FrameMaker

Adobe FrameMaker 2019 constantly crashes while we use the Object Properties pod.

I am having a similar problem with the text in the book that I formatted (2 books actually). I used Palatino Linotype. When I create the PDF and print "actual size" it comes out fine--whether or not I use crop marks. However, the printer (whom I have used for years) prints from the PDF and the font comes out about 3 percent larger than intended. It takes up too much space on the page and looks very amateurish. I've tried every way I can think of and even tracked down the maker of the printer that they use. He helped me create a PDF that he felt they could print, but it still did not print correctly. I use FrameMaker 12. I am going insane!

Does anyone else have problems with FM 2019? I am not using it as a HTML structure tool right now and I can just move my cursor and the whole program freezes. The text turns to bars across the page - I will attach images if I can. I just wonder if this is happening to anyone else and can it be resolved?

Hi,On many illustrations in my documents I have text frames with labels (explanations or numbers).This way the size of the illustration does not matter, but the text size does always fit to the regular text.My illustrations are in SVG.However, when I convert to HTML5, it seems that I only have these options (Publish Settings, Optimization tab, Convert SVG to raster image):Option deactivated. Convert only SVG and ignore all labels. Bad. In the HTML5 I see only the SVG part (crisp and clear); my labels are gone.Option activated. All SVG is converted to JPG, even those illustrations without any text frames. When there are additional FrameMaker objects on the illustrations, these are merged with the SVG file. The quality is worse, but I can read text.Best would be, if FrameMaker would use the SVG files, if there aren’t any additional elements.If there are additional elements (text frames, circles, arrows, etc.), then FrameMaker should add this to the SVG file.When I would add the FrameMake

I am creating an application for a large customer who needs better control over the bookmarks in their PDF output. So far, I have been able to generate PDF bookmarks from special paragraph tags. The problem is that the bookmarks do not always reflect the exact text of the titles that they point to. Also, the titles are not always given the same paragraph tag, depending on a lot of formatting rules that need to be applied.As all of this is round tripping to XML, I have created XSLT to create fm_bookmark elements which contain the desired bookmark text and pick up a paragraph tag that makes them show up in the contents tab of the PDF at the right level. The paragraph tags "bookmark_level_1" etc. are made invisible by setting them to white font color and tiny (2pt is the minimum) font. The remaining problem is that it is a paragraph, even though it is invisible for the human reader. This means that spacing above and below the paragraph kicks in and offset the actual title from the top of

I have two machine, FM 2017 in 1st machine and FM 12 in 2nd machine. In 1st machine, on FM 2017 files i have imported images as a references. Later when I am trying to open the same files in 2nd machine (Note: Before opening them in 2nd machine, i have saved the FM files from FM 2017 files to MIF 7) not able to load the images.Any solution..?Adobe FrameMaker​

Setting up a certification document, where we want to manage the response to each question as a separate .fm file. 69 questions so far, 40 or so to go … and I can no longer access the bottom of the book panel: scrolling down gets me as far as item 68 and that's it.Given the content (I sha'n't say "structure", because I'm not using structured FM), would it be any help to use folders? I have no idea what these are for :-}I'll mention we're still on FM12, in case that's significant. Thanks in advance for hints and tips.

HiWhen creating a PDF in FrameMaker 2019 I constantly get the following error with no PDF produced:Error: undefined; OffendingCommand: pdfmark; ErrorInfo: _objdef A214040.1I have updated FrameMaker 2019 and Acrobat DC. I have tried- printing to file- publishing through the publish portal- saving as PDFAll with the same result

I need to use the Find/Change dialog to search for special characters (like the Greek symbol for Omega).  I can copy the character from the body of my document and paste it into the Find window, but in this case it pastes the letter W.  While this does find the Omegas accurately, it also finds any word with the letter W in it.How can I search for special characters using the Find/Change dialog?Thanks!

I have 1990's vintage Framemaker documents but I don't have Framemaker. Is there any conversion software available to turn them into Acrobat documents?

Hi thereI want to change a variable in several files in a book. I'm using the following snippet:<MIFFile 7.00> # Generated by FrameMaker 7.0p578<VariableFormats<VariableFormat<VariableName `NombreGuia'><VariableDef `Guía de administración'>> # end of VariableFormat> # end of VariableFormats# End of MIFFileThe problem comes when I import it, FM changes the characters "í" and "ó" with "Í" and "Ù". Is there any workaround for this? any chance of use some scaped characters o ASCII code in a snippet?Thanks a lot for your time

Hi,I had tested the export to HTML5 only briefly yet. When I use the default export settings (and some tweaks), the export looks good in my browser and on my smartphone.One thing does not work. When there are several paragraphs in a table title, all paragraphs are concatenated and do not have any font information. Which means Times or something like this.With a single paragraph everything is fine.Is there anything which I can do about this? What can I do that the export maintains the separate paragraphs?Possibly I will have more questions in the next days.Best regardsWinfried

Experimenting with XML and DITA to see if it work for my company.We make unstructured parts manuals in framemaker in a book format that contains a series of parts page documents within the book.This content must be made available in an XML format with a lot of additional information that we don't require for normal parts manual production -- the xml version must contain fields for remarks, serial numbers, etc.Right now this requires that the information be reentered in the xml format, filling in fields we have information for.Was trying to see if books from here on out could be produced in a structured format that could be exported from framemaker to xml.To test this, I made chapters in xml, and I can save these individually in xml.And I can export the book file in xml. This produces an xml file referencing the xml chapter titles.But in order for it to work I'd need the ability to export as one file of the entire book with all the xml in the individual chapters included in that file.Is

Is there a technique when building an EDD that allows you to add an element to a structure that takes up no space on the page?basically, want an element to be included in an xml document as an empty tag set, like: <part></part>. However, do not want this element taking up any space on the framemaker page. Right now it takes up a line of text.Is there anyway in the edd, perhaps as a general rule, to make this element so that it takes up no space on the framemaker page? Tried different combinations, but wasn't having any luck.

The document I'm editing contains a large number of icon images, and two of them are causing the document load to throw an error like "insufficient memory to import file w_icon_redo.png". The document loads and can be edited, but the two elements which import the two problem icons have simply been dropped.The problem must be related to the PNG files, because no matter how I shuffle the document around the same two files cause the errors. If I create a document which just contains a couple of words and one of the problem icons, I get the same error.However I can see nothing odd about the two PNG files which won't load. For example "redo" gives the error and "undo" is imported fine:identify -verbose w_icon_redo.png > redo.ididentify -verbose w_icon_undo.png > undo.iddiff redo.id undo.id1c1< Image: w_icon_redo.png> Image: w_icon_undo.png91c91< signature: ba39......> signature: 1670......93c93< filename: w_icon_redo.png> filename: w_icon_undo.pngI'm not sure where e

HiIf I have a ditamap with five concepts and I nest those in ditamap, for exampleTitle     Title     Title     Title     TitleAnd when I save ditamap as book with fm components my book is as below1. Title     1.1 Title     1.2 Title     1.3 Title     1.4 TitleBUT, when I have concept, task and reference, and my ditamap is as belowTitle     Title     TitleAnd when I save ditamap as book with fm components my book is as below1. Title1. Title1. TitleWhat could be the problem? I have 2019 version.Br,Pekka

I'm putting in a small table in my document. I want to wrap the text around it. Is it possible and how do I do it?

Hi All, Something that I messed with in the HTML options in FrameMaker 2015 is causing there to be no hyperlinks in the output. It was working, not it's not. How can I reset this to it's defaults? Thanks!

Has anyone had an issue with importing graphics into a table cell in version 2019? We have done this for years and now graphics are scaled to a ridiculously small percentage. The graphics can be scaled back to 100% and the anchored frame can then be resized but this appears to be a bug.

I have my figure numbering set up in a 2,000+ page document (welcome to government life) and have never had issues.  Recently, I had to convert the files to the newer version of FM.  As I was making changes and updates to the document (not styles), I realized that my Figures proceeded as follows: 2-147, 2-148, 2-139, 2-140..they continue correctly from that point on, but for the life of me, I cannot figure out why the figure number jumped back by 9! There are duplicates of figure numbers.  Any help appreciated!

We use the following paragraph auto-numbering format:C:<$chapnum>.<n>.<n+>< =0 >< >< >\t  It works as expected.For our purposes, we have multiple sub-chapters in a document.For instance.Chapter 1.1Chapter 1.2Chapter 1.3The Auto-numbering from our paragraph format would be:1.1.11.1.21.1.3What I would like to do is to add another auto-number sequence after this, it would look like this:1.1.1 XY11.1.2 XY2Then it should continue in Chapter 1.2 like this1.2.1 XY3Basically I want to hard code "XY" in the paragraph format and increment the numerical digit after "XY" and have it increment across multiple chapters (1.1/1.2/1.3) sequentially.The format would be: C:<$chapnum>.<n>.<n+>< =0 >< >< >\t  XY (?).  I don't know if this is possible, but what auto-numbering element would allow me to increment the digit after "XY" (signified by the question mark in my example).

Hi All,I am pitching to write a bilingual manual (English + Hindi) and would like to use Framemaker. The sample pdf of an earlier job shows that the English and Hindi pages are located back to back and their page numbers are identical. I believe that the sample is made in MS Word, which I would like to avoid in favour of Framemaker. Does Framemaker have a method by which subsequent pages will have the same numbers? Instead of using the page number variable, can we have even pages follow a certain number series and the odd pages follow a different number series?Regards Apurva

Is there any way to make the icons in the menu bars larger--they're about 1 pt in size and I really have to strain to discern which is which. I've already tried re-installing FM and also Edit/Preferences/Interface.Thanks,HelpAngel

I am updating a book with 15 files from Frame 5.0 to 2019 and have gotten all but 3 files transferred/migrated over.  After opening up my old files with FM 2019, I saved each one as a MIF file and then re-saved as .fm (2019) file. I then deleted the original files from the directory. I updated the file names in the book to reflect their new .fm end. I opened all 15 files and "resolved" unresolved cross references. In each file I had a several unavailable fonts that I mapped to available fonts via the font pod. I saved each file and the closed all the files and the book.When I open all the files 3 files still give a message about unavailable fonts and 1 file also says unresolved cross references. The Cross-reference pod shows several files have unresolved cross references and on these files I use "Edit => Update References" to them. I save the files and thenclose the files. Upon reopening the files I get the same messages. I've repeated this many times with the same result (thi

I am using framemaker 7.0. I am trying to create a pdf  in acrobat 7.0 that is 11x17. I cannot create any pdf that is larger than 8.5x11. If I select Print to microsoft pdf I get pages are larger than the printer paper. If I try to save as in adobe pdf in framemaker i get "Framemaker could not find adobe PDF printer instance, which must be installed to execute save as command. If I try to open the framemaker file in acrobat I get the message cannot open the file because it is not a supported file type or because it was damaged.HELP PLEASE!!!!!!!!!!!!!!!!!!!!!!