Lightroom Classic

Hi!I'd really appreciate your advise!Lightroom Classic (14.5.1)  keeps crashing every 1-3-5-10(max) minutes. Or it just freezes and i have to end the task. (Creative cloud desktop says - works on this device). Windows 11, latest update. Installed 2 days back vinstead of 10, that's when the crashes started (installed on formated hard disk) What has been already done:- reinstalled lightroom-reset preferences- switched off gpu in preferences- updated driver for gpu- created 3 new catalogs (latest one has just one folder for test purposes, catalogs are on internal drive; they were optimized etc) Adobe compatibilty says that system is fine, after it does check after crash. I spent 3+ hours with support agents today, they did the same mentioned above, couldn't find a better solution or agreed escalate the issue (i got really sad, when the solution offered was that my last catalogue with just one folder might be too much. Seriously?). Tickets numbers: Your A

Hello. I know - I'm a novice and it's probably a basic question. I'm trying to take a digital picture and print it into 16x20 but the image becomes super grainy. How can I improve the resolution so that I can print it and it's not so grainy?

I was recently on a walking holiday in Tuscany, Italy. I took a lot of photos. I have an app, Geotag2 Pro, installed on my iPhone which logs times and GPS locations. When I got home I loaded the photos into Lightroom Classic (14.5.1 on macOS) and told Lightroom to apply the tracklog. To be fair the results were all in Tuscany, but all over the place. Photos taken a couple of minutes apart were miles apart on the map.I contacted GeoTag support for advice and they told me to download their tagging app which I did and used on copies of my Tuscany photos. I then  created a separate Lightroom Catalog with just those copies. The results were much, much better; there were a few anomolies but they could be explained by the way the Geotag 2 Pro works and if their logging app can't place a photo in a reasonable place in the time line, it doesn't do anything to it.Has anyone else experienced this problem, or have any ideas for improving the situation? The Geotag logging app seems to work bet

I have the current version of everything.  When flipping between images, Lightroom pauses for anywhere between 3 & 8 seconds.  It's frustrating as I am a professional who is editing thousands of images.  Adobe!  Please let me know what to do?  It did this in previous versions as well.

I used Classic instead of the cloud version for the following reason: I have read that Adobe retains the right to mine private images uploaded to their cloud for use by their AI tools and possibly other purposes.  Since Apple already has all of my personal images on THEIR cloud, i don't see a need to extend access to yet another tech company.     I expected Lightroom to have a usable facial recognition function, but it DOES NOT.   I've spend 12-18 hours manually retagging a few thousand images of family in Lightroom Classic.  The initial tagging was incorrect most of the time.  Dogs and pieces of furniture "recognized" as specific people, old people recognized as young, men as women, the same IMAGE showing up in different groups.  So, in the end, i had to classify or reclassify most of the images, and finally gave up when i got about 60% of them done.  I think in the future I may upload them to my iPhone cloud and let the iPhone do the image

In my workflow, I import into Media/Photo/CameraImport/2025/2025-07-15/filename.arw. Then I develop and rate there, and when I'm done with an event, I select all the ratings >= 1 and Export them as HDR jpgs (or whatever is needed). What I'd like is for the exports to go in Media/Photo/Exports/2025/2025-07-15/filename-HDR.jpg, i.e. /Media/Photo/Exports/<original folder>/<original filename>-HDR.jpg, and have those files not be part of the Lightroom catalog. (If I use "original folder" then later I sync the folder to pick up new imports, it'll also pick up the Exports into the catalog, which would be bad.)Is this possible? I haven't found any way to apply template tokens to the export folder, just the filename. I suppose I could export to one giant folder with everything, /Media/Photo/Exports/2025-07-15-filename-HDR.jpg (filename tokens make that work OK), but that gets hard to manage.What do folks here do? There's probably a better way. Maybe a plugin like h

Hi,My Lightroom Classic has been behaving reasonably well until today. Now I can't import photos - at all.When I select File/Import Photos and Video it just does nothing at all. No splash screen, no dialogue box... nothing. Here's what I've tried before I came to you guys:1. I restarted the computer2. I created a new Catalog with no photos from scratch... I did at least get this error when I did this: So at least there was that.I then went into the library folder and checked all permissions for all operators on this machine... IE me! - and I checked they were all set to read/write.I restarted again and - just nothing.I can't drag images into the thumbnail grid view from Finder.... and I can't.... well do anything else!Everything else currently seems to work ok. No new photos in my catalog... or any catalog for me! 

For some reason, I no longer get the option "delete from disk" when I hit Ctrl-backspace to delete by rejected photos. All I get is the "remove" option. This is true when I am working in collections but not in folders. In folders I do get the "delete from disk" option. Does this mean I have to work in folders to delete the photos? I'd prefer not to. I prefer to work in collections. If I have to go to the folder, it means I have to figure out what folder the photo is in and go there. That's such a pain. But I will if I have to, I guess. Is there a way to get the option "delete from disk" to appear when I am in collections? I could swear this option was available. Maybe they took it away in an update. Thanks for the information.I do have the latest update for Lightroom Classic.

I'm just trying to find out as to whether I should use "Raw Details" which now – since the newest release – is available in the Menu "Details". The general Information about this function provided by Adobe doesn't give me enough guidance as it is too general (bigger sizes). I can't find any related info in this forum yet.I would like to understand from which sizes of pictures (pixel, dpi), monitor and publishing items (i.e. TV-Screens, printed items) it is essential to use RAW Details.My pics have usually 6000x4000 pixels, are imported into LrC as dng-files and exported from LrC as TIFF-files with 360 dpi. I'm using a 28" monitor. From time to time some (very few) pictures are printed on bigger formats, such as 90 x 60 cm or also bigger. Also I show a selection of my picture on TV-Screens to fan/friends and family.Is there any advice as to whether I should use "Raw Details" anyway or – maybe – only in certain circumstances, e.g. when extracting details of a pic or for specific the

When I try to edit photos on my laptop (Dell 73900, Windows 11, Intel UHD graphics) the Develop module will not use the entire available window to edit photos.  The photo appears in the upper left corner of the window, and the Lightroom app appears to "overfill" the screen (see attached doc) Any suggestions?

I want to show the string "B & W" as a title.If I put "B & W" into my TranslatedStrings, I getWindows: "B  W"Mac: "B & W"If I put "B && W" into my TranslatedStrings, I getWindows: "B & W"Mac: "B && W"If I use the unicode for ampersand nothing changes. Do I have to use different zStrings for different Platforms? Or should I wrap the LOC function with custom code and always put "&&" into my TranslatedStrings?

This may sound a bit crazyI have a large lightroom catalog on my internal hdd drive in my tower. I also have a med catalog on an external sdd. Can I download and install a second Lighroom Classic program to my SSD catalog with out interfering with my catalog on my computer. Eventually I will move the second large catalog to the external SDD and merge the two catalogues. Want to make sure the SDD catalog is working good first.

When I begin to process a folder of images in Lightroom, I first save the folder to my desktop. I then edit in Lighroom, and the edits are saved to the catalogue on the internal hard drive. Once I have completed the processing, I save the image folder to two external hard drives, and also save a copy of the catalogue to the external hard drives (note that I have never needed to use the backup catalogue). I then delete the folder on the desktop. Sometime later I may revisit the images to do further processing. I have realised that sometimes I plug the external hard drives into the D drive, and sometimes the E drive of my computer,  and wonder whether this matters - can Lightroom still find the images if the drive letter is different? Would it be better to have one drive dedicated to processing, and the other drive be purely for backup? Should I stop editing images on the desktop?

I have an extensive keyword lsit, with heierarchy.  In an older version of LightRoom Clasic, there was a command that would export this list to a text file -- it worked.  How do I do this in LR 14.5.1?  The LR Classic Help section goes directly to Adobe Bridge.

Freshly installed Lightroom classic. Noise removla leaves such a terrible stains on pictures. Any idea how to fix that or at least what is wrong?  

I'm looking for a solution to batch processing images where I can add white bordering and my signature/watermark inside the bordering, like shown below;Probably hard to see on this forum due to the white background, but the signature is sitting in a white border frame.Thus far I have done this process by taking the image to PS (if not already in PS) and then increasing Canvas size and dragging my PNG water mark inside and resizing and positioning it (ZZzzzz....)It's ok when doing it for a shot here or there, but I also do event work (paid and non paid), the non paid stuff I tend to always watermark like this, but if there are 20, 40, 100 shots like this... that means popping into PS for each and every shot (for this process) whereas it's quite feasible I edited things purely in LR (and used Syncing features) to be quick about things, popping into PS for this process for each and every shot kinda defeats the purpose. There has to be a quick way to handling this, even outside of LR/PS?Th

Al usar Luminar AI me ha desaparecido el plugin de Topaz en Lightroom classic. Creo que es un problema de Lightroom, no me deja usar el plugin de Topaz que en teoría no se instala, sino que teniendo el programa, ya se instala como plugin directamente.Necesito que me ayuden.Gracias.

Bonjour Savez-vous comment déplacer des photos d'un catalogue à un autre sans déplacer les photos ?   Merci   [since writing about catalogs, it seems to be Lightroom classic - moved to the correct community - Mod.]

What is the best way to use LRC on 2 computers/Macs ? Thank you for advising me.

I have some vintage photos (taken at least 100 years ago) that I've carefully tagged using facial recognition in Lightroom Classic CC. I'd like to share these photos with each photo tag preserved above each face with family and genealogical societies. In some cases, I have class or sports team photos, and identification of the individuals in the photo holds a great deal of value for the people I'm sharing the photos with. Is there any way of exporting people tags with associated faces to the web?

In the past (2 month and earlier - I used LR from more than 10 years) When I am on the map module, if I click on one picture, Lightroom suggest datas for land, town. and state.Now (ver 14.5.1) I have no suggest.I haven't change nothing in the parameters.What can I do ?Thanks

I have a message of and error of the modules when I open any catalog, Many technicians of Adobe had try to solve the problem by delete and reinstall the software and nothing is working, only when one of them install the version 13. All my recent work is on the new version so I can't use my catalogs.

Looks like I finally have to leave Adobe Photoshop Lightroom 5 running on Mac Mojave and go ahead with a perpetual monthly subscription to Lightroom Classic (Dropbox just quit supporting Mojave):1. Am I correct in that this would be the app that replaces the editing and organizing features of Lightroom 5 with its catalog method?2. Can I store the photos and catalogs on a hard drive or on Dropbox? (Or do I have to use Adobe's web server.)3. Will my Lightroom 5 catalogs transfer over? Note: I'll probably not transfer over everything  but start new catalogs in Lightroom Classic. However, eventually I'll want to update the platform for the old photos.Thanks

I’ve been using Lightroom since version 1.0, and I’ve never had to fight this hard just to get my files into the app. This issue has persisted for months and is now actively disrupting client work.Setup DetailsCamera: Nikon Z8 (RAW only)macOS: Sequoia 15.6.1Lightroom Classic: 14.5.1Import Method: “Copy” via USB-C direct from cameraSecurity Settings: Full Disk Access enabledGPU Acceleration: Disabled❌ The Problem Lightroom crashes instantly when I attempt to import images directly from the Z8. The crash occurs before I can even select files. The camera doesn’t mount properly in Finder, and I have to physically disconnect the cable to eject it. Once I manually transfer the RAW files to my drive, Lightroom handles them perfectly. So the issue is clearly tied to the import handshake—not the files themselves.Troubleshooting I’ve Already TriedDisabled GPU accelerationReset Lightroom preferencesCreated a new catalogTried importing with minimal previewsVerified camera firmware and macOS

Les transitions c'est toujours pas çà... Quand je selectionne un ciel dans un paysage, je dois souvent soustraire la végétation (arbres) et là ça se gate. J'ai un liseré blanc autour de la cime des arbres difficile à sélectionner. Si je pousse un peu à gauche le curseur des hautes lumière ou de la correction du voile, çà donne un effet pas très joli sur ce liseré. Avez vous trouvé une solution à ce problème ?merci d'avance de vos réponses  Transitions are still not that... When I select a sky in a landscape, I often have to subtract the vegetation (trees) and then it gets bad. I have a white border around the treetops that is difficult to select. If I push the highlight or haze correction slider a little to the left, it gives a not very pretty effect on this border. Have you found a solution to this problem?thank you in advance for your answers