Bug Reports

When recording an Action, we should be able to use Fit Layer(s) on Screen when using Insert Menu Item...

Hi! There are two annoying bugs in latest December release of PS2020. They were present in initial release, but in PS2019 these two options worked just fine. I hope Adobe folks will address these in next release.1. In Select and Mask workspace, the Photoshop does not register/remember "Sample All Layers" for quick selection, refine tools etc. Pretty annoying as I have to click each time I am entering this workspace to quick mask anything in the picture.2. When creating adjustment layer, PS2020 always adds mask layer too, regardless of Layer Panel options>Use default masks on fill layers, which is off in my Photoshop.Thanks, 

I just installed 21.0.2 and I'm having the same issue. To reproduce:1) start a new document.2) create a small ellipse in the center of the document.3) create a group and move the ellipse layer to the group.4) move the layer mask of the ellipse shape to the group (Cmd + Shift, then click drag the layer preview image onto the group)Result:The ellipse is now masking the group which contains a fill layer, however instead of the fill layer going to the edges of the canvas, it stops at the edges of the ellipse.Side note: Why does having the path operator set to Combine Shapes "punch out" the group? I would expect Subtract Front Shape to do that, but I get the opposite expected result. Also I noticed when playing around with the Fill layer left over from the ellipse that it sometimes won't even show up when moved around the layer stack.Switching to Legacy Compositing is still a workaround. But the path operators are still behaving in the opposite manner of what one would expect.Note: Thi

I really like the update for Photoshop 2020 but it has a few small issues.When using the hotkeys to zoom it no longer uses the smooth zoom animation and also doesn't center on the view correctly. This is especially apparent when using canvas rotation as now it often zooms into the grey outside the canvas.Suggestions:-Ability to set zoom increments for mouse wheel zoom-Ability to set the transformation reference point to a finer crosshair / different crosshair design

Hey David, not sure if this is related, but the Constrain Path Dragging option is still toggling off after the Preferences window has been OK'd.Steps to repro:-select the Path Selection Tool-activate Constrain Path Dragging-go Pref/General, click OKresult: Constrain Path becomes de-activated.Note: This conversation was created from a reply on: Photoshop CC 2015: Tool shortcuts resetting to default tool (E.g. L = selects fre....

Photoshop 21.0.2 began crashing near the end of my workday today and I found this video here https://helpx.adobe.com/photoshop/using/preferences.html#restore_preferences and it said you would like to get the zipped copy of my corrupt Photoshop preferences file to take a look at.I've moved Adobe Photoshop 2020 Prefs.psp to my desktop and next time I opened Photoshop it printed fine, so I'll reset my preferences by hand. Attached is my zipped corrupted preferences file. I don't see a way to attach a file here so I've uploaded it here http://mediaservices1.com/george/AdobePhotoshop2020Prefs.zipI'll delete the file later.- Best Wishes,George Conklin

At first, I can't login here with my adobe ID while third-party cookies are blocked on my browser. Really?Main  issue:I have complex bug. I will try explain it.How thebug is looks?Mybrush tool is lagging while I'm drawing some smooth series of strokes.I have video. You cansee drawing lags. Also you can see lags on the history panel.   How thebug appears?To seethis bug you should have next: Thebrush settings panel is on your screen. A lotof 16 bit brushs tips on it. (also displayed on the screen at this moment) At least one Layer (not background) is on your Layer panel. What else?Somevideos to show that the bug appears and disappears:Layer panel influence    Brush panel influence:   A lot of 16 bit brush tips on the screen:   I madeone more video for show you one more manifestation of this issue.See how slow a creation of new layers is.   It's all about Windows 8.1x64Hope it helps. 

Guides are not visible on the right and bottom canvas Guides are not visible when drawn on a layer

Why sync settings in PS CC 2015.1 was removed? I like this idea. Are technical problems with it?

In Adobe CC 2019 there is a generator plugin called crema (I believe is the new engine for save for web) which is causing an unknown Javascript Error and making Adobe Generator Engine Unstable, I have some plugins that use adobe generator engine to work and at some point this Unknown Javascript Error is making the engine crash.I would love some advice on this. [warning:crema 11:31:55.658 index.js:61:21] user settings file could not be created[warning:core 11:31:55.998 generator.js:133:30] Photoshop error { id: 5, body: 'Error: No image open' }[warning:generator-assets 11:31:56.001 documentmanager.js:336:26] Error: No image open[warning:core 11:31:56.531 generator.js:133:30] Photoshop error { id: 11, body: 'Error: No image open' }[warning:crema 11:31:56.532 documentmanager.js:336:26] Error: No image open[warning:core 11:31:56.796 generator.js:133:30] Photoshop error { id: 15, body: 'Unknown JavaScript error' }

Updated to the latest OSX Mojave, and now the first brush stroke after picking a color(Option hotkey pressed and released before painting) on the canvas is not working properly, it does a straight line as if Shift was held down.The problem was there before i updated to 20.0.1 and only had updated to Mojave Tested in Photoshop 18 and Autodesk sketchbook, no problem. Hope there is a fix for it soon.

After updating to CC 20.0.7 (and continuing in 21.0.1) the names of my Image Size presets are now all cutoff within the dropdown selection menu. Many get cut off in ways where important identifying information is not visible, and makes the presets useless.

Opened Photoshop for iPad (v1.0.2)Imported a photo from the camera rollSwitched to Photoshop for Mac (v21.0.1) and opened the cloud documentMade some adjustments and savedReopened the file in Photoshop for iPad Exported the image to my camera rollThe EXIF information for 'Date Time Original' shows the wrong time but proper date (PS set it to 12:00:00am instead of 11:36:17am) -- see attached

Scenario: Create set "Set1", then another set "Set2". Record different actions in both of sets but use the same name for the action "MyAction". When you run Application.batch command via code - Photoshop always run "MyAction" from the first set (Set1) regardles if code requested to pick action from Set2. In Documentation of PhotoShop JavaScript reference for Application.batch() it is written that it expects 4 arguments: batch(inputFiles, action, from [, options]). The "from" argument is set to "Set2" but script always run  "MyAction" from the first available set having the action labeled as requested in action argument ("Set1" int that case). InputFiles and optional options are set properly and they works as expected, the only problem is the inability to control the parent set if batch is ran via code.Is this fixable?Thank you.

Another longstanding one, I think ...Transporting a mask to another layer is already bugged (confirmed), which I've reported earlier.Now let's say I want to copy a mask from the bottom layer, not by dragging it, but by Ctrl-clicking it and adding the mask to the target layer from this selection.When you Ctrl-click the bottom mask (a rectangle that was feathered 200px in Properties panel), and you make a mask with that for the target layer, PS respects the Feathering.If you record this same thing, the Feathering is *not* respected and results in a sharp rectangle.This also happens when using Select > Load Selection...Workaround: Ctrl-click the mask in the Channels palette *will* respect the Feather (or maybe Ctrl+\ if you have that available).Right-clicking the mask and 'Add Mask to Selection' also seems to record fine and respect Feather setting.I like/prefer that there is a way to respect the Feather setting (WYSIWYG) by Ctrl-clicking, but not that it doesn't record as such. No big

After I installed the 19.1 update, I can't go "tab" or use "f" to go to fullscreen mode without losing the right-click menu.  Any brush outline that is using a Full Size Brush Tip will disappear as well, if it is over a certain size.  I have to "tab" back to the mode where my panels are overlaying my image, and then I can see the right-click menu again.  Anyone else have this issue?  Thanks!  Windows 7, btw.

Scratch disk full errors frequently happening when saving documents, trying to open from RAW and during random edits causing the program to shut down. The scratch disks have over 500 gigs available space. This is not a problem when I run PS 2018. Windows 10

In photoshop cc 2019 and older having a smart object layer selected in the layers panel and clicking on the document area with a tool like the Brush Tool would present a dialog saying the smart object needs to be rasterized and offering an Ok button to do so.In photoshop 2020 the same just presents a dialog saying the smart object is not directly editable and gives no explanation as to why or how to proceed.Is that an on purpose change in photoshop 2020?Photoshop CC 2019Photoshop 2020In one case, if a user wants to paint on the Smart Object of a Frame Layer in 2020 there is no easy way to rasterize said layer like was possible in photoshop cc 2019.

https://forums.adobe.com/thread/2548795 When the Maintain Aspect Ratio box is unchecked, Free Transform should be non-proportional. However, in version 20 (Oct 2018 release) the aspect ratio remains locked whether or not the Maintain Aspect Ratio box is clicked. Only using the shift key (new behaviour) seems to work. Reported in Adobe Photoshop forums by Win 10 users.

Photoshop cc 2019:  The Content-Aware/Fill routinely crashes every time I use it (using macOS Mojave); all Adobe Creative Cloud apps are up-to-date as well.

https://forums.adobe.com/thread/2458817I read all topics about this problem and tried all solutions. Some helped but only in specific scenarios they are no options for me. There was not mentioned (at least for me) REAL cause of this error so I am creating new topic. I hope it is more helpful...All proposed default Ps workspaces have tools panels docked to left margin of screen. It is why they let you to open files in normal size. When you dock your Tools panel to right margin of screen all is okey too. Any panel, however docked or not to any other or margin does not make difference. All works still good. Problem occurs only when you undock your Tools panel from left/right margin of screen. If you move it few centimeters from left margin all is still fine, but always when you move it farer to right side of screen (and from up) an created/opened document will minimalize its size due to Tools panel distance from left screen margin. If additionally you dock your Tools panel to any other pa

When I attempt to add a stroke to text under blending I get the spinning color wheel after I apply the color.  Results in a force quit and loss of work.  SOLUTION?

Photoshop CC 2015 appears to have a major bug with lenticular stereo image generation (the same feature works fine in CC 2014 so the bug has only been introduced in the latest version). The bug can be replicated by creating any 3D scene (by loading a 3D model or converting an image to a 3D postcard) and then turning on stereo in the "Current View" panel and choosing Lenticular (and a depth or distance above 0). The lenticular interlacing that is generated in CC 2015 is always 1 pixel wide irrespective of the LPI setting. For example with a 600 DPI image and a 40 LPI setting the vertical interlacing should be 15 pixels wide, but is only 1 pixel wide. Changing the LPI value has no effect on this either. This makes it completely impossible to generate lenticular stereo images for printing in the latest version of Photoshop, which is critical for my business.Please advise if this bug can be looked at and resolved (maybe the code can be reverted to that in CC 2014?).Thanks.

Each time I save on a network drive driven by Mac OS X 10.7.5 (I know, pretty old) connected via afp, Photoshop creates this empty and unneccessary folder. Is there any solution?