Camera Raw

Where/how do I access the masking slider that was just below the sharpening sliders.I used it it All the time to mask out potentially noisy ares  

I installed Camera Raw 12.3. And now all my personal Profiles are gone. I tried do install my *.xmp Files but no Profiles was showed. I only see the standard Profiles. All atempts to import my personal Profiles failed. Error Mesasge: "Profiles and specifications cannot be imported. All elements have already been imported." How can I access my specifications (*.xmp Files)? Please help.  

Dans la nouvelle version version de Camera Raw, où est passée la fonction "Auto" des réglages de base (exposition, contraste, etc.) ?

After installing the "update" I can't figure out how to get the photos on the left side like they used to be rather than the bottom. How do I do this?  Thanks

I use Adobe Lightroom CC and Adobe Photoshop CC as part of my image processing workflow. I have a Fuji X-T2 and have read a number of articles that intimate that Lightroom Struggles to process Fuji RAW files effectively.I have processed a number of my files in a selection of RAW converters and have found that although the detail in the converted file seems to be in line with other applications there does appear to be some obvious color tone loss in the Lightroom conversions. I have included an example export below to illustrate the issue. It would be good to understand the roadmap for Adobe in respect to X-Trans RAW file processing. I do not want to switch software but I feel that I am not getting the best results from my RAW files currently.The image below shows a comparison of default processing from Lightroom on the left and MacPhun Luminar on the right. Note the Luminar conversion shows a greater color tone range in the foliage.

The little eyes on right of each panel header do not function consistently. Sometimes, they toggle on and off the effects set in a panel. Other times, they switch off the effects in a panel permanently. The latter is pretty consistent behavior in the geometry panel, and after that happens, most of the other eyes misbehave. Please investigate and fix.

Recently changed camera from Panasonic Lumix TZ80 to TZ90, which also produces JPEG and RAW images. Have long used Adobe DNG Converter (version 9.4.0.548) to convert TZ80 RW2 images to .dng for editing etc in Photoshop Elements 12 (in Windows 7). That converter will not convert the TZ90 RW2 images (apparently same format as TZ80 RW2 images). Have tried downloading current Adobe DNG Converter version (12.2.1?) but it will not install and open for testing on RW2 files. Please advise.

I understand tweeking and developing new ideas for a product, but this latest update to Camera Raw is horrendous. I can't even begin to find the functions I use most frequently. What's worse, the older versions don't even appear to be available. You have made what would have been a 20-minute project undoable! I need to be able to directly control how much of the image will be affected by a change in noise reduction. I also want the old cuve function back.

Hi,before the update to ACR 12.3 the adjustment brush would keep its settings as long as the user did not change them. Now I have to load one of my presets every time I switch over to a new picture. The old behavior was perfecet since one would sometimes work on similar pictures and therefore use the same brush settings over the span of several picture. Now it is as cumbersome and illogical as the use of the brush in LR. Who can think of this as a good idea?Cropping in ACR 12.3 is practically unusable for me (i7, 16Gb, internal graphics). It used to be fine, ACR used to be fine and fast. Not anymore.The UI changes are not great but something one will (have to) get used to. But changes in fundamental functionality are simply stupid. 

Hi!I recently bought a new camera; Canon 5D mark IV and now i cant open my raw files i bridge cs6 even though i updated everything it says.. and i need to fix this as soon as possible. please help me!

how do you change the defolt interface? after the update it was requested but now I can't find a way to change the interface

They forgot default button on each panel : for example, when I make changes in the color mixer and after continuing to work the image I see the colors should go back to default  I have to select colors one by one and set to zero again. Also the crop tool is horrible: if you make a selection for crop but want to remove (instead of resizing it) and select again you must go to the menu and 'reset crop' and then search again in a list for the aspect because it really resets the crop; yesterday I just had to click outside the image to reset crop but not the settings for new crop aspect.I believe they forgot to include the loupe also - I have to press a key in the keyboard to open the loupe but sometimes , until yesterday, I prefered to click on the loupe button. But I am still searching for the loupe. The new layout is weird and I really don't understand why these confusing changes.

Just updated to new ACR, when you crop in ACR is there a way to make the new image default to fit page? 

The cropping is reverse for me, cant select and crop. Also, when done editing photo and selecting "ok" it looks different within the program. SO PISSED!

Need some help with the latest upgrade (what an oxymoron).  Where's the mask in sharpening?  Thanks.

I update camera RAW to12.3 and  UI was change can I change it back to older version

Does anyone know where I can find the luminance slider in this new version of Camera Raw? I found the color mixer one but I cant find the regular one so I can use to smooth skin on a black and white photo. Any help would be appreciated! 

Please add Adobe RAW extention/add on to PS APP for IPAD PRO users the Raw options are not the same as desktop RAW features 

Hi, I've just updated ACR to the latest version 12.3 and I'm now experiencing a colour problem when opening previously adjusted files and then switching between the various profiles using the 'Browse Profiles' tab. When a previously adjusted image is opened the previously selected profile and colour is displayed correctly, but when I click on any other profile option and change the profile the colour is completely off, all options displaying very obvious green casts. This is only happening when changing the profile on some images, most behave normally. I've never experienced anything like it. Any help would be much appreciated. TIA  

Pourquoi vouloir à tout prix changer les présentations. Vous avez déjà fait ça avec Bridge, c'est un programme qui était très bien, il est devenue d'une platitude totale, on a l'impression d'être dans les années 70. Et maintenant c'est au tour de camera Raw, passez-moi l'expression, mais vous êtes vraiment "chiant". Les onglets étaient quand même beaucoup plus pratique, maintenant il faut manipuler l'ascenseur c'est une grosse perte de temps. Cela ne présente absolument aucun intérêt.Why want to change the presentations at all costs. You already did that with Bridge, it's a program that was very good, it became completely flat, it feels like it was in the 70s. And now it's camera Raw , give me the expression, but you are really "boring". The tabs were still much more practical, now you have to manipulate the elevator is a big waste of time. This is of absolutely no interest.Clément Ledermann 

Just editing some photos in the new acr and noticed that any photo shot at 1/3200th sec is shown as 1/320 in the file info section top right corner. Other shutter speeds reported correctly. Bug?

I updated PS, CR and LR last night and now Olympus ORF files come up a mass of lines in Camera Raw. I solved this last time, but can't remember how. Need to get on urgently, so why does this happen?

We are happy to announce the release of Camera Raw & DNG converter 12.3.   What's in the 12.3 release? New features and enhancements New camera and lens support Bug fixes to some of the top customer reported issues.   To update Camera Raw to 12.3, click "Update" in the Creative Cloud desktop app next to Camera Raw.  More detailed instructions for updating

In the old version of Camera Raw, it had a apply previous converstion to an image, but it looks like ithat feature has been removed - or moved elsewhere. Anyone know where this function is now?

The latest camera raw major update seems to have taken the database of corrections away? Now I get the .XMP files everywhere!