Bug Reports

I've only encountered this issue this week, but it is happening everytime I use Audition. When I am in waveform editor, I will zoom in, let's say to the middle of a file, and add a cue marker either by using keyboard shortcut "M" or through the right click menu. The zoom immediately moves over the beginning of the file, so I'm no longer looking at where I just created the marker. Can anyone explain this behaviour? I'm in Audition 23.3.0.55 on a MacBook Pro, 2021 M1 Pro.

Could anyone please tell me what is the preferred length for a miltutrack session? I am trying to edit the sound for a feature film that is  by using the "Edit Sequence in Adobe Audition" feature, and I am running into a number of issues. The first issue is that it takes over a half hour to open the Audition project. The second issue is that every time I try to save, it takes about 7 minutes to save the multitrack session. The third issue I'm running into, which might be unrelated, is that I am using the iZotope RX plugin to clean up dialogue clips, but upon reopening, the clips are completely blank.  After chatting with an Adobe representative, sharing my screen, and allowing them to check out my session, they informed me that 1, I would have better luck splitting my session up into smaller, 10 minute sessions. And 2, they infomed me that third party applications are not very good to work with in Adobe Audition, as they can cause all kinds of mystery.  I am ju

If anyone can help. I just did a a few voiceover recording session. The recording went fine. But when I try to open the file in Audition the file has no waveform and ther eis no audio. This happened to all the 5 recordign sessions t that were from 30 seconds to 2 minutes.First time this is happening its liek the file was recordied over. First time happening have no idea why Audiotion is acting thios way.

I'm working on sound effects for a video game I'm making, using Audition to edit the audio. And every single time, at the very end of the effect, Audition adds a pop/crackle noise at the very end, present both in playback and the exported sound. If I try to trim the crackle off, then a new crackle will be present, again at the very end.It's barely noticable on its own, listening to the sound effect by itself, but in the game, the fact that every single sound effect has this crackle becomes extremely noticable and distracting.I attached a sample sound effect so you can maybe hear what I'm talking about.I'm not a tech expert, somebody please help! What's the deal here!?

I still have that boring issue that Audition 23.3.0.55 doesn't remember the right map location, even after you start a new project by creating a new map for it. When you press save it file map isn't even in the list. This was reported in 2017 already and also a post about said it was solved. Unfortunately not on my location. I communicated with Falk O about it during a few at IBC shows. But it's still there.https://community.adobe.com/t5/audition-discussions/audition-cc-2017-doesn-t-remember-where-to-save-files/m-p/8605095#M3073 Thanks for readingBest, René

When batch processing to MP3 in the latest version, the bitrate type (VBR or CBR) in Export Settings resets every time. The spec I'm working to requires 192kbps CBR but this selection isn't remembered so I have to change it from "VBR high quality" every time which adds an annoying step to my workflow.

Hello. I brought a project in from Premiere Pro and wanted to do some simple high and low shelf automation on tracks to simulate distance to camera. That said, I've come across something that is very peculiar and really can't understand the routing of (I'm primarily a Resolve and Fairlight user), so I'm hoping the community will have some answers. My automation writing for the low shelf goes absolutely fine, and the track automatically goes to Touch mode, great. When I go to put in automation for the high shelf, though, Audition erases all my automation for the low shelf, even though these are separate parameters (and Audition even knows they're separate given I can indiviudalize them in the envelope section). While I know the softwares are different, I'm looking at Fairlight and I can use the same EQ effect to automate these shelves, yet the in house parametric eq in Audition and the Track EQ both erase one shelf's automation when I start working on the other. Does anyone ha

Ich habe eine Multitrack Session erstellt indem ich von Premiere Pro eine Sequenz in Adobe Audition importiert habe. Allerdings wird die Wiedergabe nicht gestartet, wenn ich SPACE oder auf den Play-Button klicke.

hello all. i have a Zoom live track L8 running through a laptop with Audio Pro using Windows 10. in audio hardware  i select AISO for device class. it lists my Zoom L8 AISO Driver as the device, but "(not working)" is indicated after it. i tried un installing and reinstalling the drivers, well as logging out of Audition multiple times. i dont know wether to look to the Zoom L8 or to Audition to try to find the problem. im open to suggestions, thank you

Using Audition 23.3.0.55 on an M1 Mac running Ventura 13.3 When exporting my multitrack mixdown of an entire session, the markers are not included in the resulting file.  I have about a dozen markers in a 38-minute podcastI choose File:Export:Multitrack Mixdown:Entire SessionI ensure the "Include markers and other metadata" is selected I export as either .wav or .mp3, but neither file types include the markers. MacOS QuickView does not show any chapters, Forecast does not show any chapters. I opened a session that successfully exported the markers a few months ago and tried exporting a new file, and the markers were not included. This feels like a bug introduced recently.

v23.3.0.55 - Windows 11 Education, 64-bitAfter Audition recently updated to this version, I'm running to issues of the XMP AES Cart metadata randomly being unable to save to files. Sometmes if I try to save the file again it works- sometimes it doesn't. I've never experienced this with Audition, in years and years of use. We are in a university setting, and our Adobe products are updated as new versions are released.- Greg

I get this error when saving any file.  The fil esaves fine, but this is a new pop-up each time.

I'm not sure whether this is a bug, or just a setting I'm missing somewhere, so thanks for any advice. Here's the issue: often (like more often than not) when I record a file and choose to save it as Mp3, I get an error pop-up that says "An error occurred when saving the file to disk. The destination may be full or no longer available." I can confirm that the destination is available and not full, it happens regardless of the destination, and this error never happens when I save as WAV to the same destination, only when I'm saving as Mp3. And if I click "ok" and try again with the same file name and destination, it saves just fine, sometimes even asks if I want to overwrite the file it just told me it couldn't save. For reference, I'm running Audition CC build 23.0.0.54 (but this has been an issue on any version at least as far back as October, when I started needing Mp3 files more often) on Windows 10 Pro. Not sure what other information would be helpful here, but happy to p

Hi friends I have just install Audition and I am new using the app. How can I remove these little icons that get in the way and appear on each of the panels. I can not see claraly all my tools in every corner and it is very uncomfortable. Below you can see a capure. Thanks you very much.   

While recording vcal audio, I notice the vertical bar that goes across the screen "jump" every now and then. On playback the audio skips ahaed as if it was a bad cut. Could it be the software? or am I missing something? 

After using this tool for over a decade, I've realized that its UI is setup in reverse from what you wouldexpect, and visual representation of the effect is as well. Here are some screen grabs of a recent session cleaning a mono VO track.I have custom settings, and use an envelope to be more agressive outside voice range, protecing the voice. This image shows settings that have been giving me good results (counter-intuative to the UI y Axis negative DB scale). Once processed you can see in the waveform on the left as well as the frequencey analisis, that the baseline noise has been reduced. (Red is the unprocessed, Yellow is processed in the Frequencey Analysis tool )  I was setting up a new system with my custom settings, and started second guessing myself, so I made the envoelpe based on the Y axis oreintation as well as the spectral frequency NR preview... But the results are the opposite of what you would expect : and envelope that protects the non voice ra

Hi Audition lovers,I have used markers since forever, the shortcut key M to create one at wherever the cursor is.  Today I found that I press M, and it places a marker, but my view suddenly changes.  The visible area window has moved to the end of the current file.  The Marker was placed also. before here I am Press M and then suddenly I'm here (right end of the file) and my marker was created back where it was supposed toI checked my shortcuts for M and removed a couple (that were not related to cursor position) about adding CD cue markers (for Shift+M and Ctrl+M)Yet still, if I'm zoomed in at all, and press M, I get my marker, but then I teleport to the edge of the file, and have to maneuver back to where I was. Can you think of why this is happening?Thanks for reading!Audition 23.3.0.55, says I'm up to date. 

I got the latest update to audition in windows and now everytime I add a marker it scrolls back to the start of the audio. Also after using the spacbar to pause and play it stops working. It no longer plays nor pauses the audio track.

Apple M1 MaxVentura 13.3.1 (a) (22E772610a)Adobe Audition 23.3.0.55 My settings are moving during playback (animating?), and I can't get anything in the effects rack to stay put or change to what I want. I've never seen this behavior. What the heck is going on?? See the attached video.

When opening an audio file for editing with Adobe Audition 2023 from within Premier Pro 2023, Audition cannot read the file as it shows it is corrupted. Workaround is to open the audio file directly into Audition and then import the edited file back into Premier Pro. 

I tried opening a session file but it kept crashing. After trying with other sessions, I found out that it was due to a video being in the session. This happened across multiple sessions where I inserted multiple videos. I've tried updating graphics drivers, uninstalled/reinstalled Audition, used Adobe cleaner tool. Nothing seems to stop it from crashing.

I was alerted to this issue by my podcast host Captivate graciously correcting it when uploading MP3s to them, and it seems to have been an issue since early April 2023. The duration of an MP3 saved in the metadata seems to be a few seconds shorter than the actual length of the audio file. This can quickly be seen when opening a file in Audition itself, or any other app. This doesn't cause problems for most apps - they'll simply play back the file anyway - but it confuses podcast hosts and anyone else who might create players based on the metadata. As a result of this, it's causing extra work for these companies. I'm using Audition 23.3.0.55 on MacOS 12.6.5. I've created MP3s from Audition using both the Match Loudness process and directly saving through the File dialogue and seen the same results - duration metadata seen through "Get Info" on MacOS is consistently inaccurate.

Hi there,I can't move clips along the timeline - but I can move a clip from one track to another. But thesame timeline. This happens when I work on my MacBook Pro (some keys were damagedby liquid; I use an external keyboard and blue tooth-linked mouse).When I edit the same video project on PC - I work normally and do not have this problem.BTW: The same happens when I use Adobe Premiere.Any ideas about what's wrong with moving the clips on MacBook? What can I do to make itwork correctly?Many thanks!

If you have a track locked in premier and you use the edit>edit in audition>sequence. And you send that to audition, and then you select all that audio, and you copy and paste it into a new/existing mix the track that was locked in premier won't paste it in the correct spot in time, and it gets all weird when you try to move it,

A new bug has surfaced with the latest update.I'm on version 23.3.0.55, and now when I add a Cue Marker (using the F8 shortcut OR the menu) it moves the display window back to the start of the file. The conditions:This happens only in the Edit windowThis happens only when zoomed in to somewhere other than the beginning of the file It would be nice to get this fixed. Thank you in advance. Phil Lentz