Bug Reports

Cuando transcribo mi audio y quiero crear los subtitulos, la barra de carga se completa y estos nunca se crean!

on Beta pro adobe premiere

Hello! the last week, generating peaks is taking too too long! i was trying to edit a simple podcast of 2 cameras and an audio file 1 hour and 3 min long in duration and it took almost 2 hours to generate the peaks! and another 1 hour to apply the Podcast Voice from Essential Sound. This should be a process of 10 minutes maximum! Same thing happened in Premiere pro 25.0 too. It wasted all of my day, and eventually I edited in Premiere Pro 24, which generated the peaks and apply the effect from Essential Sound in no time!  

1. When I click on the audio microphone icon in an audio track (to the right of the M an S buttons) it is not recording the audio. I have checked the audio hardware settings to make sure that they are set to the computer mic. The countdown starts, it says recording but when you stop, there is no audio track. Had to go back to the regular version. 2. When you have the audio enhance setting on a vocal track and have audio under that with ducking, it hides the audiowave form on the vocal track.  MBP M2, running the latest beta as of this morning. 

It is all black in the video but left with sound. I have tried 4 times, but it's still the same. I have exported Apple ProRes 422HQ at the end, which is fine.

25.1.0 Beta (Build 59) Windows11   Things are rendering about as expected in this build, but the "remaining" time is way off.   This project is taking about 5 minutes to do 16 minutes (about normal with downscaling), but it's starting at 15 seconds, then slowly edging up to 45 seconds, then holding +/- 40 seconds the whole time.    Does this in both direct timeline render and AME (25.1.b57)  

For some reason an pro res file is being read as dnxhr and it's messing the alpha channel, tried using cineform codec and still got bad results, only with Animation codec it worked

Whenever playback speed exceeds 1x I get warning messages "Audio hardware I/O overloaded!".This happens regardless of playing forward or backward.This happens regardless of the audio hardware being set to display speakers or my Focusrite Scarlett 8i6.This happens regardles of playing back in the timeline or in the source monitor. System:Mac Studio 2022, Apple M1 Ultra, 128GB RAM, Sonoma 14.6.1Display: Apple Studio DisplayAudio Interface: Focusrite Scarlet 8i6 3rd Gen

Hi, I was working on the Beta version of premiere pro with R3D files, today the automatic update of the Beta makes my files black, impossible to read, render or export. please do somethingthanks

I've encountered an issue in Premiere Pro where the redo function doesn't work after undoing actions. Restarting the application promptly resolves the problem.

Olá, sempre que tento atualizar o Premiere Pro Beta para a última versão, já não consigo mais abrir o software, me aparece esse erro: Startup Crash- Bad INDEX offset array - Só consigo utilizar o Premiere Pro Beta nas versões anteriores! Já tentei de tudo, inclusive tentei esse tutorial da Adobe Help, e não funcionou... Já conversei com o Bot, desconheço um número de telefone daqui do apoio ao Cliente da Adobe em Portugal... Enfim, não sei mais o que fazer, porque na internet e na Adobe Community, não tem nenhum post a falar desse problema no Premiere, somente no Adobe After Effect mas sem solução! Alguém me pode ajudar, por favor!Obrigado!

Dynamic link does not work on beta version Premier Pro 25.1  and After effects 25.1When I open my Premiere Pro beta version 25.1, start a new project, drag a file onto the timeline, and right-click to choose "Replace with After Effects Composition," After Effects opens with a new project. I save it, but the file from Premiere Pro doesn’t appear in After Effects. In other words, the video clip from Premiere Pro is not being transferred to After Effects. Both versions are the same, 25.1, and both are in beta. Everything works fine in the regular version.

adobe premier pro beta version not opening.

I know a lot of changes are happening quite rapidly in the current beta builds and I imagine this is either already on the radar or will be soon enough but figured I'd mention it here just in case; In the current beta build (25.1.0.56) scrubbing the playhead along the timeline seems to occasionally randomly "hitch" or "halt" if you will. I've attached a video showcasing this behaviour and how the current v25.0 stable version does not encounter the same issue. It's one of those small issues that seems like not that big of a deal on the surface but I imagine would get incredibly annoying over a work day. I'm currently unsure if this occurs on a fresh proj file, or a smaller sequence even, unfortunately my video is due this week so I'm in final crunch mode and barely have time to write this up - my sincerest apologies for that, I wish I could test it further to be more helpful.Note: In the video I showcase the issue on a rather zoomed out timeline so it's easier to see (and so my tim

Very weird and frustrating crash. The second I launch Premiere Pro Beta it crashes Chrome (on all 3 windows and all tabs). Then, to make it more fun, it prevents me from opening Chrome again. I have to shut down Premiere before I can use Chrome. Wut? Why would Premiere have anything to do with Chrome?! I suspect it might be something with the graphics card?  I have graphics acceleration disabled for Chrome. Steps to reproduce: Open Premiere Pro Beta v25.1.0.20 Result: Chrome crashes, then prevents Chrome from restarting.  System info (generated by Premiere Beta)    Application: Premiere Pro (Beta) v25.1.0.20    OS: Windows v10.0.22631, RAM: 127.15 GB GB, CPUs (logical): 32System info (generated manually by me)AMD Ryzen 9 7950xWindows 11 Pro Version 23H2OS build: 22631.4169GFX card: Nvidia Geforce RTX 4070GFX driver : 560.70   

Is it me, or is it werid that when i want to copy the audio levels on to another clip, its does add it to the new clip, but does not adjust it. So i see it now got two audio volumes stacked up on eacht other, but i can't delete the first one. Ergo: i cant copy my volume settings on another clip

When I press Ctrl+ "+" (to make a small timeline) my lines between 2 shots is disappear, but when I make a video track a little bit bigger black outlines  is appearingFor me is very easy press Ctrl+ "+" to make a small tmeline, could you please fix it

I need to do scene by scene window dub for a client: Steps to reproduce:1. Place clip on timeline (h.264 MOV UHD-4k)2. Find Video _ Metadata & Timecode Effect3. Place effect on clip Result: Black pictureExpected: Normal picture with timecode burn-in. Making this worse is that when the effect is removed, the clip continues to render black.  Must delete and replace the clip to have active video again. Metadata/Timecode Burn-In works fine on the current release version with the same footage.  The beta has the bug. Source is 4K UHD SDR h.264 MOV System info    Application: Premiere Pro (Beta) v25.1.0.55    OS: Windows v10.0.22631, RAM: 63.83 GB GB, CPUs (logical): 16

Trying to draw with the Pen Tool on the Opacity effect. Starting to draw creates a dashed line instead of a solid mask path. Also, the Mask is not created in the ECP and clicking away on the panel makes the Mask disappear in the Program Monitor. Beta version 25.1.0 (build 56)Also using a version with Smart Masking enabled  

[EDIT] The issue appears to have been fixed in version 25.1.0.056, but I can only confirm that RG Universe and FilmConvert Nitrate are now working - I don't have Dehancer Pro or CineMatch.Cheers. Title says it all. In version 25.1.0.05 when I add a Red Giant Universe or FilmConvert Nitrate effect, the Program Monitor panel blacks out. If I toggle the effect off in the Effect Controls panel or click the Global FX Mute button in the Program Monitor panel, vision is restored. Resetting the preferences, plugin cache and removing the media cache while launching Premiere did not fix the problem. I now have to open my beta projects in the "stable" release and endure the "Some color management features not supported" dialog every time I open them, even after I save them in the older version.

mosaico de 9 vídeo não roda

Copying and pasting footage from Premiere Pro Beta to After Effects doesn't work anymore. I've tried using the command c/command keyboard shortcuts, as well as selecting the copy/paste commands via the pull-down menus in both app... neither works. It used to work in earlier beta builds, but the latest build no longer functions properly. The latest non-beta build still will copy and paste footage. Please fix this. Thank you.

Hello! Recently ive been using the premier pro beta to do some advanced color editing and i belive ive encountered a bug in regard to the Levels effect on the new V25.1 update. On Windows there is a button directly to the right of the effect that allows you to open the histogram and adjust the levels that way, however on mac that option is missing. I use that feature quite heavily on the windows version and im confused how to get this working again, as its crucial to my coloring process for added effects. Would love to know if there is a possible resolution so i can edit using my mac.

Dopo l'ultimo aggiornamento non si vede il video sul monito programma, impossibile montare.Utilizzo windows 11 con l'ultimo aggiornamento

I need to do scene by scene window dub for a client: Steps to reproduce:    1. Place clip on timeline2. Find Video _ Metadata & Timecode Effect3. Place effect on clip Result: Black pictureExpected: Normal picture with timecode burnin. Additionally (and more alarmingly)...4. Remove Metadata & Timecode Effect from clipResult: Clip still shows as black frame. Yellow line in timeline (normally seen with soucre) is gone. First frame thumbnail shows the clip as it should. Source is 4K UHD SDR h.264 MOV System info    Application: Premiere Pro (Beta) v25.1.0.55    OS: Windows v10.0.22631, RAM: 63.83 GB GB, CPUs (logical): 16