Camera Raw

Anyone else experiencing this? I open a batch of consecutive taken files in Camera Raw through Bridge, the file extension on all files is .RAF, and some act like JPEGs when I use the sliders to correct the image, while others behave normally, in that the white balance isn't shown as a temperature, but rather the more rudimentary warmer to colder slider.  These are images taken in a continuous sequence. .  seems to be no ryhyme or reason for Camera Raw to be treating these files differently. . .

I have installed the previous version of Bridge and it is working but it still brings up the new ACR that I don't want because of the crop issue. I do like the new interface and hopefully a new version will be forthcoming. I did download and install the pervious ACR. How to I get it to come up in Brdige?

I take some photos from 3 different camera, all custom white balance, and open by Photoshop + ACR 12.3 or LR, front that ACR white balance (as shot) all different to camera setting.already try uninstall ACR 12.3 and install 10、11 version, same issue. test photos from Fujifilm X-T1、X-T100、DJI Mavic 2 Prothese 4 photos from DJI Mavic, A mode, custom WB 4500k, 5000k, 5500k, 6000k and open with ACR     

Struggling to use the crop tool in the camara raw update. Its not working in the same way. All that seems to happen is the image rotates

I downloaded the horrible new (12.3) version of Raw, hated it with every ounce of my being.  I switched back to the old version.  I culled and made adjustment to an engagement session and saved the files as tifs.  First issue, the thumbnails won't display, and I have checked thumbnail size handling in prefences and emptied cache and neither of those things helped.  So this moring, I decide to delete those tif files and resave.  However, none of the adjustments made in camera raw were saved.  I am livid.  I have no idea why or how to fix these issues.  

This is a problem with the crop function of camera raw.In my case, I don't recognize the width and height of the image and it crops vertically or crops horizontally.In previous versions, cropping was done by recognizing the width and height of the image.In the new version, you can't crop or compare multiple photos in either horizontal or vertical format at once.There is also no way to delete crops once they are set.The older version is much easier to use.Am I setting something wrong?

Everything I always use is now under one tab, so I have to constantly scroll up and down to get to the settings.  And when I try to turn on guide lines for perspective adjustment, the whole thing jumps, so I have to scroll more.  I already miss the one click button to get where I want.   Grrrrrr.

Hi I have just update my photoshop to 21.2 and Bridge to 10.1.0 and I have a problem.  I am on a mac and my normal method of opening files is to go into bridge, see the RAW file that I want, double click it and open it in ACR.  I then make the necessary adjustments, crops etc and then save the RAW file.  In the past the next time I go into bridge and review my RAW files any previous changes and crops are visible and the files look just as I had left them the previous time.   However after this update, whenever I update my RAW files and save them, the changes are not visible in Bridge (ie. I still see the RAW file as it originally was without any changes). The changes only become visible whenever I open up the file in Photoshop and then they are visible.      I have tried reinstalling the software but still get the same result.     Any idea what the problems could be and how do I resolve it ? or can someone advise how

My Bridge updated, I don't like it.  When I open photo in Raw my tool bar is no longer at the top and I can not find the icons I need. Anyone else with this problem? Can I undo the updates if I don't like them?Thank youLoisr

Hello. I use Bridge to edit my RAW files. I usually right click on the thumbnail and select Open in Camera Raw. I can still do that but now the image opens in the newer Camera Raw which I find a bit difficult to navigate compared to the previous version. Is it possible to roll back to the previous version of Camera Raw or am I stuck with the most recent version? Thanks, I hope I explained this clearly enough.

Hi, not sure if this is a correct place to report or if Adobe cares about old Kodak cameras like ProBack or SLR/n/c, still I hope knowledgable people will share their thoughts. Why Enhance feature for DCR files was available in  CRaw v11.4 but gone in v12 ? It helped to reduce moire and other artifacts SLR is infamous for. Is this RAW format so special that required additional efforts the company decided to spend otherwise ? Thanks,Aure

This update now lacks the basic functions of how to straighten and crop a photo as before.  What makes anyone at Adobe think that they needed to fix what was never broken?How do I revert to the previous version? 

Hi,with new update of Camera Raw I have problem that I do local adjustments on one photo and then I clic to another photo and the local adjustment just reset itself to default.I want to keep seting for all of the photos.Now I need to set adjustment every time when I clic on next photo.Is it some way how to change it? 

 How to change the tool view to the previous one in the new camera raw? new is very uncomfortable!the tabbed version was better

The worst update ever. I used camera raw cause I don't like lightroom buttons layout. But camera raw had the best one. Now I need to scroll and choose tools every time. What happened with the crop tool?? Why I need to choose aspect ratio every time? Why I need to switch tools while in the previous version I could do it at the same time (cropping/editing). Now It takes a lot of time and nerves. 

After running an update to install v.9.1.1 of Camera Raw for Photoshop CS6 13.0 through Adobe Application Manager, I get the error that components were not installed and a log file will help me diagnosed the problem. The link to the log file sends me to a non-existing page and the update problem cannot be resolved.

Just like most other people, I'm not exactly overjoyed by the new upgrade to ACR. In the old version of ACR, you could add sharpening to the preview image only, but this seems to have now been removed... I think. Is there any way of doing this in the new ACR?

With the latest version of ACR, I know where the crop tool is supposed to be located but mine is not there.  Also I know there should be a filmstrip similar to Lightroom however it is not there either.  Any suggestions would be greatly appreciated.  Really frustrated at this point.

Even with Bridge 10.1, I can't stomach the inefficient UI. What used to be an efficient tool now requires scrolling to view my complete keyword list. I much prefer Bridge 8.1, but while diagnosing other issues, I inadvertently uninstalled it.Is there a way to reinstall Bridge 8.1? Please?!? "Other versions" only goes back to 9.1.I want 8.1.

The new crop function is counter-intuitive for professionlas like me who've relied on ACR for over a decade for quick photo cropping. The new crop functinality is not helpful for us "old guys" who are the bread and butter Adobe customers. In a future release, please add a "classic crop" option that restores the crop functionality like ACR 12.2. Until then, I'm sticking with ACR 12.2!

In Camera Raw 9.5.1 my Crop Tool will not work properly,  crop ratios are not displayed and the tool is frozen with the Straighten Tool. I need a fix to reset this tool.

In previous versions, I could set a brush for local correction in one image and then when I moved on to the next image in the filmstrip, the settings on the brush would "carry over" and I could make the same local adjustment without resetting the brush. Or I could go to an image I had already corrected, click on a local adjustment icon and pick up those settings to fix the same problem in another image. Now the brush resets all adjustments to zero every time you move from image to image in the filmstrip.  Is it possible to set the brush for carry-over settings in this new version, or has that been done away? I have to edit batches of 20-70  real estate property images at a time. Having to reset the brush every time is not good workflow for me.  Thanks to all!R.

Updated to ACR 12.3 and I am not thrilled with the new interface, but my main issue is that I cannot figure out how to do something that was quite easy to do with the old interface.  There was a button for “Copy current settings to Before” which made it easy to incrementally view the effect of each individual adjustment when desired.    You could make several adjustments, make all of those settings the “Before” and then move one more slider and then see the before/after for the effect of just that one slider.  I may be missing something, but I cannot find a way to easily do this with the new interface. How do I accomplish this in 12.3?

I've tried to convert my raw files (ARW) from my Sony A7III with the Adobe DNG converter, for some reason it doesn't show that I have any files in the folder that I have selected to convert. I also tried to import my files in lightroom with "Copy as DNG" nothing has worked for me. Has anyone experienced this and how may I fix it?

Desde la actualizacion de junio 2020, Camera Raw es un auténtico desastre. A mí  no me sirve para nada. No creo que se haya hecho pensando en los profesionales.