Bridge

I have an ongoing issue with Bridge. Almost every time I use it to make a contact sheet, it'll display an image incorrectly. not something like greyscale vs colour etc. but an entirely wrong art file.  I'll drop in two files, one with print art and one with finishing/cut files etc. The preview will show two print files, but usually output the contact sheet as expected. Sometimes though, it'll output the preview and I get two copies of the print file.  The only thing I've found that fixes it in the short term is to quit and reopen, but that's just a temporary fix as the problem comes back after about 10 minutes. So, what's going on and how do I fix it?

Estimado equipo de Adobe:Me gustaría reportar un problema persistente en Adobe Bridge. Desde las últimas versiones (especialmente a partir de Bridge 2023), el comportamiento del zoom con la rueda del ratón resulta errático e incontrolable. Al desplazar la rueda tan solo una vez —tengo un ratón cuya rueda funciona con clicks para avanzar y funciona correctamente en las demás funciones y programas de Adobe—, el programa aplica un zoom que continúa incluso después de haber soltado la reuda del ratón y que no se puede detener mediante clicks o girando la rueda en el sentido contrario. No he encontrado forma aparente de detener el efecto una vez iniciado, más allá de salir de la vista previa o cambiar de archivo.He comprobado que en las preferencias actuales ya no existe la opción para desactivar el zoom con la rueda del ratón, lo cual agrava la situación al no poder evitar este comportamiento no deseado. Tampoco hay respuesta útil al hacer clic en la imagen: el zoom simplemente altern

Just updated to Bridge 15.1.0.635 , Adobe Camera RAW 17.4.1 and Photoshop 26.8.1 When using ACR from Bridge to Photoshop, Photoshop opens, no photos load, Photoshop hangs and becomes unresponsive.Fresh installs have been made by deleting previous settings and all related files and Windows machine also has been factory reset.The problem is still prevalent since the update. I shoot RAW using OM System OM1-Mark II and ORF Raw files. I put RAW files ontop computer SSD Open in Bridge, edit in ACR  and if I do NOT use the super resolution - click open - opens in photoshop fine. No problem here. Repeat the above, but then click super resolution - pop up flashes and states "updating AI settings x of x" which I assume is working 1 of 5, or 3 of 5 photo.Then click open in Photoshop.Photoshop opens with a delay - no photos loaded - Photoshop hangs and becomes unresponsive. So I delete those ORF files and use a fresh set. Open directly in Photoshop, ACR pops

I'm tidying (and adding keywords to) an awful lot of images in my library at the moment. I've been trying to find out how to create a Keyboard Shortcut to appy Metadata edits once I've made them.It's so clunky having to use the mouse to find that little Apply button (tick). If anyone could tell me how to create the shortcut, I'd be very grateful.Thanks,Andy

Hallo liebe Community, ich hatte bisher mit Bridge in all den Jahren noch nie Probleme. Seit ein paar Tagen tritt aber folgender Fehler auf: wenn ich Bridge starte erhalte ich sofort eine kleine Fehlermeldung, die ich nur mit OK bestätigen kann. Nachdem ich das gemacht habe, beendet sich Bridge von alleine – ohne die Option eines Absturzberichtes o.Ä..Danke schonmal für Tipps und Hinweise.

What is this icon in Bridge called and where can I control it. I am using an older version of Bridge because I lost this Icon in the new version and cannot figure out how to get it back 

I’m experiencing a strange issue when using Batch Rename after changing settings in Camera Raw 17.3.1. The RAW image loses its connection to the XMP data file. Look at this screenshot:  If I copy the new file name and paste it again — the problem remains.If I change the sequence number at the end from “03” to “04” — the problem is solved.If I change the sequence number again from “04” back to “03” — it works fine.If I type a completely new file name, everything is OK. I reset the preferences — didn’t help. I don’t understand this issue and can’t figure it out. I tried using only digits, or only text — same results. Any idea why this is happening? Mac Studio M2 Ultra OS Sequoia 15.5Camera Raw 17.3.1Bridge 15.0.4.534 Thank you,Shlomit

All of a sudden when Br is launched at Start-Up(Windows11)..before the entire screen loads, I am taken to the "Sign-In" screen for "My Account". Must login here before I see Bridge entire screen.Never had to do this..always went right to Br. I have the latest version and have a valid Pscc subscription. Is there an option that "logs member into account also available?Thanks!Dan  

Bridge Preferences only allow 6, 7, 8, 9 keyboard shortcuts. Purple has no shortcut, I have to right click on the image > Labels > select purple.This is time consuming, CAN I ALLOCATE A SHORTCUT TO PURPLE?

Bonjour,Si les aides sont seulement anglais, je ne vais par poursuivre...

Hi everyone I'm trying to do a batch rename of 200+ photos. They are currently named "FirstName LastName" and I'd like to flip the order so that I can do some processes with them organized alphabetically by Last Name.  I'd imagine there's a way to do this in Bridge but I'm not sure what the best way to go about it.  Thanks, Lou

I have my columns arranged how I like in my content tabs, but when I open a new tab it reverts to the default columns. I never rate or label anything so I don't need those columns and always delete them, and I like my size all the way to the right. Which means I have to delete and move my columns around every time I open a new tab which isn't realistic for a daily workflow. This happens when I click the hamburger menu for new tab, AND when I press the plus (+) button for a new tab, AND when I right click a folder and select open in new tab. I've tried deleting my workspace and setting up a new one, but that didn't work. I've unistalled and re-installed Bridge but that hasn't worked either. No matter what the columns revert to default. Has anyone found a solution to this? Can I set the default myself? Is this a bug or a feature? I'm running a MAC Studio. 

When I batch rename on my Mac it will not complete the task. I have to cancel it and what is left are files titled  "AdobeBridgeRenameTemp" then a number. As of this writing everything is the latest version.  Mac is Apple chip m3 max Sequoia 15.4.1. This should work. Please help or fix. Thanks Tom

MacOS 15.4.1 - Bridge Version 15.0.4.534 While viewing multiple images and rating  them I will use the down arrow to drop an image out of the view space in order to focus on remaining items. A rejected or dropped image will for some reason get stuck on the screen covering an image that is meant to be reviewed. I've attached an example of this image. 

这个bug在正式版和beta版都存在，且有一两个月了，我实在是不明白，这么明显的bug你们adobe为什么不修？ 出现的时机几乎是随机的，但通常在已经成功执行了一次“右键-移动到”命令之后，下一次“右键-移动到”会实际执行为“右键-复制到” 我的环境是win11，操作是本地磁盘文件移动到移动硬盘。这样的环境和操作是完全合理的吧？

Recently, when I add Description, title, keyword to an image in IPTC Core, I always get this notification about There was an error writing metadata to even after I Purge Cache.

After installing the Camera Raw update from 17.4 to 17.4.1, there is no way to use the plug-in when trying to edit in Bridge. When I click the icon, nothing happens.Do you have any solution for this?

Steps to reproduce:1.  move metadata panel to second monitor2. view photos fullscreen with space on first monitor3. move through the photos with cursor keys Expected Result:Metadata Window reflects the photo displayed fullscreen on the first monitor Actual Result:Metadata Window does not get updated when I change to a different photo Workaround: double hit space to update the metadata panel

I have seen on a couple occasions where I delete an image in a folder, immediately undo it, and the image that comes back is not the one I deleted, it's one that I deleted weeks ago from a completely different folder. Not sure what is happening. Maybe a naming issue? 

Has anyone had success using more advanced pieces of regex to properly rename strings? I want to Capitalize the 3rd back reference in a file name, and although I believe I'm following the proper way of doing so via Replacement Text Case Conversion, Bridge is just giving me a capital U instead. Please see what I am doing below. Additionally, does anyone know what flavor regex Bridge uses? Thanks!

This is a new problem and I'm not quite sure when it started.  Certainly within the last couple of months. I haven't been able to track the exact steps when working in Bridge that cause this.  Also, sometimes I have recovered the files, but I wasn't tracking those steps either.  The worst case was recently where all the files I had open in Bridge were lost, but thankfully, I found them in TRASH so was able to recover them. I use a Mac Studio. I wish I could provide more information.  What I can say is that it has happened several times.  Most of the time, Bridge behaves normally. 

“External exFAT drive not mounting in Bridge 2024 v15.1.0 on macOS Sequoia 15.5, though accessible in all other Adobe apps. No errors, just not listed. Permissions and cache reset attempted.”