Lightroom ecosystem (Cloud-based)

In Lightroom once you apply AI denoise to an image, the program becomes nearly unresponsive so editing is impossible.  For that reason I always have to apply AI denoise last, and I do it in a batch.  However, if I should want to go back and edit my images further, I now have to remove AI denoise from each one individually in order to edit them without Lightroom hanging constantly and taking ~20 seconds to apply any changes I make.  Please make it possible to remove AI denoise from multiple images at once so that they can be edited.  At the moment if I try and copy the Detail category from an image with no AI denoise applied and then paste to other images, it does not remove denoise.

no option to add photos images..

I want to edit in Topaz, so I click on Edit In and select Topaz. Topaz begins to load, but stalls after about an eighth of an inch of progress. 

Title: GPS metadata is lost when exporting multiple photos to Apple Photos on iOSProduct: Adobe Lightroom Mobile for iOSDevice: iPhone 15iOS version: iOS 26.6.1Lightroom version: latest available version as of September 2026Problem descriptionWhen exporting multiple photos from Lightroom Mobile to Apple Photos using Save Copy to Device, GPS/location metadata is not included in the exported JPEG files, even though:the original RAW files contain valid GPS/location data, the location is correctly displayed inside Lightroom, “Include Metadata” is enabled, “Location Info” is enabled in the export settings.The issue occurs specifically with batch/multiple-photo export.When I export the same photos individually using Save Copy to Device, the GPS coordinates are correctly retained and appear in Apple Photos.Steps to reproduceOpen Lightroom Mobile on iPhone. Select two or more RAW photos that contain valid GPS/location information. Verify that their locations are visible inside Lightroom. Selec

devo sempre riavviare lightroom se scelgo di modificare in firefly

Bonjour, je traite de la retouche de photos, l’application rame et se bloque de manière intempestive sur IMAC. Je suis obligée de quitter l’appli entre chaque traitement de photos. Avez vous le même problème s’il vous plait 

Key word search in relevance order gives the most relevant hits last.How to reproduce:1) Search for any known key word added in Light Room Classic.2) Choose search order "Relevance". Expected result: The most relevant search hits (images with the specified key word) should be first.Actual result: The least relevant search hits come first (even totally irrelevant images). There is no option to reverse the order.

Tengo una suscripción activa de Lightroom Premium de 100 GB comprada mediante la App Store de Apple, con renovación el 24 de septiembre.Después de cambiar de iPhone, Lightroom dejó de reconocer la suscripción Premium. He comprobado que la suscripción sigue activa en Apple. He probado “Restaurar compras”, reiniciar el iPhone y entrar tanto con mi cuenta habitual de Adobe como mediante “Continuar con Apple”.En ambos casos Lightroom indica “No hay compras restauradas” y las funciones Premium siguen bloqueadas. Adobe tampoco detecta un plan activo asociado a ninguna de las dos cuentas.Necesito ayuda para volver a vincular mi suscripción activa de App Store con Lightroom.

I’ve trouble shot so many things to try to fix it, but after this latest update, it’s not allowing me to import new photos

como hacer copia de seguridad del catálogo?

Hemos detectado un problema con sus resultados, consulte nuestras pautas e inténtelo más tarde.. al querer usar la herramienta de quitar mediante IA en una sesión de embarazo. 

In LR Mobile I used to be able to show full-screen images with Title and Caption overlays (or exif overlays).  The Title and Caption option seems to have disappeared.  Am I missing something?  (For my purposes, without the Title and Caption in an overlay or in a simple uncluttered header/footer, LR Mobile is effectively useless.)

@Sameer K I did the same steps, deleted the library file, uninstalled and reintalled the app, and it’s still the same. Is there any way I can get help on this? I gave the permissions for full disk manually even if the Lightroom (cloud version on Mac) didn’t ask for it. 

Assisted Culling is now generally available in Lightroom  TL; DR: Assisted Culling has graduated from Early Access to General Availability. It gives you a fast, reviewable first pass on large shoots: it surfaces your strongest frames and sets aside the obvious rejects, so you spend less time comparing near-duplicates. You stay in control: review everything, adjust the thresholds, and override any call. If you tried it back in October 2025, it's substantially more accurate now, especially for wedding, event, group, and portrait work. We'd love for you to give it another look and tell us what you think in this thread. What it does Open an album or collection, run a cull, and Assisted Culling analyzes your images against the criteria you choose: Subject Sharpness, Eye Sharpness, Eyes Open, exposure, and more. It marks Selects and Rejects, shows you why behind every call, and leaves the final decision to you.  How far it's come since Early Access  February 2026: Expanded from individual po

Like to editing controls on left side 

I have an external hard drive with an old backup of “originals” that I had to move to a new computer with a fresh install of Lightroom. I configured lightroom to point to this new drive and it seems to do fine at first. Task Manager shows a steady 90-100 Mbps download rate and Lightroom shows the sync item going steadily decreasing. But this only lasts for about 5 minutes and then the download, disk usage, and CPU usage all run down to nearly 0. Pause and unpause sync does nothing. If I restart the program, it starts downloading steadily again, but only for about 5 minutes. I ended up vibe-coding a python script that starts Lightroom, monitors for a drop in network traffic, and then restarts Lightroom in a loop. This seems to be working well (I’m finally able to leave my computer unattended for a long time and know that it’s continuing to download). However, this points to an underlying problem that perhaps the dev team should investigate. Note, my script has a timer, and is reporting 

Fotoğrafı toplulukta düzenledikten sonra paylaşamıyorum düzenlediğim fotoğrafı insanların görmesini istiyorum lütfen yardım edin 

Lightroom Mobile for iOS v11.5.1 is stuck on “Importing – 1 pending” whenever I try to open/import any photo from the Device tab.This started recently. Previously, I could open photos from my iPhone and edit them normally without any delay.The issue happens with every photo I try. The import remains pending and the photo does not open for editing.I have already tried:- Restarting the iPhone- Signing out and back into my Adobe account- Offloading and reinstalling Lightroom- Testing different photos- Checking Lightroom Web for sync issues- Confirming I have plenty of Adobe Cloud storage available- Testing my internet connection (around 86 Mbps)The problem still persists.Device: iPhoneLightroom version: 11.5.1 (7C3095/251)Please advise if this is a known issue or if there is a way to reset the stuck import/sync queue.

Hello Adobe Support Team,I’m experiencing an ongoing issue with the Denoise feature in Lightroom (cloud version) that is affecting my workflow.The Denoise tool works inconsistently—it will function at times and then stop working without any clear pattern. When it fails, it either does nothing when selected or gets stuck processing and never completes. This inconsistency is causing delays and making it difficult to stay on schedule with client work.Details:• App: Adobe Lightroom (Cloud version, not Classic)• Platform: Windows• Issue frequency: Intermittent but frequent• Impact: Significant slowdown and workflow delaysTroubleshooting steps I’ve already tried:• Restarting Lightroom and my computer• Logging out and back into Creative Cloud• Checking for updates• Attempting the process on different photosThe issue continues despite these steps. I rely heavily on Denoise for my editing workflow, so I’d appreciate assistance in identifying the cause or a permanent fix.Please let me know if yo

Eu troquei de celular recentemente. Instalei novamente o ligthroom. Os presets vieram junto com o backup .   Mas quando eu edito uma foto antes e depois coloco o preset depois ela volta a ter a edição original da foto. Mesmo nas fotos que já foram editadas anteriormente da troca do meu celular.Isso acontece dentro do app. E também quando coloco o preset, a bolinha que fica debaixo  baixo do ícone não aparece. 

I am in the terrible situation, where my dumb a** unintentionally deleted Mobile Downloads file, when trying to clear out space on my macbook. Now my LrC cannot find the files… I am looking for a way to restore/fix this mistake. Does any one have any tips or ideas? I am not very familiar with the lightroom eco system, as you might’ve guessed already…Hope any of you know anything of thisThanks in advance, and kind regardsAnders, a very stressed creative...

So when using the Lightroom mobile‘s camera hdr feature it creates three dng exposures, merging them to one dng with extended dynamic range for editing, which works miracles with enough light.The point where I get stuck is creating three exposures with 3 raw images (-3, 0, +3 EV) in my camera and trying to find a way to get anything close to a similar result as the in app camera hdr feature by somehow merging them into a single file with extended dynamic range and editing it in LrM.Since my options are an iPhone 11 and a MacBook Pro from 2010 with upgraded hardware neither apps like Brackt on iOS nor programs like Affinity Photo on macOS could help creating a merged tiff or raw image that would’ve had a decent quality or would’ve been able to be imported into Lightroom Mobile for editing.Besides of buying a new laptop or installing a more recent macOS, is there any options to create a somewhat similar raw hdr merge with camera files like raf from Fuji in order to edit within Lightroom

  The issue should be self-evident. Tested on macOS Tahoe.

Why does the "provide feedback" link, lead here? 

i have windows app