Camera Raw

In Camera Raw 9.5.1 my Crop Tool will not work properly,  crop ratios are not displayed and the tool is frozen with the Straighten Tool. I need a fix to reset this tool.

In previous versions, I could set a brush for local correction in one image and then when I moved on to the next image in the filmstrip, the settings on the brush would "carry over" and I could make the same local adjustment without resetting the brush. Or I could go to an image I had already corrected, click on a local adjustment icon and pick up those settings to fix the same problem in another image. Now the brush resets all adjustments to zero every time you move from image to image in the filmstrip.  Is it possible to set the brush for carry-over settings in this new version, or has that been done away? I have to edit batches of 20-70  real estate property images at a time. Having to reset the brush every time is not good workflow for me.  Thanks to all!R.

Updated to ACR 12.3 and I am not thrilled with the new interface, but my main issue is that I cannot figure out how to do something that was quite easy to do with the old interface.  There was a button for “Copy current settings to Before” which made it easy to incrementally view the effect of each individual adjustment when desired.    You could make several adjustments, make all of those settings the “Before” and then move one more slider and then see the before/after for the effect of just that one slider.  I may be missing something, but I cannot find a way to easily do this with the new interface. How do I accomplish this in 12.3?

I've tried to convert my raw files (ARW) from my Sony A7III with the Adobe DNG converter, for some reason it doesn't show that I have any files in the folder that I have selected to convert. I also tried to import my files in lightroom with "Copy as DNG" nothing has worked for me. Has anyone experienced this and how may I fix it?

Desde la actualizacion de junio 2020, Camera Raw es un auténtico desastre. A mí  no me sirve para nada. No creo que se haya hecho pensando en los profesionales.  

Hi All I am experiencing multiple errors as I proceed through my workflow from Bridge > RAW > Photoshop. I am posting this in the RAW channel as it starts there. The first is thisThis error happens usually when I attempt to use the Adjustment brush or the Geometry. I have now disabled the feature but it makes RAW sluggish and cropping impossible.The second error is thisThis follows shortly after GPU acceleration automatically disabled so I assume is connected and occurs when I try to do pretty much anything.Around this time I start getting this error in Bridge and Photoshop which must be connected as they both involve the RAMBelow are my system specsMachine Id: {0B81B34E-A118-4D74-B369-CF96A8D8F62B}Operating System: Windows 10 Home 64-bit (10.0, Build 18363) (18362.19h1_release.190318-1202)Language: English (Regional Setting: English)System Manufacturer: Micro-Star International Co., Ltd.System Model: MS-7B45BIOS: A.40 (type: UEFI)Processor: Intel(R) Core(TM) i7-8700K C

the lastest version of CC camera Raw is junk.   too complicated...I cannot find half the tools and it is the worst thing Adobe has done...Why couldn't they have well enough alone....If a chance to revert back to the last camera Raw version is soon supplied, I will cancel my subscription...:( 

Where can I find these settings now in 12.3? Specfically removing chroamtic arbberation and entering the lens profile. 

Hi all.I seem to have an issue with zooming in on a photo in ACR 12.3 update.If I click + to zoom in to 100% it works most of the time. Clicking - zooms back out again to fit image. However, sometimes zooming in goes to say 100.8% or something different. Sometimes I click the + and it will go from say 23.5% to 26%...click again and it goes to 100%.If I zoom in by slideing the mouse to zoom to a specific spot in the photo (more or less than 100%) and then click the - it goes back to fit image, which is fine, but them clicking + goes back to then previous zoom %...not 100%. Do I set "global zoom" to on or off...doesn't seem to make any difference.Hope this makes sense. Just want to be able to zoom in and out to 100% all the time using the + and - command. Thanks. (windows 10 PC)

Updated to 12.3 and latest version of Photoshop CS. Am I crazy (possibly), I don't see the option to choose a database instead of separate XMP Sidecar files. Is this feature gone? Using a MacBook Pro running Catalina. Thanks.

How should I save it. It doesn't seem to me to get this on all my images by default.

When I attempt to move any slider, the numeraical value changes but the slider doesn't move for about 3 seconds.  My drivers are up todate, so that doesn't seem to be the problem

Wie kann man beim letzten Camera raw update die Menuoberfläche wieder auf die alte Darstellung zurückstellen? Es gab nach dem Update die Wahl zwischen 2 Oberflächendarstellungen und ich habe die Neue gewählt. Leider. Das Freistellen von Bildern ist oberumständlich und es werden zuviele Funktionen dargestellt (sind darstellbar durch Aufklappen). Diese Funktionen finde ich besser im "großen Photoshop". 

This latest update is terrible!! Might as well use Lightroom. Raw is no longer quick & easy to use it is clunky, slow & downright silly now!! 

I wish I could travel back in time to stop myself from clicking on the Upgrade Camera Raw button.You're making totally unnecessary changes by moving things around at the cost of all the users' time.

Where is the pull down menu for HDR merge and panorama merge in Camera Raw Utility in the new update? It used to be located inside the fly out menu above the film strip.  

I have just switched over to 12.3 and one of the first things I have noticed is that the ability to mask how sharpening is applied appears to be gone. In the previous versions of ACR you could adjust the details mask to remove pretty much all of the picture apart from the highest contrast edges from being affected by the sharpening, with the advantage that sharpening could then be heavily boosted in just those areas with zero impact on the rest of the image. It created more pop with a more natural image. That facility is gone. In fact there is literally just a sharpness slider with no options to adjust threshold or radius let alone the mask. Any ideas? Are these controls no longer required? Is sharpening on 12.3 massively more advanced than before?

In the previous versions of Camera Raw it was possible to change the color-rating of a picture with ctrl+6, ctrl+7, ctrl+8, ctrl+9. With the current version this doesn't work anymore. How do I change the color rating with the current version?

I bought a Nikon D750 a week or two ago and found out that Camera Raw didn't support this model.  The very next morning there was an update available and now CR actually recognises my camera but still won't recognise RAW files, only .jpg.  Is this the case for everyone or just me, as I did experience an error message when I installed the update?

Hej!Jag hittar inte min kamera i kamerakalibrering i Lightroom Classic.Min kamera är en Fuji X-T2.Har sett att man kan komma åt kamerans bildstilar till exempel.Hur ser jag för att få tillgång till det i Lightroom?MVH Roy

Creative Cloud updated Camera Raw to version 10.3 this morning and now Bridge wants to regenerate all 237,000 thumbnails and previews in the cache. Which represent 14 terabytes of tiffs and will take days to complete. How do we make it stop? Is there a way go back to the previous version of Camera Raw?

I used it constantly - super convenient, compared to the crop tool - but with this latest ACR "upgrade," (12.3-0.493) I can't find it.Am I missing it?  Is it now buried?  Or is it complete gone?Very, very disappointed with this new version. 

Good day,I've finally installed the update after choosing to forgo the process for some time.As I am opening images in ACR, i'm seeing new field called profiles.. and I am seeing sharpening now reads 40 instead of 30.I am assuming this has to do with an update, but Is there an actual change to the values?Is acr changing profiles when image is opened?Is the new value of 40 the equivalent of what used to be 30?Is there a way to hide the profiles selection?thank you

Vertrouwend op Adobe even snel de laatste update Camera Raw gedownload. Wat een complete bak ellende! Alle vertrouwdwe symbolen van bovenkant naar rechts vertikaal verplaatst.Constant van boven naar beneden scrollen. Het oude uitsnij/krop systeem werkte prima, keuze maken en dan verslepen binnen de diverse opties, snel handelen en foto's produceren.Wie betaald mijn extra uren in nabewerking met deze verprutste programatuur.Adobe schaam je om zo met je abonnement betalers om te gaan, ga voortaan eerst testen in de praktijk en niet als wiskids achter een bureau.Ga zsm terug naar de oude programmastructuue of ik ga uitkijken naar een betere leverancier en zeg mijn abonnement op samen met 20 andere collega's. 

A week or so ago, after losing use of CR following that crass update, I followed Adobe's advice to get Camera Raw working again by changing the psp ending on Photoshop to .old. Why I had to do that was a complete mystery, but it worked for a few days, but now when I try to open an ORF file it just comes up a mass of diagonal lines. I'm a photogtrapher, not a computer geek. Why am I having to put up with this?Anyone know what the real fix is?