FrameMaker

I'm attempting to update my book and save as PDFs.When attempting to Update a book or "Save as PDF" I get the error messages below:When Saving as PDF:When Updating Book:I get an error report, but also the windows prompt error, and FM randomly creates separate TOC/LOF/LOT files unstructured.  This just started happening, I have no idea what causes this.  I've tried updating Framemaker, restarting, and googling this issue, but no information is found. I am working with Adobe Framemaker 2015, version 13.0.5.547. If anyone is familiar with this issue, help would be greatly appreciated as this prevents me from getting any work done.  Thank you!

I am using FM2019, can someone tell me how to use Cross-References so they would work in DITA Topics and DITA Map.As we know that normal FM cross-references do not work in DITA.I have two topic files, each file has one cross-reference which points to an image (inside Figure element).DITA MAP (of two Topic Files) output in PDF: Figures are updated but cross-references are not updated and not working. 1

I am unable to either print a FrameMaker 2017 book or save as PDF. Can I get some help? URGENT!

Hi,* My Alert preferences show all messages* This is a standalone file (not in a Book)* My Reference Page defines my Heading1MTOC and Heading2MTOC the same (tab stop setting of 4.7R):<image001.png>    But in the Body View, even after clicking Update MiniTOC, it doesn’t display correctly:        The MiniTOC displays correctly when I slightly move the right-justified tab stop any amount in either direction. (I thought there was an extra tab character, but there isn't; I also experimented with adding 1 more tab stop closer to the left):    <image003.png>    But when I click the Save button, that tab stop change is lost and the MiniTOC reverts to the earlier screenshot. Please let me know if you have any ideas what I’m doing wrong or what I need to adjust to make my MiniTOC display properly. Thanks,GuyP.S.  I now have a 2nd file with the same issue, and in the MiniTOC, the tab symbols appear to the

I have Framemaker 15, which was working fine so long. I run it via VMWare.When I do a File-Save as PDF and give a file name and click ok, it seems that it is creating a pdf file but then I cant find it anywhere. I dont get any error while creating it.In the File explorer I do see that file in the Recent files list. When I try to open it, I get an error that the file does not exist.Its weird. But has anyone come across such an error?

Hi! I noticed a new section in the ini file from the last time I updated FM 2019. I would love to use it to include a revision history page in my generated books. Is there any guidance on how to do so?Thanks!For reference:[BookWithFM-FrontMatter]Template=RevisionHistoryTpl.fm < - I ADDED THIS TEMPLATE FILEChapterNumbering=Restart;ChapterNumberingFirst=Restart|Continue|ReadFromFile|UseSameChapterNumberingValue=1ChapterNumberingText=ChapterNumberingFormat=Numeric;ChapterNumberingFormat=Numeric|Roman_UC|Roman_LC|Alpha_UC|Alpha_LC|Kanji|Zenkaku|Zenkaku_UC|Zenkaku_LC|Kanji_Kazu|Daiji|Text|FullWidth|FullWidth_UC|FullWidth_LC|Chinese_NumericPageNumbering=Continue;PageNumbering=Restart|Continue|ReadFromFilePageNumberingValue=1PageNumberingFormat=Numeric;PageNumberingFormat=Numeric|Roman_UC|Roman_LC|Alpha_UC|Alpha_LC|Kanji|Zenkaku|Zenkaku_UC|Zenkaku_LC|Kanji_Kazu|Daiji|FullWidth|FullWidth_UC|FullWidth_LC|Chinese_NumericPagination=SingleSided;Pagination=DoubleSided|SingleSided PageRounding=De

Do I get any upgrades if I buy Framemaker 2019 for $999?

HiI was checking my answer to another question in this forum about table properties when I discovered that my recollection of how certain properties worked was faulty. This has revealed an omission in our EDD which I'd like to rectify, but the reference guide hasn't got enough detail to help me.Our table schema allows for cell align and valign attributes to be specified at any level (th, tb, tf, tr, td) and inherited by descendant elements. Thus the text alignment of a table cell will be governed by the cell's align attribute/property, if that is omitted then it will use the row's align property, if that is omitted it will use the th/tb/tf align property, and so forth.The reference guide notes that the align and valign attributes are automatically translated by Framemaker without needing to be specified in read/write rules, but it also notes that when tables are displayed in the document view the cells are not aligned automatically; "you must write format rules to use these attributes

How do I modify NoName to make is WDMS_1261728_003?It will not allow me to edit From the Structure View --Can I modify it From the Elements Tab..?

Is there a source document for the list of FrameMaker structured elements?   fm.mov   fm.icy  fm.description (attachStoreShipPartCodeRef)  etc.  Most are self-explanatory, but I like to understand the context in which they are used, which data modules, etc.  Is there a source document somewhere?

I have been trying to use Save-as PDF from the File menu in FrameMaker 2019 but the File\Publish settings seem to be overriding the folder selection I make in Save-as PDF. My PDF are being saved to a different folder that I set up during Save-as. I am creating PDFs for a number of different .book files want each one saved into the folder that contains the l.fm and .book file.  I never had this issue with Previous version of FrameMaker.Is this a BUG or been reported by anyone else?

I have FrameMaker 11 and need to upgrade to FM 15.  The download page is asking for a serial number which is available from my account but I have long since forgotten my password and no longer use the associated email address.  How can I get the SN so I can purchase an upgrade?

Hello everyone!Please help me understand what I need to do if I want ... tables of the same type in my XML document keep different column widths.1) I use FM 2017 and have a book with XML files, so I use a DTD and EDD files to design my document.2) I added to  EDD a new type of table and updated DTD. 3) As a result, I can add this new table in a document, but I cannot save widths of columns. If I close the document and reopen it, the widths of columns have default settings which I set in structure template for Table format. I cannot predict what column widths I will need for future tables, so I would like to be able to adjust the width of the columns for each individual table and save these settings after closing the document. How can I do it? Is it possible?

Using FrameMaker 2017Step 1.  From FILE->NEW->BOOKStep 2. Using the STRUCTURE pulldown menu, validate the .bookError: Element ValidationElement: NoName is undefined.From the Structural Development Ref pg 178/262  I have to add RootElement as highest element.Modified the Element Definitions Document to create a RootElement as highest element.Now it tells me I need to edit the "Conversion Table"?What is the easiest solution to this?

Hello,I'm pretty sure that my question is related to Master pages. I'm trying to set things up so that my back cover appears on the right page and a blank page appears on the left. Currently, I'b getting the opposite, my back cover on the left side and followed by a blank page on the right side.I've been playing with master page usage and also tried creating a Custom Master page but so far, nothing changes my layout. Thank you in advance.

How can I 1 A4 print on more pages?

Which platform would you prefer for writing technical documentation? Windows, MacOS, or Linux?Let us know and make your vote in this poll on Twitter:https://twitter.com/AdobeTCS/status/1085878070068813825Not on Twitter? Let us know your thoughts in the comments below.

My team just updated to FM 2019 Version 15 and now the "Symbols" button in the toolbar does not work for any of us. It is grayed out. The pull-down from "Insert" works, but we want the button to be functional to insert symbols. How do we turn this on?

Hi,I am trying to copy and paste from one FrameMaker file to another, but when I do, the resulting text is blue (it's black in the source document). When I try to apply a style to it, it remains blue.Any ideas on what is causing this to happen?

Some time ago, I managed to arrange things so that when I print to Acrobat from FrameMaker, the resulting PDF gets created with the Navigation Tab defaulting to "Bookmarks Panel and Page" on the Initial View Tab of the document properties. I love this. It saves me the time of going to the file properties and changing the Initial View setting each and every time.My problem is that now I can't remember or figure out how I did it. Here are some things I can tell you (all of which lead me to believe that it's a setting somewhere in the specific FM file(s)):When I set it up, I was using FM 12 and Acrobat (XI maybe?) on a different computer from the one I am using now. I am now using FM(2015 edition) and Acrobat DC.It only works when printing from FM (not from Word or any other program).It works when printing book files and individual files.It seems to only work with my existing files. If  I create a new file "from scratch" it doesn't work (I almost always create new files either by sav

I am using FM 2017 and have found that when I print documents containing graphics, the print time is sometimes unusually long.  Most of our graphics are referenced PDFs, and none are particularly large (i.e.. most are under 1MB). Currently I am trying to print (to PDF) 6 pages of a manual section, containing about 5 graphics, each of which are under 100KB.   The print job has been running for about 30 minutes. Is there an adjustment or update that would address this?

Are there any good, readily available (free to use/download) resources for creating EDDs specifically and Structured templates generally? I'm looking for something much more in-depth than the "Create an EDD" topic in the Help files, but the Structure Application Developer Reference doc focuses more on the application development side and doesn't seem to go into much detail on EDDs. For example, in trying to set up general rules, I can't find information on what wildcards are available, their format or use, how parentheses are used to group items, etc. I also don't see much on how to set up formatting rules.Thanks!JMW

Hi thereA very wierd issue about conditional text.I have this example text: three paragraphs and the second one with very big font size and marked as conditional text.I hide the condicional text and FM 2019 inserts a conditional marker with the size of the previous paragraph!!.As you can see, there is a lot of room among the three paragraphs.Is there a workaround for this?Thnaks a lot for your time

../ExtendScript Toolkit.exe" -run exampleScript.jsxDoes anybody know how can I disable this ? or is there any good way to run the extendscript in non interactive mode.

Does anybody know how to update ?