Camera Raw

My system is Windows 10 Pro 64 Bit (Version 1809 OS Build 17763.292) running Photoshop CC 2019 (Version: 20.0.2 20181219.r.30 2018/12/19: 1202136  x64)ACR is version 11.1.0.112.I am certain that everything is completely up to date.I have installed new monitors running with native resolution 2560 x 1440 (Recommended) and with Windows scaling set to 125% (Recommended)All Adobe software works well apart from one issue with ACR with which I am aware.This is that Adjustment Brush pins and Graduated Filter pins are much larger than they should be or used to be and worse, they cannot be easily selected. Fiddling around with the mouse pointer in the general vicinity of the pin may locate the selection spot but this is rather hit and miss. Clicking on one directly adds a new pin rather than selecting it.I have found that the problem can be fixed in two ways, neither of which is satisfactory:1. Set Windows scaling to 100% (Then text in other applications is too small to read.) 2. In Camera

I updated Camera Raw on Feb 13, 2020.  My process is this: Open Raw image in Photoshop, Camera Raw intercepts the raw image and I make edits, then I save image to my Microsoft OneDrive cloud folder.  From there I download the image to my phone to post to Instagram.  After the new CR update, when I try to open my edited image from my phone, my CR edits are not saved to the image ... and I can't even open the Image. In some cases, the edited photos are saved with a random cropping -- and sometimes without any edits performed on the image. Really strange.   FYI, I've updated all the apps mentioned in my process, still nothing.  The only work around for now is the screen capture the edited image for a social post. But this isn't fixing the problem.  

For many years now, I make Camera Raw edits to raw photographs from Bridge. These edits are reflected when previewed in Bridge, but not anymore. All I see is the original raw file without any of the Camera Raw edits. I read one suggestion to click the, "Save Image" button in the bottom left, which converts the original raw file into something else (Ex: original raw .orf file into a raw .dng file). This is a huge pain when you have over 1000 photos to process. Plus, if I want to make another Camera Raw change to the new DNG file, I have to Save it again as another DNG file. This was not a good solution, so I hope someone can help. Thanks #cameraraw, #bridge, #adobebridge, #photoediting, #photography

The (RAF-)file size of Fuji's Finepix S3 Pro and S5 Pro are wrong since Version 12.2. Now it is 2880 x 3840 px (3: 4). The original format is 2 : 3 with 2848 x 4256 px.Is there somebody who can tell me how I can get the former RAW-converter-version?Thanks a lot for helpMark

If I hover the mouse cursor over an icon on the toolbar in ACR the tooltip is displayed but is dim, then, after a long pause it gets brighter, then, after another long pause, it gets a bit brighter and so on. This is beyond annoying because it is so slow. How can I disable this and any other animations in ACR? Thanks.

Why in the new version 12.2 of Camera raw the menu no longer exists: "save new default camera raw settings" ????It is possible to export / import the .xml file with customized settings.But, once imported, it is no longer possible to set them as the default settings for all the raw because the "save new default camera raw settings" menu is missing which, in previous versions, was present !!!! 

My ACR app has recently grayed out and is not available.  I'm having a great deal of trouble finding help for this issue and would appreciate any suggestions.

Hello! I am using camera raw 9.10.1 and i am looking for the range mask in both graduated filter and brush selection but i cannot find it.What do i need to do to enable it? It is not there at all (i have read that for some people it is there but unable to use it but that is not the case for me)What do i need to do?thank you!

Hi there, I'm having some trouble processing DJI X5R DNGs with Adobe Camera Raw. When filming/photographing with the original DJI 15mm or the Olympus Zuiko 45/1.8 everything is fine. But all DNGs I take with the Olympus Zuiko 25/1.8 show heavy apochromatic refraction AFTER Adobe Camera Raw applies the integrated lens profile.The proxy-files produced by the X5R do not show any problems, it's the same when I process the files with DJI Cinelight, even when I place the DNG-files in Premiere Pro CC and do the color correction with the Lumetri engine, there is no apchromatic refraction.As a test I have used DNG Cleaner for Apple to erase the integrated profile and when doing that, Adobe Camera Raw imports the DNGs without integrated profile and without any apchromatic refraction.The downside of DNG Cleaner is that it is one more step in processing the RAWs, and Premiere Pro will not accept the files produced by DNG Cleaner.So it would be great to have the possibility to deactivate the integr

Just got the Canon EOS RP and Photoshop CC 2019 won't open the file . Get this error message."could not complete your request because it is not the right kind of document". I have updated Adobe Camera Raw to 11.2 and unistalled /reinstalled PS. Still no success. The file format is .CR3 like the EOS R. Any suggestions?

Cette nouvelle version a supprimé la possibilité de choisir ses paramètres par défaut dans la section réglages de base. Les réglages par défaut d'Adobe ne me conviennent pas du tout et maintenant, je dois pour chaque photo modifier mes paramètres. Pourquoi adobe à supprimé cette fonction???????Espérons qu'a la prochaine mise à jour cette fonction reviendra.   

Hello. Every time I open a RAW/CR file in Bridge the default sharpening is set at 40. How do I change this to 25 so that every time I open a file the sharpening will be set at 25, not 40. If it matters I use Windows 10 64-bit. Thank you.

the tab to set specific camera default for raw conversion is gone in this newest version of camera raw, how do you set it for each camera body

It looks like command line parsing in DNG Converter 12.2 is completly broken. Following command "C:\Program Files\Adobe\Adobe DNG Converter\Adobe DNG Converter.exe" -u -p0 -dng1.4 -d "C:\TEMP\" -o "IMG_5983.CR2.tmp" -l "C:\Users\user\OneDrive\Work\Images\RAW+JPG\IMG_5983.CR2" run from Windows cmd window works perfectly using DNG Converter 12.1 (and previous versions), but after installing DNG Converter 12.2 version it:sometimes correctly writes "C:\TEMP\IMG_5983.CR2.tmp" filesometimes generates "C:\TEMP\IMG_5983.dng" filesometimes generates "C:\Users\user\OneDrive\Work\Images\RAW+JPG\IMG_5983.dng" filesometimes generates "C:\Users\user\OneDrive\Work\Images\RAW+JPG\-p0" filemost of the time does nothing

Camera Raw does not start completely and gives an error. The sliders are no longer displayed. The Photo (NEF) is shown. The latest version of camera raw has been installed.

In cases where I don't want to upload all the files from my Nikon Z6 camera card using the ACR file upload, it would be nice if I could see the thumbnail photos like I can when uploading from my Nikon D500 camera card. But all I can see using the Z6 camera card are icons that look like daisies. I'm using the current version of ACR from Photoshop CC. Is there a setting I'm missing? TIA

1) so i downloaded and installed ver. 12.1 from adobe site.2) after installation, the .exe file was installed in the adobe dng converter folder along with three - .dll files.3) however, i cannot launch the ,.exe file at all.4) also, the program does not show up on the list of installed programs in the uninstall/change program window.5) i am running win 10 ver 1909 which meets the system requirement,the .exe and .dll files are dated 11/20/2019the .exe file size is 103,818 kb. the .dll files sizes are 259, 124, and 88 kb. any suggestions on what i can do are greatly appreciated. NOTE:  after the program was installed on a fully charged surface pro tablet which has been inactive for 3 years, i updated the time and date.  i'm not sure if this may be the source of the issue.  so, i decided to update the tablet to ver 1909.  also, i believed i installed the program on a win ver below the required 1703

We are happy to announce the release of Camera Raw & DNG converter 12.2.   What's in this release? Feature enhancements New camera and lens support Bug fixes to some of the top customer reported issues.   To update Camera Raw to 12.2, click "Update" in the Creative Cloud desktop app next to Camera Raw.  More detailed instructions for updating

The Canon EOS Rebel T7, 1500D, 2000D (same exact model with different country names) camera profiles render properly using the camera's 'As Shot' white balance settings, but display a very high and incorrect Tint value in the LR 8.2.1 Basic panel. In addition when using any of the Basic panel WB presets (Auto, Daylight, Cloudy, Shade, Tungsten, etc.) set for the actual shooting lighting condition the image takes on a strong yellow-green tint shift. More details at the below Lightroom forum post:https://forums.adobe.com/message/11016301#11016301

I use ACR virtually always.  I click on my raw file and bingo, it's up in ACR.Then I mess, adjust, linger... and open in Photoshop.  But now by base image has been adjusted.  How about an option that would leave the basic raw image in as background once you've entered Photoshop editing, and what you messed with as the first layer.  Then you would always have the base, unedited, to refer to, or dupe for some reason.  Just would be nice to have the option to keep that base image in as the, well, base image. 

Camera Raw 11.4 makes seamless edge-aware 360-degree panoramas. It doesn't do so on all images, so how does it know that an equirectangular image is a spherical panorama?Is there certain meta data required, and if so, what?If metadata is required, then it would imply that some image types can not be edited in this way, such as PNGs?If I don't have the required metadata, how can I add it, or is there a checkbox to enable seamless edge-aware editing?

So this is a multi tiered problem. Shot some aurora pics the other night. First time I used a Rokinon 20mm f1.8. This doesn't look as if there's a correction file in existence for it. When I opened the files in Lightroom they were blurred, almost foggy looking. When I open the files in Camera Raw the focus appeared fine. That brings me to the second issue. When I use raw and it either comes time to save n export or to open in photoshop, it almost always stick me these swirls marks all over the image. I can not even get people to agree on what they are called much less how to stop them, I also get this affect when saving in photoshop or anytime I flatten an image in photoshop. I'm reduced to zooming to full screen and taking a screen shot before saving or flattening, then pasting it in paint and trimming off any thing that not my picture if I want my finished product to look remotely acceptable. I would just stick with Lightroom if it let me save in any format but it just seems to let m

Camera RAW is not working properly since update to Catalina. Any updates soon?

I have ACR 12.1. I'm noticing that when you view a raw image in ACR, it looks heavily sharpened - even though all the sharpening sliders are set to zero. As I have sharpening set to preview only, the image looks normal when exported to PS. Anything you can suggest to rectify this?