Camera Raw

i just loaded my lightroom 3 into my new computer, i upgraded from win xp to win 10, when i tried to view my transferred files,lightroom doesnt recognize  my nef files ffro either my d200 or my d7000, or d70, id does on my old computer but not my new one. what do i needto do?

Hi,the lens Sigma 10-20 mm F3,5 EX DC HSM for Pentax is not identified by LR. The LensID="8 11".But there is a lens correction profile for this lens. I assume LR should know the lens? In the EXIF section it only says "unknown lens". Is there a way to make LR identify this lens? I know the way to make Lightroom choose the right Correction each time but I am looking for a possibility LR writes the lens information in the exif (e.g. for filtering).If I take a look in the source code of the file there is an entry "xmp:Label="Sigma 10-20 mm F3,5 EX DC HSM"Why is LR not able to display this information?Thanks in advance. LR Version is 6.6.1btw. Apple Fotos is able to identify the lens correctly 🙂

I have been unsuccessful at merging Leica M Monochrom Typ 246 raw images. Leica M Typ 240 color images - no problem at all. I have started a chat discussion with Adobe, and the local Leica store actually duplicated the problem on their computer. I am using Lr 2015.6 Windows 10.  I have tried 2, 3 and 4 images and always get the same message: "Unknown errors occurred"  Merge using Photoshop CC does work with the Monochrom images

I am having issues opening raw files in CS6. I downloaded the camera raw plug in 9.11 (i was told this is the most current/up to date version). Here's what I think is the issue. I have attempted to install the raw plug in at least 20 times. I will go through the process, click finish, then nothing. I click on the plug in again and it asks me if I want to install..... after I JUST DID! I have tried deleting the download all together and then re downloading the plug in about 5 times, no change. I have tried uninstalling and reinstalling photoshop and restarting my computer.Can anyone help?!! I am at a loss and I really don't want to shoot in jpeg just because of this glitch.

I have a NEF that produces an "unexpected end of file" error in both Lightroom 5.7 and PS CC (both with Camera Raw 8.7). The same NEF loads and converts fine in Nikon's Capture NX-D V1.0.2. The NEF also converts fine into a JPEG using the D750's in-camera NEF processing function. I can provide the NEF to Adobe for analysis.

DNG converter says "There was an error parsing the file" when attempting to convert SRW images from some Samsung models after metadata has been edited with ExifTool.  Here are 3 sample images with this problem:http://130.15.24.88/~phil/tmp/SamsungNX2000.srwhttp://130.15.24.88/~phil/tmp/SamsungNX300.srwhttp://130.15.24.88/~phil/tmp/SamsungNX30.srwAlso, the following image is not recognized by the converter after a similar edit with ExifTool:http://130.15.24.88/~phil/tmp/SamsungEK-GN120.srw

Hello, I’m having some trouble with Photoshop CC, specifically with the Camera Raw Filter. I have created multiple ACR presets that I use to apply various photo effects to my images. When I created these presets and saved them, I specifically didn't check any of the settings relating to the Transform, Lens Profile Corrections, Chromatic Aberration, Lens Vignetting and the Camera Calibration panels. I did this because I don’t want those settings to change when I apply one of my presets. The settings in those sections are generally related to the workings of my equipment and I don’t want to have to redo those settings if I decide to apply an effect to my image. This method generally works with one significant exception. Even though I have specifically left Lens Corrections out of my saved settings (by not checking that box when saving the preset), some settings in the Lens Correction panel (specifically the Defringe Purple Hue and Green Hue sliders) always get reset to the default values

Just installed the new Lightroom CC 2015.6 / 6.6 update and i have a really strange issue. All my files are in DNG format. Everything works fine except the files from my Fuji X-E2. Lightroom and Photoshop can't read these anymore! The files get's a black exclamation mark next to them. See the screenshot. All files from the other Fuji X-series cameras works just fine. It's only X-E2 files that doesn't. The files work just fine with any other software and i tried them on a different computer which has the previous version of lightroom CC and there they work just fine!Is there a way to make a roll-back to previous version?

Update to latest LR: Now, moving sliders causes image colors to dim and brighten in a psychedelic way!. Not good. Makes you think video card is going.

I'm using Lightroom CC, Sony A7r camera, generating Sony Raw files (AWR) and my problem happens with all of my Sony lenses (all of them have lens Profile Corrections, but I have it turned off on import). I bring the images into Lightroom without lens correction. When I send my bracketed exposures into Merge To HDR with auto align and auto tone turned off, Lightroom automatically applies the lens correction profile. This is not a problem for most of my lenses as I want them corrected EXCEPT for my Sony 16 mm fisheye converter. I don't want lightroom to correct the fisheye distortion. I talked with someone using Nikon RAW files and Lightroom does not correct their fisheye distortion (don't know about other lenes). How can I prevent Lightroom from applying profile correction to my images upon sending them to Merge to HDR? Thanks

I applied the Recover Edges plug-in to some of my Canon 5D MkIII files because Lightroom CC 2015 honored the in-camera crop I set (and did not turn off!). This worked fine to give me back the rest of the sensor info. I reset the files in the Develop module. However, when I try to merge these "full" DNG files to HDR, I get the message "unknown errors" and the merge fails. Could either the plug-in or Merge to HDR be updated to recognize the full sensor files created with the Recover Edges plug-in? HDR merge worked fine on the original "cropped" files. Thanks.

https://forums.adobe.com/thread/2150220It seems that the WB calibration is messed-up for the 1DX Mark II manufacturer color simulation profiles.Forexample, a WB value of 5100 +17 becomes 4300 -13 when using any of the manufacturer color simulation profiles instead of Adobe Standard.This should be a quick and easy fix by your software engineers I guess? Thanks in advance!

God, trying to find an answer without waisting hours going through these options. HDR 32bit conversion not working after the latest upgrade. I use 32 bit a lot and after running through in the normal way when i go to convert to 16bit instead of it going back to camera raw for adjustments i get a "program error message" and nothing more happens, it stays as 32 bit. Any ideas anyone???

Hi, I'm Bruno from Brazil... I use Photoshop CC for MAC. I did the last actualization two days ago... And now I can't open any file in JPEG format. It show this window when I try to open : "Could not complete your request because the file was not found." Can you help me, please?? ! ! ! Thanks for your att.

I noticed some unpleasent artifacs on hard edges in many of my raws captured with Sony. They seem to appear as soon as the clarity value is raised. Here is an example: And enlarged: When leaving the clarity at 0 there are no artifacts visible: The raws were captured with a Sony A7II camera (uncompressed). I do not know if these artifacts only occur with Sony raws or also with raws of other manufacturers. Note: I already posted about this issue here https://forums.adobe.com/thread/20652...

Massive issue after updating to Lightroom 6.3. The “Default Develop Settings” isn’t working, the settings are reset every time you start Lightroom. I’ve got hundreds of default settings for different ISOs saved for a number of cameras, all don’t work. The folder with the Default Develop Settings still contains all my defaults: C:\Users\\AppData\Roaming\Adobe\CameraRaw\Defaults. But they don't load anymore with Lightroom 6.3, so when I hit "reset" on a photo it resets the photo to lightroom default values instead of what I set in the "default develop settings". When I try to set a new “Develop Setting”, let’s say, default develop setting for clarity on ISO100 photos is +10, it works for the duration of my lightroom session, BUT as soon as I close lightroom and restart it, the default develop setting doesn’t work, i.e. when I click "reset" on a photo, it resets the clarity back to 0 which is the lightroom default and not +10 which is my default for the ISO100 photo (this is of course a s

I have just gotten a Sony A7RII but LR 5.7 is unable to read my RAW files from the camera.  Any advise?

Hi thereHow do I install a the latest camera raw plug in for Photoshop CS4, it's giving me an error "UPDATE FAILED" Contact customer support for further assistance.Thank you!Jo

Hi,I've just purchased the Canon 7D Mark II, connected it to my PC, but then found that Adobe Camera RAW doesn't support it yet. Any updates when this camera might be possibly supported? 

  I purchased an Olympus OM-D Mark II and downloaded Camera Raw plug-in 9.1 onto Photoshop CS6 (on a PC). I now realize that 9.1 is not compatible with CS6. Photoshop CS6 has always been able to download images including raw files from my Nikon D800. Now, CS6 does not download any images from the D800. I have tried to locate the Camera Raw plug-in 9.1 to uninstall it, but it does not appear on the program list to uninstall. Plug-in 9.1 is shown on the plug-in list below Camera Raw 7.0. How do I get rid of Camera Raw 9.1 and go back to the default Camera Raw 7? 

HiI suddenly have problems with my exposure slider . He alsways jumps back to a full number as soon as i use any of the other sliders . ig it set it to  0,8 use than another slider and the exposure slider jumps back to  zero, or from 1,4 to one . Anybody has some advice for me ?Regards