Camera Raw

El proceso del asunto lo he seguido intuitivamente, dando como resultado un problema, derivado de mi ignorancia, con archivos virtuales que Windows muestra en miniaturas de color (son en blanco y negro) y asuntos como borrarlos y que no aparezcan en la papelera etc.Todo ello puesto que cerré la edición con "Abrir en ACR" y no con "HECHO" y pasos siguientes en Bridge. He sguido los pasos lógicos en búsqueda de formación, pero no encontré respuestas adecuadas. Pido, por favor, que alguien me diga dónde puedo formarme en esto.Gracias anticipadas

This post applies to Camera Raw.Post Lightroom Feedback here   This thread is now closed. Please update to Camera Raw 17.x. If you wish to provide feedback, please go to the new article.   The Photography team is sharing an early look at Generative Remove, which makes it easier to remove unwanted objects and distractions, even on complex backgrounds, with a simple brush stroke. Generative Remove is powered by Firefly AI.   How to use Generative Remove on a desktop: You can find Generative Remove under the newly renamed Remove panel (aka “Heal”). Make sure the “generative AI” checkbox is enabled before you start brushing (note: when unchecked, Lightroom will use Content-Aware Remove to fill your brushed spots).  By default, you will be given a moment to refine your selection with an add or subtract brush. Remember to include shadows for a more accurate result! You can also skip this step by holding down ‘CTRL’ on windows or ‘CMD’ on mac as you finish your bru

Hallo ihr Lieben, ich habe folgendes Problem (und bin auf den Hilfeseiten und hier in der Suche nicht fündig geworden): Wenn ich RAW-Dateien in Photoshop öffne oder bei einer bereits geöffneten Datei den Camera RAW-Filter öffnen möchte, tut sich... nichts.Klicke ich irgendwo anders hin, ertönt nur der übliche Fehler-Ton von Photoshop (als würde es noch laden und deshalb gerade keinen anderen Befehl annehmen). Auch nach längerem Warten (ich habe zB mal über 10min gewartet um es auszutesten) passiert rein gar nichts.Photoshop lässt sich dann auch nur via "Task beenden" schließen obwohl es laut Task-Manager nicht abgestürzt ist.Laut Photoshop wird die Grafikkarte erkannt und ist kompatibel (laut Lightroom wird sie vollumfänglich unterstützt). Hat jemand dasselbe Problem und / oder weiß Rat?Ich habe die Creative Suite schon vollständig inkl. Einstellungen deinstalliert, PC neugestartet und alles wieder installiert - Erfolglos.Natürlich kann ich die Dateien in Lightroom bearbeiten

Bonjour - J'ai un abonnement photographe Creative Cloud mais je ne parviens pas à ouvrir Camera RAW. Je viens pourtant de mettre à jour cette application. Pourriez-vous me dire comment démarrer Camera RAW. Par avance merciCordialementJYD

I'm trying to add my first LUT into camera raw. Following tutorials I've found online, it says to open an image in Camera Raw, click the three dots next to the profile options, and then - while holding the alt key on windows - select the create preset menu option. On my system, as soon as I press the alt key, the menu disappears and all the camera raw settings change to a reset mode. Am I doing something wrong?  I appreciate any help I can get.   

I have a lot of problems managing my NVIDIA graphics card using camera raw. It seems like it doesn't manage the ram well. My work slows down because it works slowly. Does anyone know how to solve this problem? My graphics card is RTX40. Thank you 

Hi @ all.I m working every day with camera raw.During the last years, i noticed that it is getting slower day by day.A few years ago when i moved from one photo to another, the photo was changed immediately.Now i have to wait 3-4 - 10 seconds.When i work with some masks, camera raw is getting slower.When i want to off one mask for example (click on the eye icon), it need 4 5 seconds to disable the mask.Actually i m working with a Mac Book M1 PRO MAX. in 2022 camera raw was "smooth as butter" now.. same hardware same camera it is very slow.I spent a lot of times looking for a solution.I Installed old version of  OS but nothing is changed.If is for you the same please upvote.If you found a solution, please let me know how.Camera raw is a must and a standard for pro and it must work super fast on good hardware.

I have intel i9 13th generation with nvidia RTX 3060 12Gb OCWith 64GB DDR 5 ram but getting slow during working time and preset applying time. lightroom their is no lag also with preview of presetplease update the bug in camera raw now using camera raw 16.5

I cannot open a jpg-document in Bridge as "Open in Camera RAW"

I have an OLD version of photoshop (v12) that doesn't support my .NEF (raw) files from my new Nikon Z6ii. The Camera Raw plug-in is v6.7. I downloaded the latest camera raw plugins from the Adobe site and installed them, but i'm still getting an error.--> Is my version of Photoshop to old to ingest the newest Camera Raw plug-ins? I'm using Windows 10. Here's some of the system info. from Photoshop:Adobe Photoshop Version: 12.1 (12.1x20110328 [20110328.r.145 2011/03/28:10:30:00 cutoff; r branch]) x32Operating System: Windows NTVersion: 6.2

When I use Denoise on RAW images, the images are putting strange squares on the DNG once it is created.  this was after the latest update on both mac and adobe lightroom.  I've spent HOURS on adobe customer service, don't know how to fix this.  I love that feature.    

T Adobe DNG Converter command line interface documentation, it says `-jxl_distance 0` means losslessI did my test on a 24MP RGB raw image, when using `-c -jxl_effort 9`, the output is ~80MB, takes ~2s, when using `-jxl_distance 0 -jxl_effort`, the outptut is ~50MB, takes 20s. Why is there a difference? Are they 100% equivalent? 

camera raw not work selection subject people 

This used to happen one in every few hundred, now it's happening to every one in 5-10 max. It is getting beyond frustrating, having to redo every image again. Does anyone know why and how to stop it? I did find another post, and tried what she was told, but it didn't stop it happening for me.

Help! Read loads of stuff on this but still can't get my raw files to download on to lightroom. I'm a total rookie having just started with lightroom so any help is much appreciated. My raw files are supported by lightroom: CR2 from my Canon 1Ds Mark II. Do I need to dowload the Camera Raw plug in to make it work? Files seem to be downloading but then after a few minutes it just fails. 

would love to not have to cross the screen and back every single photo edit...

Привет всем, такой вопрос? Обновил версію Camera Raw 16.5. и она перестала откриваться, пишет что тренується ускорение графіческого процесора, а в настройках что система не поддерживает ускорение графики для камери Row. Подскажите как ето исправить, или вернуться на прежнюю версию Camera Raw?Буду очень благодарен за помощь уважаемие...

I was getting great results when editing Nikon D850 and iPhone raw files in ACR, exporting into AVIF HDR (with Display P3 profile). I used the "Convert and Save" button at the upper right corner of the ACR window.But then I upgraded to the latest version of ACR (16.5.0.1953). Now, when I convert the same files, using the same settings, the AVIF versions only display as SDR, when viewed in Chrome, Photoshop, or GraphicConverter. Nothing else was changed - only the upgrade to ACR 16.5. If I export to PNG or TIFF, the files display correctly in HDR. It is only AVIF files that are affected. When I examine their metadata, certain HDR records are missing, which were present in the AVIF files exported from ACR 16.4. All my ACR and Photoshop settings are as recommended for HDR output, in tutorials by Eric Chan, Greg Benz, and others. I tried the usual remedies: rebooting, deleting ACR preference file, cache flush, etc. Is anyone else seeing this? If not, is it possible that my i

Hello all, I'm running the latest Brisge/camera raw/photoshop updates available today (9/16/2024) and I have found that when I have open 15-20 images to process, after working for a few minutes I find things get slow (crop and other adjustments) start getting laggy. Files are DNG converted Sony A7rIV (not lossy compressed)PC is running Windows 11 (latest updates)NVME SSD'sRyzen 7 7700x64g ramRadeon RX6600 8gig (latest drivers)No other apps running (not even photoshop at the time) Usually things work just fine but this happens on occasion. I don't see Bridge/Camera Raw using more than 35% cpu. CPU is not running hot and throttling down. I'm trying to figure out what I can do to minimize the slow down. I can load less images at a time but in the past I haven't really seen this even with more raw images open for processing in Camera Raw.Any Ideas or similar experiences?

hi there can i set custom hotkeys in adobe camera raw?

Getting this error message while using camera Raw in bridge Graphics Processor has encountered an unrecoverable error. GPU acceleration has been disabled for the remainder of the session. Specs are....Processor14th Gen Intel® Core™ i7 14700OSWindows 11 ProGraphicsNVIDIA® GeForce RTX™ 4060Memory16GB DDR5, 2x8GB, 5600MT/sStorage1 TB SSD

Hello all! So I ran into this weird problem, when I used Bridge/ACR on an older MacPro with Mojave the other day. I was editing RAW files from my Nikon D810 which worked totally fine, certainly fast enough to be a pleasurable experience.Later I worked on RAW files off a Nikon D7100, which was absolutely horrid. Camera Raw kept slowing down with spinning beach ball and being unresponsive for several seconds. I would have assumed that those D7100 files, being smaller than those D810 files, would have worked even better and faster. How is it possible that Camera Raw is this picky, especially when the files should have put even less strain on the CPU?Doesn't make sense! I hope somebody out there has an idea, because when things are bugging me, I want to get to the bottom of it 🙂 Thanks 🙂 Ginger

I find that the User Guide under Adobe Creative Cloud Learn & Support are way out of date. ACR has had so many changes in recent years that the documentation is mostly useless. I have been using ACR for years and (mostly) following along with the changes - I can only imagine how frustrating it must be for anyone new to ACR who consults the documentation.Specifically I wanted to brush up my understanding of Presets and Profiles. It has been a number of years (and many versions of ACR) since I last built a default preset for my camera. And I have also been playing with creating a camera profile. So I went to the read the online documentation for these topics, and wow - it's so old it bears no resemblance to the application anymore.If anyone knows of any 2024 relevant documentation for ACR Profiles and/or Presets I would appreciate a point in the right direction. Thanks,Peter

I'm trying to use the lastest DNG converter cmd to generate JXL DNG for my raw files. I'd like to encode with -lossyMosaicJXL, but setting -jxl_distance doesn't not work with it. Is there a method to set the distance for it? Thanks.