Captivate

Hi,So, I have a user logon screen that I have created where the username text entry box has to match a VAR and the same for the password. I also have a button in which restarts the process, so on this button i have an AA that resets the VAR to null. But when I go to enter the username again it contains the text from the previous try. How do I get it, so this doesn’t happen and it is either blank or shows the original text of 'Enter Username'.Thanks in Advance. 🙂

I've created a responsive project and it looks great on desktop but when played landscape on any mobile device it is too large. And on the (oldish version) iPad it does not play at all. Do I need to create a new size version for each devices.Thanks

Hi there, i have a very disturbing problem in Captivate  recently. Back then i was a postproduction Audio engineer. Thats why i wanted to spice up my new captivate Project with some self made Sound FX. I applied these FX to the Clips of Symbols and Illustrations, (not to slides or background; my slides have Narrations and i have a Background music). I syncronized the sounds that i made by editing them carefully and made a whole Project with nice sounds and Illustrations. I published an HTML to see how it goes and saw that many of the Sound FX that i created are cut in half or they are non syncron (starting late). I did toggle back and fort with navigation and checked the same slides again. I realized sometimes it plays the sound correctly, but often not.In my project on timeline everything sounds perfect. But when i export the project in any form, many of the FX that i designed does not sound as they should do. Do you have a solution for that... PS: Btw i am usign *

I have to prepare a project that have slides and random questions together.Because of for forcing students directly WATCH LESSON, project must be run directly in full screen and no navigation buttons, no close button, no foll screen button, no resize screen button, no permit a new PAGE on the SCREEN. I prepaired a sample project with ADOBE CAPTIVATE 2019, published to computer, upload to CAPTIVATE PRIME.But I'm not able to do-run directly in full screen and no navigation buttons,-no close button,-no foll screen button,-no resize screen button (close full screen button),no permit a new PAGE on the SCREEN. I need your help.This is my sample project. You can download.http://muvuem.mumeyek.org/mumeyek_sample_project.zipThanks for your help.

I purchased Captivate 9 in 2017 - I did not upgrade when 2017 came out. I have a MacBook Air running Catalina OS and now when I try to open Captivate it quickly closes. I can't find the program specs for 2015. When I look at the 2019 version it doesn't state that Catalina 10.15.6 is supported. Is my only option to buy a whole new install of Captivate? Will 2019 work on my new Mac? Discounts for older programs or Ed users? Thanks for any help. I wanted to work on my course today and now realize I am out of business with the old version.Lorraine

I have a project where I'm inserting a Youtube video(interactive video option). Unfortunately, during the inserting process, it stops at 50% and doesn't finish(I've waited for at least 10 minutes). Any assistance would be much appreciated. Thanks.

Has anyone tried the Captivate quiz reporting widget available from CPGURU? I believe it can send quiz questions and users answers directly to Google sheets. As I don't have an LMS at the moment this could be extremely useful to me but I would like to hear from anyone who has used it before I buy it.

Hi All,In Captivate I know you can create a question slide with multiple "Fill in the Blanks" (or drop-downs). I'm wondering if you can do the same when importing the same type of question in a CSV file?(CP version 11.5.1.499) RegardsDonal.

Building a course where I use the default progress indicator included on the question slides, but it is splitting the content in 2 rows, as on the image:This is responsive project and I am seeing this issue on any device (computer, tablet and smartphone). I tried resizing the shape, locking the size and position, but always it's going back to some default size (to fit the text probably). Interesting thing is that I am seeing this content OK in Adobe Captivate when I open the project (image below): In practice, I would need the shape to be at least 2-3px wider, but I am not able to set up the width. I tried px, %, locked size & position without any success.

Hello all,I'm using Captivate 10, and I am trying to do the following:Ask a user a questionThe user should have 5 text entry boxes to answerEach text entry box should be worth 1 point and is reported in the quiz itselfDo not show the user the correct answer or provide feedback, just move to the next questionI know this is going to require some advanced actions or some JS. I've read into other posts on here and have created a "submit all" button, and while I can make them work if the TEB's aren't graded, I can't seem to get it to work if they are graded. I've also tried researching this, but can't seem to find a solution that would fit the problem at hand. Does anyone have any recommendations on this topic?

Dear all, I would like to have Adobe Captivate installed on a network that is not connected to the Internet. Is there a way to do so? kind regards, Pascal DANIELS

Hello, I created a captivate file with html5 output. the audio is in English and I need to enquire as to the possibility to add subtitles in multiple languages.Does Captivate support this and how would I proceed?Thanks

My training has muultiple objects that change the state of an object and rollovers  of objects that add content to those states.Example:Click 1 - Change object A to state 1Click 2 -  Change object A to state 2Click 3 - Rollover state has multiple objects that are shown on top of object AClick 4 - Rollover state has multiple objects that are shown on top of object A My headache is that some objects in object A sttates will end up on top of Rollover states. Adjusting layers is simple on a slide but when in state view, I cant even tell what each objects name is much less what will block it in the final pruduction.

Hi everyone. I am a longtime Adobe user but extremely new to Captivate. I am super excited to use this for my music curriculum, but as I am considering the scope of my projects and the possible branching scenarios among them, I have a key question: if I were, say, to devise incidental lessons for the guitar or keyboard etc, could I at a later date combine these smaller projects into one larger "master project" with interrelated branching paths/logic across the pre-existing projects? I hope that makes sense, thanks in advance!   🙂  ~Scotty Perey, The Music Compass

Hello, We've had an issue in our organisation where by an exported Captivate project, is not being read-aloud in a browser, even though the accessbility option is selected. This used to work fine and appears to have stopped working. After doing some testing all morning, it appears if the project is responsive then it works fine, and reads the text aloud. If it is a standard project, then it does not. It's almost as if the text gets made into a bit map image and therefore cannot be read. This never used to be an issue, and now a visiually imparied employee is unable to compelte the eLearning. Thanks. T

Hello Friends,I am publishing my cpt files into HTML, white patches at bottom from end to end appeaing, please suggest the solution, screen shot attached for the reference. 

When we play the SCORM file in Local, it generates warning errors but plays, the same file when we test this file on SCORM Cloud, we encounter no errors. When we upload the same file in our application, it doesn't work though it works with other SCORM files. What could be the issue here? How can we fix this?

I have a simple drag and drop project with one drag source and four drop targets, one of which is correct. I need a solution for the following: 1. When the user clicks submit without dragging, they should see a message that says "You need to select your option". Currently it is giving me a standard failure message. 2. When the user drags to the wrong answer, and hits submit, the failure message should say, "Wrong answer, try again" Following a solution posted by Lilybiri, I created a variable (v_failure) and assigned it to the three incorrect options, but it's not working. I must be overlooking something very basic. I can attach a cptx file with a simple representation of what I want to accomplish. Somehow I'm not able to attach it. Fyi -- I have non-existent javascript skills (I have started learning only recently), and I'm also fairly new to Captivate.  Thanks! 

I'm working on a project that contains a few videos. The client wants the playbar for the videos, but without the scrubbing option. As there is no such functionality in Captivate 2019, I used a code (given below) that I found online. For the shorter videos, this code is successful in disabling the scrub feature. However for the longer videos, the scrubbing suddenly pops up in the middle of the video. Is there any other way to disable the scrub feature? // hide the slider thumbnailvar thumbEl=document.getElementsByClassName('playbarSliderThumb')[0]thumbEl.style.display='none'// disable drag and click slider navigationif (!cp.playbar.mainMovie._jumpToFrame) {cp.playbar.mainMovie._jumpToFrame =cp.playbar.mainMovie.jumpToFramecp.playbar.mainMovie.jumpToFrame = function(a) {var stack = new Error().stackvar callerIsNotPlaybar =stack.indexOf('HTMLCanvasElement.moveSlider') == -1&& stack.indexOf('PlayBarSlider.moveSlider') == -1if (callerIsNotPlaybar)cp.playbar.mainMovie._jum

Wanted to understand if we can create a SCROM course, give it to the client and have it auto expire after a specific period of time.

Hello,I have been creating my lectures on Adobe captivate and using the HTML 5 files. I load these to canvas and create a link for students to open in a  new tab to watch lectures. Since 8/31/20 my videos no longer loads. It gets stuck in a spinning wheel. My old videos still woks. Even if I upload an old video that used to work no longer works. These simple HTML without any SCCOM added. They are all disabled.Is there anything changed?Please let me know,the loading picture   

Does End user required License OR NOT ?   For Training Material reading purpose which are preapred using Adobe Captivate 2019. For example: one my team member who has Adobe captivate 2019 lincesne  version software , he prepared training material and hosted on our company server, now from end user perseptice does end user also required license of Adobe Captivate to watch training material. ? Please give me clarity on this . ThanksAkshita Awasthy

Just got a new computer and installed Captivate 8 and opened one of my projects. The workspace is larger than my screen. I cannot access the properties tab or the library tab. The exit button and minimize button are not visible. How do I resize the window so I see the whole workspace. I've got the view magnification set to best fit and I've tried all of the others as well.

I have created an audio player using HTML5 and javascript. This is embedded as an HTML5 animation. There is a play/pause button and a stop button. This player is located on a smartshape that is hidden. When a user clicks a link, the smartshape appears and they are free to play/pause or stop the audio. My dilemma is when they close the smartshape, is there a way to to stop the audio? The second question is if I have more than one audio embedded, is there a way to stop one player when the second starts? I've attached a screenshot of the smartshape with the player. The HTML5animation is actually a zip folder containing an HTML page, CSS, the javascript code, images of the bottons and an mp3.

Can one pan and zoom in on an image much like Prezi and Articulate Storylines zoom region tool? I know there is the zoom area, but it seems this only zooms "out" of a certain part of the image and not "in" to the image itself? I wanting to zoom into the image much like the pan and zoom for the videos. Thanks