que j'aime bien.Le probkème c'est que suite aux mises à jour il plante au démarrage en générant un rapport.Avez vous eu ce problème et comment l'avez vous résolu ?Cordialement, Jean-Luc.

I've just updated CC & Bridge (didn't realise my monthly subscription had stopped) and now every single DNG file won't open.I can preview the DNG files in Bridge but when I try to CMD R to open - nothing happens.And if I drag it into PS i get "Could not complete your request because Photoshop does not recognize this type of file."Any suggestions......I have 7 years of Photo's I now cannot view/edit in PS.

I have recently updated to Photoshop 2020 via CC.  Through Bridge, when I open an image in camera raw I receive a mostly black screen (I will attach image).  My Mac is a Catalins OS.  I have uninstalled Adobe Bridge and reinstalled and it is still the same. Any thoughts on what I need to do next?Thank you for any help!

Need Some Help!!I just updated to the newest version of Bridge and I had renamed 200 photos for a work project using "batch rename" and saved them to the same folder on the SD card. Next, I selected all the files and choose "Move to" a folder on my external hard drive. When I went to the folder directly after none of the photos where there. I know I did not accidentally choose "move to trash" because one it would have asked me if I was sure and two they would be in the trash folder. I have tried searching my entire computer for the file names and can not find anything. Hoping there is a way to retrieve my photos still. Please let me know if anyone has any tips, advice, or solutions.Thank You!

Hi,I guess this is a bug (?)... Using Bridge 10.1.1.166 on MacOS 10.15.6The Bridge window stays displayed when I switch MacOS desktops.I can't have any desktop without the Bridge window displayed on it.And I can't see any option to change this strange behavior. Is there any way to fix this (So that I can assign Bridge to 1 and only 1 desktop)?In fact, I noticed this strange behavior since version... (10.0? 9.n?) Anyway, I have been noticing this for a while... even last year... Many thanks in advance for any help.

Bonjour, J'ai un souci très pénible : le logiciel Bridge crashe au démarrage et se met en mode rapport.J'ai d'ailleurs envoyé celui-ci à Adobe USA je pense.Du fait d décaalage de la langue j'en attends pas grand chose.C'est pourquoi je me tourne verrs vous personnel de Adobe France et utilisateurs.Je précise que j'ai un  iMac en X.15.7 mais que cela le faisait déjà en X.15.6La version Bridge est 10.1.1.166 (10.1.1.166)Pour qu'il ne plante pas au départ auriez vous une solution  ?Cordialement Actonic.

All my CC Apps running flawless except Bridge. I installed the newest version for the first time.If I try to start Bridge the app seems to be started, I see the menu shortly and the running marker in the dock but then its closed or crashed imediatly.I got no crash report - nothing - it's simply quits right after start.I tried earlier version too - the same. Any ideas?

Hi,I'm trying to find a solution in order to manage a photographic archive;Can I buy only Bridge and 1TB of cloud space?Can I connect more than one computer with desktop application using the same account? thanks in advance 😃Enrico

The settings of the adjustment brush in CR are lost when moving to another photo.This is annoying as I want to use the same settings for multiple photos.All settings are reset to default, which costs a lot of extra time. How can I prevent this reset and let CR remember the last settings? 

If you do not want to select and download all the images on a camera memory card using Photo Downloader, is there a way to keep Photo Downloader open once download has completed.It is a pain to have to keep on putting the card back into reader to have downloader open again.ThanksEuan Fraser

Adobe Bridge 2020 will not import the .CR2 files from my Canon 40D. Instead, I get the error message "This device does not contain any supported media".  This despite about 100 cr2 files in the camera.  Any suggestions?

I am trying to mass export my raw files as Jpeg. When i check the mass export progress, it is not running the program and sits with the message 1 job pending.I havent been able to export for 2 days now.thanks

I updated to windows 10 and re-installed Photoshop CS5. Since then when I start Brdige it always start on the desktop. Previously it would start in the last folder I used. Where can I set that it remembers the last folder and starts there

Hello,Birdge, which is one of the main apps I'm using is giving me such a hard time. Since some years, it's being so slow that sometimes I just go to a finder window as it's imposiblle to workd (moving files, create new folder etc.). But, on the past year or more it keeps crashing when selecting a folder in order to see what's in it. No matter what I did, Purge cash, trash prefs, check hidden files etc. or what ever was offered to do - nothing helps. Many of the folders that causes the crash are folders that I was able to view without crash, I did not change anything and suddenly it's causing a crash.  On all the reports I see (which I hardly understand them) I get the same Termination Error: Namespace SIGNAL, Code 0xb. The only thing that helped was to create a new folder and paste the name of the folder that is crashing Bridge and move all files to this folder. Renaming the folder didn't help. I do hope there is a solution for that, I don't knw

Whenever I lunch Adobe Bridge, it freezes and displays the following message if I click any where on the bridge window: "Bridge is not responding". The only way to get it unfreezed is to turn off my internet connection off. then it starts fine. Meaning, internet connections, it starts fine. Internet connection on, it freezes.  Any one elses are experiencing the same issue

Got a new Samsung 4K a few weeks ago. Immediately noticed massive, and I mean biblically massive slowdowns, taking up to 10 seconds to select a thumbnail, for example.Today I decided to try Bridge on my non-4K monitor, and baBANG! There's the bridge I'd come to know and like. Here's the whacky part: I dragged Bridge back to the 4K and things were running fairly well. Bridge eventually slows back down, but seemingly not as slow as when I boot and run it in the 4K.I've not noticed this in other Adobe apps, however.So.v9.0.2.219

Hello good afternoon. I'm using Bridge with W10 and after a while the program freezes. The only way to use it again is to go to windows tasks and close the process. Someone else happens it? It does not throw error, it just freezes.Sorry because my english.Best regards,Walter

I have tried this on 3 different machines, Photo Downloader never shows the RAF files from my Fuji XT-3 camera. It has been like this for a year. With RAF files from my XT-2 camera I don't have that problem. Am I the only one? Is this is Photo Downloader problem of a windows problem? After importing Bridge does show previews but it's hard to make a selection in Downloader like this. Hope someone can help

I've installed Adobe Bridge 2019 on mij iMac and my Windows-PC. On the Windows-PC Bridge works as it should be, but om the iMac Bridge 2019 can't find the network. All my photo's are storage on a network location (NAS) and I can't reach them.

I updated the raw converter in CS6, which went well in photoshop, but in Bridge I still have no update.Means I can still not see the RAW pictures from the new camera in Brdge.What should I do to solve my problem? 

Bridge won't show anything under thumbnails, despite being set to show filename, date and size.  They won't show colors assigned.  Attempts to reset, purge or compact cache haven't helped. I can't even rename a file to correct a spelling mistake, without going to a bulk rename utility. This is making my editing and organizing taking multiple times longer.  Other problems are that movies may show no thumbnail at all, just an icon and not play without going to media player.  It also assigns wrong dates or times.  7/5/2017 seems to be a favorite lately.  I took shots and video of magpies, and shots show times of ~11:30am, while videos show times of ~4:30pm, though all were taken sequentially.  I don't know how it is legal to be forced to pay for such a bug-ridden program that makes work so difficult and make operations  take so many times longer than they should .  And now after an automatic update by Win 10 I keep getting an error message (pic

NO PREVIEWS! This has never been a problem before updating to 2020-version.WHATS HAPPENING??

I've migrated my copy of CS6 from a10.8.5 Mac to a new 10.12.5 MAC. Installation accomplished with Adobe support help. But photo downloader does not detect the camera (or any camera) and I am unable to import. Anyone else have this problem? Any suggestions?

I use two computers: one automatically creates .Bridgesort files and the other does not.  I like to have them as I need to save my sorts: is there a setting that I can change?