Photoshop

After updating to Photoshop 27.9.1, the Options bar across the top of the UI no longer works. If I create a gradient, if I make any changes to it via the Options bar, nothing happens. I can’t change Gradient presets, change the the type of gradient (linear, radial, etc), Reverse, or method. These all work in the Properties panel, however, and I have to change them from there. Steps to repeat this bug:Apply a gradient Go to the Options bar at the top of the page with the gradient layer selected and make a change to the gradient or click reverse. Nothing happens. Swapping colors also does not work. Expected Result: Gradient will change by changing settings in the Options bar.Actual Result: The options change in the options bar but nothing happens to the gradient.My computer: Mac Studio 2023, Apple M2 Max, running Tahoe 26.6.2Installed Version of Photoshop: Photoshop 27.9.1This appears to be a bug as it is happening since the last update. Thank you.

Hello,For several updates now, I’ve lost a very important feature in the Layers panel regarding the blending mode dropdown menu. I used to be able to scroll through the blending modes using the mouse wheel, which was extremely convenient. Now I’m forced to change modes by opening the Layer FX panel, which is much less fluid (I’m on a PC version).What’s even more surprising is that the search filter in the Layers panel, just above the blending mode dropdown, still allows scrolling with the mouse wheel.I hope you can restore this functionality that has always been there. Thank you!

updated drivers and reinstalled the photoshop app by issue persists 

Since updating to 27.5 yesterday I’m encountering a bug where when I switch between channels of a Curves adjustment layer the active point is deselected. This breaks flow and slows down the process of getting the color right, which for me typically involves bouncing back and forth between 2 or all 3 color channels (working in RGB) and making one or two point adjustments with the arrow keys.  To reproduce:Make a new Curves layer Add a point somewhere in the middle of each of the R, G, and B channels.  Press Opt + 3, 4, or 5 to switch between the channels.  Prior behavior: you would still have selected and active the same, nth point on the curve. So, if you were on the Red channel and had tweaked a point in the middle, then switched to Blue which you hadn’t touched yet, you’d have the 255,255 point active since it was the second point on the curve. Once all three channels had a point though, switching between them would keep the midpoint selected for tweaking with the arrow keys. Current

Operation was cancelled. Could not download "book.psdc" because of an unexpected error. Please try again. i am getting this error. in photoshop online but i want that file. its urgent.

Hi,for a while now (probably since dynamic filter were introduced), this issue has been bothering me, dynamic filters mask only follow the position and not the resize, they are not linked like a classic fusion mask : - Create a Smart Object and apply a filter to it (ex gaussian blurr).- On the dynamic filter's mask (not the Smart Object fusion mask), paint some black area to hide the blurr effect on the SO (Smart Object).- duplicate the SO and resize it (larger or smaller, doesn't matter). If you look at the dynamic layer mask (you can hold alt and click on the mask to toggle the mask display); you can see the mask has not been resized. I don't understand why there is this limitation when you can resize a SO with a classic mask and the mask will resize accordingly with the SO (or unlink the mask if you want to).Regards, 

Photoshop 27.7, Modern UImacOS Tahoe 26.5.1 After you dismiss Finder’s Save panel (where you can edit the filename and location), the Save for Web dialog won’t respond to ESC or Enter key. Steps to reproduce:Open an image and ⌥⇪⌘+S to open Save for Web Press or click Enter Without actually saving the file, just press ESC or click Cancel to close the Finder SavePanel Hit Enter again. The OS-level dialog should popup again, but it won’t. Hit ESC to close Save for Web, also no response.Workaround: Press Tab once or twice to active and move the keyboard hotzone away from the image preview area. This looks like a minor issue but it’s a pain in the ***.

As the title says, I'm trying to use the new AI remove tool after removing some people using the Generative Fill tool, as the ai generated grass is usually more accurate when using Remove. This is something I have been doing since the remove tool came out, and it has worked without error until last week. Now, whenever I have used generative fill on an image, and I attempt to use the AI Remove tool, Photoshop says "Could not complete your request because of a program error", regardless of whether my selection includes the area where Generative Fill was used. I get the same result if I rasterise the Gen Fill layer, or if I flatten the image. However, if I undo the Gen Fill, or open a new image without any Gen Fill used on it, the Remove tool will work as it is supposed to. The file type does not seem to matter, as I have tried .dng, .psd, .png and .jpg and got the same results for all.   My question is, why might this be happening? Is it deliberate choice by adobe, or an uninte

Will not load, happened after PS upgrade.

Tried to use this feature today (worked fin in previous version of PS) and today, after upgrading to ver 27, I get the "We've temporarily disable this feature because of an error" message. Of course I don't know what that error is, but pretty sure it's an error.    Running Windows 11 25H2 build 26200.7019 AMD Ryzen 7 7000AMD 6600X 8G (latest drivers)

SummaryA regression was introduced between Photoshop 27.4 and Photoshop 27.5 affecting Adobe Fonts integration.Starting with Photoshop 27.5, Photoshop permanently displays a fixed set of Adobe Fonts in the font picker, even when those fonts are not synchronized.The issue is isolated to Photoshop and does not occur in Illustrator, InDesign, or other Adobe applications.The regression is still present in the latest Photoshop release (27.8.x) and in Photoshop Beta.EnvironmentOperating SystemWindows 11 (clean installation)Adobe Applications TestedPhotoshop 27.4.x → Works correctly Photoshop 27.5.x → Regression introduced Photoshop 27.8.x → Issue persists Photoshop Beta → Issue persists Illustrator → Works correctly InDesign → Works correctlyCreative Cloud DesktopLatest available versionAdobe FontsEnabled only for manually synchronized fontsExpected BehaviorPhotoshop should display:Locally installed fonts. Adobe Fonts that are currently synchronized.If a synchronized Adobe Font is removed (d

Hi Adobe Photoshop team,my name is Gianpiero Veronio. I use Photoshop regularly for graphic and cover-art work, and while working on a recent project I noticed a reproducible geometry/rendering issue with the Line Tool.I was able to reproduce the behavior consistently, so I prepared a short report with screenshots and technical notes in case it may be useful to the Photoshop engineering team.Issue summaryWhen a dashed stroke and an arrowhead are used together on a Line shape, the line becomes visibly tilted even though the Transform rotation remains at 0.00°.Steps to reproduceCreate a line as a Shape using the Line Tool. Set the stroke width to 10 px. Apply a dashed stroke. Make sure the line rotation is exactly 0.00°. Enable an arrowhead on the line.Actual resultThe dashed line becomes visibly inclined while the Transform panel still reports 0.00° rotation.Expected resultAdding an arrowhead should affect the arrowhead geometry only. A line at 0.00° rotation should remain horizontal.I

Since version 27.4 and continuing in 27.5 I’ve been experiencing image flickering when using the Curves adjustment. In version 27.4, the issue occurs in all Curves use cases. In 27.5, it appears primarily when applying Curves as a Smart Adjustment on a Smart Object. It is slightly improved, but still noticeable when using Curves as a standard adjustment layer.I’ve attached a video demonstrating the issue: The first example shows Curves applied as a Smart Adjustment on a Smart Object (strong flickering). The second shows a direct adjustment on a non-Smart Object layer (no issue). The third shows a standard adjustment layer (minor flickering still visible). The flickering is clearly visible, especially in the first case.Please look into this issue, as it makes precise adjustments very difficult.Thank you.example video:https://youtu.be/jbe6K-ORr44 

The on-device Remove Tool is consistently slower than Cloud Remove on an Apple M1 Pro (32 GB RAM). The slowdown becomes severe when removing multiple small objects such as electrical outlets.  SystemMacBook Pro M1 Pro 32 GB RAM macOS Tahoe 26.5.2 Photoshop 27.8.0 Native Apple Silicon GPU acceleration enabledExampleOne outlet: Cloud: ~6 seconds Device: ~15 seconds Eight outlets: Device processing takes several minutes. Even on a blank 2000×2000 document with a simple black rectangle, Device Remove takes around 10-20 seconds.I have already:Reset Photoshop preferences. Reinstalled the AI model. Tested newest Photoshop Beta and rolled back to 27.7- neither affected the issue Verified GPU acceleration is enabled. Confirmed Photoshop is running natively on Apple Silicon. 

I am experiencing a consistent issue with Generative Fill in Photoshop 27.8 on my MacBook Pro 13" with Apple M1 (16 GB RAM) running macOS 26.5.1. After launching Photoshop, Generative Fill works correctly for only two or three generations. After that, every new Generative Fill produces severely corrupted results with random black, red, yellow, or blue artifacts. Restarting Photoshop temporarily resolves the issue, but it returns after another few generations.The problem occurs with both empty prompts and text prompts, and it does not depend on the size of the selection. It happens on multiple Canon CR2 RAW files that previously worked without any issues, and the corruption is visible not only in Photoshop but also in exported images. Interestingly, the Remove Tool, which also uses Generative AI, works normally and has never produced this problem.I have already reset Photoshop preferences, reinstalled Photoshop, Camera Raw, and Adobe Bridge, and updated macOS to the latest available ver

Mac Studio M1 Ultra, Tahoe 26.5.1Photoshop 27.9.0 I have been testing the new Harmonize feature a bunch, and all other quirks it has aside, it is near impossible for me to adjust the masks that it produces. I am not sure what is causing this (Gen-AI is my guess..) but I would describe it as an input-lag. If I am trying to manually adjust the mask with the brush tool, I am met with such a delay that I am unable to do anything precise.  The Harmonize feature seems to function at a normal speed, it it just customizing the mask that it produces that lags. I would not imagine my hardware matters here since nearly every other Photoshop feature runs pretty quickly and the M1 Ultra chip is still quite powerful.

No puedo imprimir ddesde la aplicacion de photoshop cuando mando a imprimir la aplicacion se cierra, que puedo hasce

I am still having this issue as of today in the full release, Photoshop 2026 27.9.0. Is there a fix beyond disabling the graphics processor? Turning off graphics processor fixes this issue, but causes Ps to run very slowly.I am not using the Beta version.

When editing an adjustment applied to a Smart Object as a Smart Filter, such as Hue/Saturation or Curves, the canvas does not update continuously while dragging a slider or adjustment control.Instead, the Smart Object temporarily displays its original, unfiltered appearance while the mouse button is held down. The adjusted result appears only after the mouse button is released.This makes it difficult to evaluate small or incremental changes because the adjustment can’t be previewed in real time.Steps to reproduceOpen an image in Photoshop. Convert the image layer to a Smart Object. Apply an adjustment through Image > Adjustments, such as Hue/Saturation or Curves. Double-click the adjustment beneath the Smart Object to reopen the Smart Filter controls. Confirm that Preview is enabled. Click and drag one of the adjustment sliders without releasing the mouse button.Expected resultThe canvas should continuously redraw and display the Smart Filter result as the slider or adjustment value

After several months of correct operation, the program began to spontaneously close. Photoshop 2026 (versions 27.3.1.4 and others), the application consistently shuts down about 40 seconds after launch. This happens regardless of user activity: opening a document, navigating settings, or staying on the Home Screen. The issue reproduces on different computers with different hardware, with updated GPU drivers and reset Photoshop preferences.Steps to Reproduce: Launch Photoshop 2026 (version 27.3.1.4). Wait approximately 40 seconds. The application closes automatically without warning.Windows Event Viewer Log:Faulting application name: Photoshop.exe, version: 27.3.1.4, time stamp: 0x697d544e Faulting module name: Photoshop.exe, version: 27.3.1.4, time stamp: 0x697d544e Exception code: 0xc00000fd Fault offset: 0x000000000102b6eb Faulting process id: 0x3970 Faulting application start time: 0x1DD2653E2BA545D Faulting application path: C:\Program Files\Adobe\Adobe Photoshop 2026\Photoshop.

Issue: Photoshop version: 27.3.1 Release OS: Tahoe 26.3 (25D125)Steps to reproduce:Image > Mode > Duotone… Change Type to Monotone Attempt to name Ink 1 anything with the letter “P” in it You will not be able to type the letter “P” because it will instead toggle the “Preview” box in the Duotone Options panel on and off Expected result: Being able to name an Ink color with words that have the letter “P” in themActual result: Typing the letter “P” toggles Preview on / off  

I'm experiencing an issue with Photoshop web version. When I opening the Photoshop web version, the interface shows only a white screen with all buttons grayed out and unclickable. Problem persists across different monitors and even when switching to another PC. Does anyone know how to fix it? Thank you for any info.

When I'm working on a large batch of images, after a few images, the pen tool path starts to disappear, especially when I'm zoomed in. Restarting my computer and restarting photoshop doesn't fix the glitch. Not every file as the issue, but once a file has the issue, I can't fix it unless I create a new file and copy and paste the image into it. I started doing work paths on most of the remaining images and waiting until I was completely done to "create new path", but I noticed that when I did "create new path" first, the issue would happen instantly. I can sort of work around it by trying to create a path while zoomed out, but that makes it difficult for me to be accurate when tracing the area I'm trying to isolate. I have a 2022 mac that's up to date, plenty of storage and ram and an m1 chip, so there shouldn't be any issues with the software. I first noticed this issue several years ago, I would say at least 2020. 

I use TK9 panel for luminosity masks.  On the same M4 Mac PS 26.11.6 works correctly, PS 27.9.1 intermittently fails when I click TK9 “Save a Mask”. The error message is “The command Duplicate is not currently available.  I have already reinstalled PS, reset PS preferences, disabled Use Graphics Processor.  Could you investigate whether there is a scripting/API change or regression affecting plugin operations involving Duplicate commands or channel creation?

Hi there,   I'd like to report a bug, as in subject. This happens only in 25.9 version, I've downgraded to 25.7, and it doesn't happen.   When I have a document, with couple of artboards in it (let's say, ad banners) - when I try to move any artboard, and, after clicking on the name, and starting to drag it to move it someplace alse - when I try to pass it over any other artboard, or layer, which is outside the artboards - PS freezes.  It happens every time, in every document I've opened.