Camera Raw

Hi All I am experiencing multiple errors as I proceed through my workflow from Bridge > RAW > Photoshop. I am posting this in the RAW channel as it starts there. The first is thisThis error happens usually when I attempt to use the Adjustment brush or the Geometry. I have now disabled the feature but it makes RAW sluggish and cropping impossible.The second error is thisThis follows shortly after GPU acceleration automatically disabled so I assume is connected and occurs when I try to do pretty much anything.Around this time I start getting this error in Bridge and Photoshop which must be connected as they both involve the RAMBelow are my system specsMachine Id: {0B81B34E-A118-4D74-B369-CF96A8D8F62B}Operating System: Windows 10 Home 64-bit (10.0, Build 18363) (18362.19h1_release.190318-1202)Language: English (Regional Setting: English)System Manufacturer: Micro-Star International Co., Ltd.System Model: MS-7B45BIOS: A.40 (type: UEFI)Processor: Intel(R) Core(TM) i7-8700K C

the lastest version of CC camera Raw is junk.   too complicated...I cannot find half the tools and it is the worst thing Adobe has done...Why couldn't they have well enough alone....If a chance to revert back to the last camera Raw version is soon supplied, I will cancel my subscription...:( 

Where can I find these settings now in 12.3? Specfically removing chroamtic arbberation and entering the lens profile. 

Hi all.I seem to have an issue with zooming in on a photo in ACR 12.3 update.If I click + to zoom in to 100% it works most of the time. Clicking - zooms back out again to fit image. However, sometimes zooming in goes to say 100.8% or something different. Sometimes I click the + and it will go from say 23.5% to 26%...click again and it goes to 100%.If I zoom in by slideing the mouse to zoom to a specific spot in the photo (more or less than 100%) and then click the - it goes back to fit image, which is fine, but them clicking + goes back to then previous zoom %...not 100%. Do I set "global zoom" to on or off...doesn't seem to make any difference.Hope this makes sense. Just want to be able to zoom in and out to 100% all the time using the + and - command. Thanks. (windows 10 PC)

Updated to 12.3 and latest version of Photoshop CS. Am I crazy (possibly), I don't see the option to choose a database instead of separate XMP Sidecar files. Is this feature gone? Using a MacBook Pro running Catalina. Thanks.

How should I save it. It doesn't seem to me to get this on all my images by default.

When I attempt to move any slider, the numeraical value changes but the slider doesn't move for about 3 seconds.  My drivers are up todate, so that doesn't seem to be the problem

Wie kann man beim letzten Camera raw update die Menuoberfläche wieder auf die alte Darstellung zurückstellen? Es gab nach dem Update die Wahl zwischen 2 Oberflächendarstellungen und ich habe die Neue gewählt. Leider. Das Freistellen von Bildern ist oberumständlich und es werden zuviele Funktionen dargestellt (sind darstellbar durch Aufklappen). Diese Funktionen finde ich besser im "großen Photoshop". 

This latest update is terrible!! Might as well use Lightroom. Raw is no longer quick & easy to use it is clunky, slow & downright silly now!! 

I wish I could travel back in time to stop myself from clicking on the Upgrade Camera Raw button.You're making totally unnecessary changes by moving things around at the cost of all the users' time.

Where is the pull down menu for HDR merge and panorama merge in Camera Raw Utility in the new update? It used to be located inside the fly out menu above the film strip.  

I have just switched over to 12.3 and one of the first things I have noticed is that the ability to mask how sharpening is applied appears to be gone. In the previous versions of ACR you could adjust the details mask to remove pretty much all of the picture apart from the highest contrast edges from being affected by the sharpening, with the advantage that sharpening could then be heavily boosted in just those areas with zero impact on the rest of the image. It created more pop with a more natural image. That facility is gone. In fact there is literally just a sharpness slider with no options to adjust threshold or radius let alone the mask. Any ideas? Are these controls no longer required? Is sharpening on 12.3 massively more advanced than before?

In the previous versions of Camera Raw it was possible to change the color-rating of a picture with ctrl+6, ctrl+7, ctrl+8, ctrl+9. With the current version this doesn't work anymore. How do I change the color rating with the current version?

I bought a Nikon D750 a week or two ago and found out that Camera Raw didn't support this model.  The very next morning there was an update available and now CR actually recognises my camera but still won't recognise RAW files, only .jpg.  Is this the case for everyone or just me, as I did experience an error message when I installed the update?

Hej!Jag hittar inte min kamera i kamerakalibrering i Lightroom Classic.Min kamera är en Fuji X-T2.Har sett att man kan komma åt kamerans bildstilar till exempel.Hur ser jag för att få tillgång till det i Lightroom?MVH Roy

Creative Cloud updated Camera Raw to version 10.3 this morning and now Bridge wants to regenerate all 237,000 thumbnails and previews in the cache. Which represent 14 terabytes of tiffs and will take days to complete. How do we make it stop? Is there a way go back to the previous version of Camera Raw?

I used it constantly - super convenient, compared to the crop tool - but with this latest ACR "upgrade," (12.3-0.493) I can't find it.Am I missing it?  Is it now buried?  Or is it complete gone?Very, very disappointed with this new version. 

Good day,I've finally installed the update after choosing to forgo the process for some time.As I am opening images in ACR, i'm seeing new field called profiles.. and I am seeing sharpening now reads 40 instead of 30.I am assuming this has to do with an update, but Is there an actual change to the values?Is acr changing profiles when image is opened?Is the new value of 40 the equivalent of what used to be 30?Is there a way to hide the profiles selection?thank you

Vertrouwend op Adobe even snel de laatste update Camera Raw gedownload. Wat een complete bak ellende! Alle vertrouwdwe symbolen van bovenkant naar rechts vertikaal verplaatst.Constant van boven naar beneden scrollen. Het oude uitsnij/krop systeem werkte prima, keuze maken en dan verslepen binnen de diverse opties, snel handelen en foto's produceren.Wie betaald mijn extra uren in nabewerking met deze verprutste programatuur.Adobe schaam je om zo met je abonnement betalers om te gaan, ga voortaan eerst testen in de praktijk en niet als wiskids achter een bureau.Ga zsm terug naar de oude programmastructuue of ik ga uitkijken naar een betere leverancier en zeg mijn abonnement op samen met 20 andere collega's. 

A week or so ago, after losing use of CR following that crass update, I followed Adobe's advice to get Camera Raw working again by changing the psp ending on Photoshop to .old. Why I had to do that was a complete mystery, but it worked for a few days, but now when I try to open an ORF file it just comes up a mass of diagonal lines. I'm a photogtrapher, not a computer geek. Why am I having to put up with this?Anyone know what the real fix is?

How to remove DNG Converter 9.5.1.595 ?No entry found in “ Systemsteuerung\Programme\Programme und Features“No uninstall script exists within the installation directory “ C:\Program Files (x86)\Adobe“Not any instruction on the InternetAnd also the update to DNG Converter 12.0.0.322 does not replace the older Version.Any help is welcomeUwe

I Can not find the sharpening mask, or the radius etc in The sharpening area.  There are only 3 options.  I attached a screen shot.

Adobe, you just perfectly screwed up, and ruined my entire workflow, in one go.Is there a way of getting compensation for the time wasted on getting through this mess? It will cost me days to find a rhythm in this new set-up, it will stress my hand scrolling up and down, which was one of the reasons why I didn't go for the Lightroom.Why not make the lot floating, this way everyone can set it as we prefer it, make visible what we want to see, and have it where it works best for us, like in Photoshop, InDesign, etc.? Working on two screens would be a blast if we could have all the tools folded out and accessible all at once. Why did you swap the positions of buttons like done & open? Why removing the green color from it? Who is guiding you and where are you going with it? BTW, if I was looking radical changes I would have gone for PhaseOne, On1 Raw, Luminar, or Aurora. Sticking with you was because of years of practice and adjusting to a workflow that became a solid habit,

Camera Raw: XMP Presets werden bei DNG nicht angezeigtHallo liebe Mitglieder,kann mir jemand Sagen, warum meine Raw Presets (XMP) nicht mehr angezeigt werden, wenn ich ein DNG öffne? Bei anderen Raw Formaten wie ARW oder CR2 ist alles in Ordnung.Es handelt sich hierbei um die aktuelle Version von Camera Raw und Photoshop auf der aktuellen Mac Version. Ich bin echt Dankbar für jeden Tipp!Wünsche euch allen einen schönen Sonntag

Camera Raw 13.2 is a real disaster. You have destroyed a wonderful program!