Feature Requests

Support for Photoshop, InDesign, and Illustrator files in the Frame.io ecosystem was announced at MAX 2024. It would be easier to take advantage of this new feature if there was an option in the Share for Review dialogue box to share to Frame.io instead of creating a generic share for review link.Adding Frame.io as a review tool for all creative workflows is a great idea that I would like to take advantage of with my team and stakeholders, but as it stands the process of getting a .psd, .indd, .ai file into frame.io by saving the file, then opening a browser, logging into frame, creating a new project, uploading, and then sharing is going to take too much time compared to the current Share for Review feature. There is a comparison workflow video comparing the two side by side, attached.

Support for Photoshop, InDesign, and Illustrator files in the Frame.io ecosystem was announced at MAX 2024. It would be easier to take advantage of this new feature if there was an option in the Share for Review dialogue box to share to Frame.io instead of creating a generic share for review link.Adding Frame.io as a review tool for all creative workflows is a great idea that I would like to take advantage of with my team and stakeholders, but as it stands the process of getting a .psd, .indd, .ai file into frame.io by saving the file, then opening a browser, logging into frame, creating a new project, uploading, and then sharing is going to take too much time compared to the current Share for Review feature. There is a comparison workflow video comparing the two side by side, attached.

I submitted this feature request about 20 years ago, so it seems like a good time to try again.Can we get preview for the Stroke and Fill commands? And with Stroke, how about a warning message if the Outside or Center option is selected and the stroke (or part thereof) will fall outside the current canvas?If we want to go whole-hog on Stroke, what about making it a Shape tool/.command? Perhaps with the option of what corners to use with Outside and Center when creating polygon strokes?

Me and some of my clients are still using old Mac Pros, upgraded to the max with fast M.2 SSD‘s, 32GB of RAM, 3,33GHz Intel Xeon CPU’s and graphic cards with up to 8GB. They still run fast and reliable under Ventura 13.7.0 via Open Core. For Windows PC‘s this is more then what is required, why not for Mac‘s?  ----Einige meiner Kunden und ich selber auch benutzen immer noch alte Mac Pros, aufgerüstet mit schnellen M.2 SSDs, 32GB RAM, 3,33GHz Intel Xeon CPUs und Grafikkarten mit bis zu 8GB. Sie laufen immer noch schnell und zuverlässig unter Ventura 13.7.0 via Open Core. Für Windows-PCs ist das mehr als das, was auf Ihrer Webseite als erforderlich angegeben ist, warum gilt das nicht auch für Macs?   

Hi,I think it would be wonderful if WebP could also be used in Export/Save for Web. Instead of JPG, we now use WebP in our merchandise management as well as in our online stores. The export route would be much easier than always having to use "Save Copy as...". Would this be a good functionality for others? Greetings,Micha

I'm an illustrator, and I'm aware of a surprising limitation in Photoshop.My wish is that the colour of my brush (brush tool) changes (dynamically) with (at least) 3 or 5 colours WITH THE PRESSURE OF THE STYLUS on the tablet (WACOM for example). One possibility (it seems to me) would be to use ‘Colour Dynamics’ in the ‘Brush Settings’. I could (for example) vary the colour of my brush with the PRESSURE OF MY STYLUS (on a Wacom tablet, for example). However, alas 3x alas, this colour dynamic is linked to the 1st and 2nd plan colours. In other words, ONLY TWO COLOURS!On a computer costing several thousand dollars, in 2024, I can't have more than 2 (TWO!) dynamic colours on my brush!Please, Adobe. Change that!Like textures (in the brush settings -> textures are integrated into the settings), would it be possible to define available colours (2, 5 or 10, more?) in the colour dynamics (linked to stylus pressure), in the brush settings ?That would be GREAT! Please, Adobe, can you

Hi, a lot of times i save masks and paths as a layer mask in the group of the object. So you can easy drop the folder into a compo and move your masks and paths along with it. And if you transform the folder the masks get scaled along. Also usefull to keep a sharp backup of your mask when the mask you use has a feather.It would be helpfull if a layer with no pixels (in the left icon) would have a different icon so you can easy identify it as a 'mask' layer with no visible pixels in the 'layer miniature' so to say.

Hello,Comme j'aime bien les scripts, enfin, les actions, j'en ai pas mal... Ce serait génial d'avoir un outil de recherche pour faire apparaitre, ou mettre en surbrillance, les actions trouvées.Déjà un outil de recherche par nom me semble le plus simple..je crois qu'after effect en a un efficace pour les effets, si je me souviens bien.. Je croise les doigts, Merci   

As a timelapse and landscape photographer, I need this feature so much!Birds suddendly appear in different parts of the frame & look like rubbish in the final video. I know some tricks in AE/Pr how to remove them fast with the Lighten blend mode by duplicating the same footage and moving it 1 frame forward, but it doesn't always work perfectly. It often gives artifacts. Being a perfectionist, I do it manually frame by frame in PS with the Spot Healing brush.Can you imagine how time consuming it is? 300-500+ images to clean... At sunrise the birds wake up and are very active. Almost the same thing with the sunsets. That's why I need the feature like birds removal. I'm sure it would be useful for many landscape photographers.  P.S. I can even provide a few timelapse series (hundreds of shots) to train your algorithms.  

Hey, I've been using Photoshop, Illustrator, Freehand, AfterEffects since their 1.0 versions, and there is something all of them always have been doing: when we change a text block aligment (left, right, or centered), the block 'jumps' to half-x-axis of whatever new setting we choose. I understand that must have been some limitation of legacy systems behavior (processing power, amount of resources, "it has always been like this"), but Figma and Sketch have showed us that such edit can be differently programmed. So, please: keep the text block in place when we change the text alignment - in PS, Illustrator, InDesign and AfterEffects.

Adobe Photoshop 1. Complex Task Simplification: Basic tasks like cropping an object require unnecessarily long steps. For example, to crop an object, I have to use the selection tool, press Ctrl+J, then delete the original layer. This process could be streamlined.2. Background Removal: The “Remove Background” feature works well with people but struggles with objects. Online tools like BGremover perform better. It would be great if Adobe’s tool could match this accuracy.3. Magic Fill: While Magic Fill works better in Firefly, in Photoshop, it’s quite poor and needs significant improvement.4. Dragging and Dropping Objects: Resizing objects to fit the frame when dragging and dropping is cumbersome. Using Shift+Drag is not intuitive. There should be a “Fit to Frame” or “Fill Frame” option with a single click.5. Drawing Tool: A freehand pen tool similar to the one in MS Paint would be a useful addition, allowing more intuitive drawing options.6. Prompt to Save Location: Photoshop shoul

I find the plethora of shortcut prefixes (combinations of Shift, Control, Opt and Cmd) too confusing to figure out. Because I don't want my chosen prefix to conflict with one chosen by Adobe, I wanted to pick one and be reasonably sure it would not get purturbed in an update. Based on searching through the unpurturbed defaults on my new install, I think "Control-Opt" is not in use. It'd be nice to know that Adobe promises to leave that prefix alone.

With almost all my files when i save up a version and go to the save as window, i'll have to select a point in the filname and scroll right to alter the version number, even though there is enough space for the save as filename window to be much longer.That way I can see the whole filename at once and directly select the number at the end.

이미 있는 기능 중 지우개 브러쉬와 그리기 브러쉬를 따로 설정하는 것도 좋습니다. 하지만 지우개를 따로 선택하지 않고 투명한 부분을 스포이드로 찍을 수 있었으면 좋겠습니다.

It would be great to be able to invert pressure input from wacom tablets for brush parameters. The most basic implementation would be an "invert" checkbox next to each parameter. A more powerful idea would be to have customizable pressure input curves for each parameter. This could be done with the "contour editor" used to control various layer style falloff options. In particular, I found that the pressure input for the Mixer brush's "mix" slider was the reverse of what I thought it should be, but the ability to customize the input curves for all parameters would create many new ways to use the brush tool. These curves could also be used to control exactly how much force on the pen is needed, allowing artists to work at a comfortable level of pressure and still enjoy the full range of input. This would greatly enhance the entire painting experience! Thanks!

It would be nice when creating guides you could create both horizontal and vertical guides all at once. It is very tedious to have to create every single guide needed for a graphic project. 

Hi There, Yes, the workaround is to modify the .jsx script but that's a workaround SO PLEASE DON'T POST THAT AND MARK AS THE SOLITION! Instead, can we just have a 'Use Layer Names' checkbox to disable the file name prefix option? I'm sure we can all agree this would be the better, more intuitive, built-in solution - right? Cheers, Ben 

Adobe please restore previous PS functionality! In previous versions of PS, users pull out a guide and it remains the color spec'd in preferences. Now, in 2024 PS, when the guides are adjusted, they turn blue. There's no way to disable this, or turn it another color. Blue is hard to see and this is very annoying. Adobe, please return this function to the way it was, or allow users to either disable it or adjust the color. PLEASE!I need your help fellow Photoshoppers, I'd love to see a lot of upvotes for this! Thank you!

We should have the ability to create custom frames to make pictures fit in other shapes (e.g., a polygon). I proposed that this idea be integrated into the lasso tools, marquee tools, shapes tools, and even the pen tool via a button that will convert the shape or section into a usable picture frame. This feature should also be available under the frame tool section for added convenience. The frame tool seems lacking, and there should have more functionality. Adding this feature will expand the use of the frame tool functionality for newer releases of Photoshop. I hope this idea will be useful to fellow Photoshop users as well. Let me know what you think about this idea. Thank you!

Hi, I'm a photographer who's unhappy with Adobe. It's bad enought that we're forced to use a subscription based software that seemingly has issues with every update that causes a loss of time in figuring out how to do the same thing I did before. Now Adobe is advertising "skip the photoshoot", and that AI is the "new digital camera". Have we reached a point where not even Adobe values photographers? I thought it would be budget minded clients that pushed me out of this industry, but increasingly, it seems to be tone deaf Adobe. Is anyone else tired of Adobe's hamster wheel?  https://petapixel.com/2024/05/03/adobe-throws-photographers-under-the-bus-again-skip-the-photoshoot/

When inserting a larger image that exceeds the canvas area, pressing Ctrl+T (for resizing) should have the default position set to the top-left corner (or remember the previous position).In the resize function, there should be an additional button to automatically scale the entire image to fit the canvas size, instead of just having rotate and flip options. This would be a much more useful feature than rotate and flip.The current resizing options are limiting. A "Fit to Canvas" feature would be much more practical and accessible for everyday use than rotate and flip.This function would streamline workflows and save time for users who frequently need to resize images. Many users, especially those working with large or multiple images, face this challenge. It would benefit a broad user base, not just a niche group.

With a big document it can take so long to find things nested within layer groups, often you need to scroll forever. I often have more than 500 layers in a document It would be great to be able to put in bookmarks which would also be acessable via shortcuts to jump around the layer panel. These could be added next to the layer search bar, see attachedFurther more dragging a layer or group over the bookmark at the top would place this layer just above (or below if alt is held) Further to this it would be great if we could split the view of the layer panel into 2 so if there is 2 sections of a document that need work you could keep each part visible. Obviously it would also be great to be able to drag layers between these sub panels if needed.

I work extensively with deeply-layered screen-resolution documents (ie. mock-ups). I like to keep my history -- or at least some of it -- of experiments as Layer Comps. But every now and again, these PSDs will get prohibitively heavy. So what I'm looking for is a command, or script, that will let me purge any layer which is not visible in ANY Layer Comp in the file. Does such a script exist?

Hi guys, I've been working with PS for more than 10 years and I found a few things that should be tackled in future versions. However there is one feature which I am really missing ever since. It would have saved me a lot of time, and (to me) it's so obvious: projects! I simply want to save my current status of photoshop, including my opened documents and their positions on the workspace. The reason simply is, that I am regularely working with more than just a few files at the same time. I am in the games and web business working with lots and lots of smaller assets. If I need to shut down my computer (which is actually required in my company over night) then I have to reload all my files manually on the next working day. I think this feature has to go into PS in one imaginable way or another after so many years. Even more as there are a number of other Adobe Tools (e.g. After Effects) which had that from the beginning. And PS isn't bound to one single field in graphics anymore - i

Two Suggestions:1) Be able to re-position Reference Image Gallery images toward the top and lock them down from randomly moving each time feature is selected. Makes them easier to find. Also label the reference images so that the process chosen can be documented for future reference.2) Allow the Content Type, Reference Images, and Effects to be applied to  an existing photograph and not having to use a prompt to apply the A.I. to a person's own photo.