Camera Raw

Hi, I have acquired a Nikon Z6 II but cannot open RAW files from it. I just get the message 'Photoshop cannot open this file' and a link to a page that's 404 not found. I have an Intel iMac, Catalina 10.15.7, ACR 13.4, Bridge 11.1.1 and Photoshop 22.5 - all updated today.  And restarted the system a few times.The Adobe 'Cameras supported by Camera RAW' page suggests it is supported, apart from there being no camera matching profile. I've tried opening via Bridge and via Photoshop. So can Photoshop open Z6 II files?And if so, what can I do to make it work? Thanks,-Michael

I am having an issue with not being able to open NEF files from a Nikon- s6ii.   I upgraded to Camera Raw 12.4 yesterday which as far as I know is the latest version availble for Windows 7.  I also have Photoshop CS6 v 13.0 x64 and Lightroom v4.4. Is there any hope of compatibility?

When working in camera raw window, if I saved a snapshot, then reset my recent adjustments, by clicking reset (Option + Cancel on a Mac), previously ACR would reset the settings to what they were when I opened the image this session, but it did not touch the snapshot. I found out the hard way that this version now throws away the snapshot, after I spent a while working on a raw image, and tried to see its before state. I know I can click and hold the “eye” button, but that resets all the changes I made to the image since it was shot, including my import preset, and not just this session. Previously if I reset things, the snapshots would be saved, so I could go back to any of them. This was handy if I forgot to save a snapshot before making any changes, and I wanted to see what I had done this session, I could save a snapshot, reset my changes, then create a snapshot of the “before state. I think this is how ACR should function, and hopefully in the next release you can change

I wanted to batch convert some RAW files to JPG using Image Processor, and to deal with the lens distortion in the RAW file I had to click the "open first image to apply settings" option, then enable the lens file correction in Camera RAW. The first RAW do convert correctly, however the second RAW file was not converted as I wished: The white balance, for example, was set the same as the first RAW file! What it should behave is to follow the default "as shot" white balance for each RAW file, not inherite the white balance values from the first file. Thank you.

I've searched the forum and elsewhere but can't find an answer. My usual workflow when cropping begins with keeping with keeping the aspect ratio to original. However, clicking on the crop tool it always begins with custom. I have to change it and also click constrain to image. Anyone know a way to change the default on that to "original" aspect? Thanks.

Prior (like forever prior) to 21.2, you could scrubby zoom in ACR just like in Photoshop, hold command-space (or option-space) and scrub. Now, it works different--it puts you in scrubby zoom by default. I guess this is OK, but it drives me crazy, especially when I open the Camera Filter from within Photoshop.Drives me crazy. Is there a setting to put it back before 21.2 was foisted on me?

Hi all, I have a bizzare one! I am trying to open a set in Photoshop to process tabout 50 RAW files and for some reason it is opening (12) images first- then the rest in a second batch. The (12) aren't sequentially first in the set and are randomly pulled from throughout it so I can't just start there and edit the reminaing images later. It's not happening with every set so I am really confused and definitely need to fix this! Camera Raw and PS are up to date- images are being dragged in from Photo Mechanic and were shot tethered in Capture One if this makes any difference! Thanks!

When I open a raw image ACR 13.4.0.872, and apply say a Graduated filter setting, then go to the Adjustment brush, the Adjustment brush keeps the exact same setting from the Graduated filter. If I go from Adjustment brush to Graduated filter, the same thing happens. If I close the image and open another one, the old settings are kept in whichever tool I open next. I never noticed this issue with previous versions of ACR. I should not have to reset the all the settings each time I go to each of those tools- ideally the tool would keep it’s own distinct settings from image to image, no matter what I set a totally different tool to.

Buongiorno a tutti,Ho riscontrato questo problema dopo l'ultimo aggiornamento usando la correzione profilo.Solo con la focale Canon RF 24-240 mm.Qualcuno mi sa dire qualcosa?

Now when opening a file in Photoshop with Camera RAW, it doesn't leave the extension (CR3 in my case) and hyphenates it from how many times that filename has been opened. Seems ok, but then my actions that are set to save files now forces the name of the file into the action. Thus running a batch or even one action writes over the previous one because the name is being forced rather than maintaining the original filename. Anyone else experiencing this or did Adobe just totally screw those of us over that batch process newly opened RAW files?

Hi there,i've already posted this issue a few months ago. Unfortunately the latest updates didn't solve the problem: I am using Camera Raw for my Architecture work on a daily basis. One of the most important tools is the "Upright" function. Since a few months this function is completely out of control and super laggy.  The magnifying glass and the drawn lines are not moving synchronal with the movement of my mouse. There are massives lags! Any ideas how to solve this issue? I am working on an iMac (Retina 5K, 27-inch, 2017) - macOs Catalina 10.15.7.Would be thankful for some advice.Best regards

Can anyone please advise where I can download Camera Raw 6.7 ?  I have looked on the Adobe site but cam only find more recent versionsThanks 

Just tried editing an image in Photoshop 2020 for the first time in a while. When I opened Camera Raw to make some edits this is what I saw. Anyone know how to fix this?

I have tried reinstalling, rebooting this program but entries don't stick . For example, select location to save converted images, embed original raw file,  and custom compatibility-linear entries instantly revert to default. There is no way to apply or confirm settings and the issue is not addressed in installation directions.Please help,Arnold

Since updating to ACR 13.3 if I have multiple dng files open and I am pressing Shift a window pops up with "Analyzing image" very briefly and all basic setting names change to Auto. The problem is that I use shift to select multiple files in the filmstrip, but the window that pops up stops me from doing that in my normal workflow if I don't do it extra slow. I reverted back to 13.1 and the shift key behaves normally again, no interruptions.   Windows 10 with Bridge 11.0.2

I am unable to see the options like Amount, Radius ,Details and. Sharpening and the noise reduction details.I could see just 3 options. Recently I just updagraded Mac OS to Big Sur, thats it. .

Hi.  I can use all the functions of Camera Raw and open the edited picture in PS to finish any kind of editing and then save it but if I use the enhance option first it is impossible to see any difference (enhanced/without enhance) and second if I continue on the Camera Raw Save Status I receive the message "There was an unknow error".  I can't understand what's wrong.

Why has super resolution started renaming my files to "Merged" instead of using the original file name + "Enhanced" suffix

Hello, I am on windows with latest updates for it and PS, LRC, Bridge and camera raw.In camera raw you can no longer use shift key to change number fields. It switches to auto and grays out screen till you click and then it zooms. very anoying.  any options?

When selecting an area to enhance (increase or decrease exposure, etc.) using Radial Gradient, it changes the selected area's color. In particular, it changes it to purple. Why?

  On August 24th, feedback.photoshop.com will become read-only as we migrate top and recent content over to community.adobe.com.   Currently, the community on community.adobe.com is used as a destination for customers to ask questions and engage in peer-to-peer conversations.   Beginning August 31st, migrated content will be available on community.adobe.com and the Adobe Community team will introduce two new modules – Ideas and Bugs – for the Photoshop ecosystem, Lightroom ecosystem, Lightroom Classic and Camera Raw and DNG. This will allow customers to report bugs and/or submit feature requests directly to the product teams. In addition to Ideas and Bugs, the Adobe Community team has reworked the layout on all the community landing pages with the goal to provide a better navigation experience for our customers.   The goal is to provide customers with a single community destination to manage all support and engagement activi

I updated to Lightroom 10.3 (from LR9.4), and when I did so the colors in my images changed and have taken on a green/yellow cast. The image on the left was exported from LR10 and the image on the right from LR9. Absolutely nothing changed in any of the settings. All of the images in my LR10 catalog now have a similar green/yellow tint. Has anyone experienced this and is there something I can do to fix it?  

Will there be an update to support NEF files from the new Nikon Z fc camera?