Questions
Recently active
Thanks for the excellent images put forward in our Halloween ‘Haunted’ challenge. Well done to everyone who took part.There is an old song which started ‘You need hands...’ So, this week we have a set of hands. These three tiny hands are from a wristwatch, and were photographed through a microscope. I am sure you will be able to think of a new use for them, and show us what that is. The “rules”:Use the starter image as at least part of your own image entry. Anything goes, as long as it meets the forum rules on decency, copyright, etc. Anyone, and everyone, is welcome to have a go, whether you are a complete beginner or a Photoshop expert. This is not just for our forum “regulars”. The challenge is not limited to Photoshop. Any Adobe software can be used. There are no prizes apart from the chance to practice, show off your skills, or bring a bit of humor and fun. Don't be shy, join in and have a go! The starter image is made available for you to use in this forum challenge only.To down
This amazed the heck out of me, so I have to share. My wife is President of a local Garden Club and asked me to help create a poster for an event. Because she has never used Generative AI, she was not encumbered with thoughts that limited what you might reasonably ask of it, so she gave me this completely (I thought) OTT prompt to paste in its entirety into the Prompt to Edit text field:Create a premium A4 Christmas Lunch invitation for the Awatere Garden Club. Surround the entire invitation with a lush, realistic floral border dominated by bright red New Zealand pōhutukawa flowers, silver fern fronds, kawakawa leaves, mānuka foliage, native greenery and a few hydrangeas and roses. The border should be abundant and elegant with no empty corners. Add subtle gardening elements at the bottom including a vintage watering can, garden trowel and gardening gloves. Centre panel in warm cream parchment with sophisticated typography in deep green and Christmas red. High-quality print-ready de
I recently had to reinstall my legitimately purchased copy of Adobe Photoshop CS6. Despite properly deactivating the license via Help > Deactivate beforehand, I am now unable to register or activate it with my valid serial number. It seems as though something is still holding the activation slot, preventing me from completing the registration process. Is there any official solution or workaround (such as an offline activation request/response code or a license count reset) that will allow me to continue using the software I legitimately bought?
Hi All,latest update of RAW (# 17.2 - Feb. 2025) - crop tool is missing.Can anyone tell me where it went? Thanks
Thanks for all the entries in our previous ‘You need hands…’ challenge. There were some very clever ideas.This week we are off to Whitby on the North East coast of England. The abbey pictured was built around 1220 - 1350 but the site has held a monastery since 657 AD. Built on the top of the headland, and reached by a climb of 199 steps, it also provided inspiration for Bram Stoker’s 1897 story of Dracula. It appeared in the story as did St Mary’s church, the roof & tower of which can just be seen to the right of the ruins.With such real and literary history, we have a scene in which you can let your imagination run loose. What will you make with it? The “rules”:Use the starter image as at least part of your own image entry. Anything goes, as long as it meets the forum rules on decency, copyright, etc. Anyone, and everyone, is welcome to have a go, whether you are a complete beginner or a Photoshop expert. This is not just for our forum “regulars”. The challenge is not limited to P
Hi,Not a major, but annoying none the less.I’ve just upgraded to photoshop 2027. I typically do lots of levels adjustments, where I adjust by pulling the edges of the graph inward, before using Command + ~ to move to the next image.In the latest version of photoshop, the number that tells you the value of where you’re pulling the edge of the graph to, is highlighting (so someone could easily type in a value instead). It didn’t do this in previous versions (or if it did, it didn’t affect the keypad shortcuts). This is really annoying, as it means I have to click out of it for my command + ~ to move onto the next image and a lot of the time, it ends up moving the adjustment I just made.Is there a way to stop the value highlighting?
Adobe Photoshop CS5. Activation limit reached. Original PC crashed, replacement was destroyed. I have no means to deactivate previous installs. Need assistance for a means to clear activation limit.
When using the remove tool in 26.10.0, if the box "Create new layer" is unchecked, it still creates a "Remove tool edits" layer.
hi all! i am looking for a ‘paint inside’ function for brushes. It would basically would be the opposite of ‘behind’. (the latter is a function to not paint over earlier paint.) But I want to paint only in what I have brushed before, or preferably even in just one colour of the painted matter ;-)There is such a function in Adobe Animate, and of course in Affinity. Why not in Photoshop? or am i missing it?
I know this has been asked before, but after reading several threads and watching a couple of youtube videos, it’s still not answered. Or I don’t understand it. I want to create a droplet that reduces a file to 1500 pixels wide and then does a “save as”. I can do that, but I can only select a directory where the file always goes. I can’t tell PS to save the file in the source directory. That’s what I want. I want to save the file in the same directory as the source file. Scenario: We do fine art scanning. Once we are finished editing and ready to dropbox files to the client, we do the following to a file: Flatten the TIF file Save Use File → Automate→ Fit Image: Set file width and height to 1500 pixels so the file gets reduced to 1500 pixels on the long side. Save as → Save as JPG and append the file name with -web, ie. scanfile-web.jpg Close original file without saving. The action looks like this: The problem is that when I go to make a droplet, there is no option for Source Folder
I've got Ventura 13.7.8 on my iMac , it's not compatible to PS 2026 (as it automatically upgrade) how to get my older version of Photoshop 2024?
Photoshop 2026 been slowing down worse and worse with every update, and after some testing I’ve found that the performance is significantly better when GPU is disabled (but still pretty poor), and also significantly better in the 2025 version. I remember the versions before 2025 ran significantly better as well and figured that the performance issues in the 2025 version would get patched with time but now with 2026 versions it has gotten so bad that its becoming almost unusable for digital painting.My computer is well above the recommended specs with a compatible GPU for photoshop and can run most AAA games at high specs with no problem and runs great when doing 3D modeling in blender but struggles with even tiny file sizes in photoshop. for example if i make a tiny 64x64 pixel canvas in photoshop 2026 and simply attempt to pan and zoom a blank canvas, my GPU and CPU show over 80% usage and i get what looks like less than 2FPS with screen tearing. When I attempt to draw or resize layer
Photoshop 2026 will not open any JPEG files. I receive a message that says “Could not open “file name” because the file was not found.” Yes, the files are there and are uncorrupted– Preview and other other apps have no problem with the JPEGs. It does not matter if the files are local, on a drive, or wherever. Also, photoshop has no issue opening PNGs, PSDs, or really any other normals file formats. I recently updated, reinstalled, restarted, and deleted photoshop 2025 from my machine to try to remedy the problem. I’m working on an iMac 2020 with Sequoia 15.7.3As a work around, I’ve been opening the JPGs in Preview and copying and pasting them into a Photoshop file, but I’d prefer a real fix over this method.
Could some one tell me how I can fill the outlined space with colors that match the dinosaur's body and add matching reflections of the mountains in the water?
I’ve started using adobe design to rough at multiple canvases for the different uses like IG and tiktok but they seem to only be exportable as flat-ish files. Why can’t we export to a layered PS file?
Just want to share this information and see if there are any insights.I work on a very capable computer (96GB RAM, fast internal hard drives, etc.). I keep three versions of PS: The latest update, the latest beta, and version 22.2 (last version with 3D). Currently, I have v 28.0, v 27.11.1, and v 22.2. My settings are optimized for large files.For the approximately 5 years that I’ve had the machine, I have routinely worked on files of 30GB – 40GB with no problem. However, with versions 27 and 28, I have had problems working not only with large files but also with much smaller files. For example, I duplicated a set of layers into a separate temporary file of 3.6GB, and even with that, if I create a Camera Raw smart filter, black mask it, then try to gradually brush in the filter effect (texture), I get a revolving lag wheel with literally every brush stroke. However, if I go back to v 22.2, the problem disappears.Does anyone have any idea why that might be the case?
So when I save (on a PC so Ctrl + S) it locks out the screen so I can’t do anything. This was something that had been changed with the save in the background feature in V27 I believe, now it has reverted back to old behavior. As I said I have the “Save in Background” box checked tried toggling it on and off but it hasn’t made a difference.
quiero imprimir mis fotos y la impresora cambia los colores
Issue: In Recent photoshop Updates the setting ”Initial Direction” in "Shape Dynamics" in brush settings is BUGGED and does not consistently work as it should. Photoshop version: 24.0-25.2 OS: MacOS 12.7.1 Steps to reproduce: Take or make a flat brush (you can create it by setting a round brush to 90 degree angle and 8% width in the ”brush tip shape” settings) Go into ”Shape Dynamics” and turn on ”Initial direction” in the second drop down menu options. Now use a tablet and pen and draw 10-15 strokes as if you are drawing straight lines in the same direction and you will see the problem. Expected result: If you draw with a Wacom pen or an equivalent tool, You SHOULD get a consistently flat wide brush strokes as you pull in the same direction as described above and do not change direction mid stroke etc. You should NOT get thin strokes with the settings described above. This has been how these settings have worked for 10+ years
Hi everyone. The brush and eraser tools in Photoshop are behaving VERY strangely!I’ve been using Photoshop for 20+ years and I’ve never seen this before. What happens: I select the eraser tool. I make one single click (to erase one spot). The eraser tool makes wild random streaks across the whole page. I press Ctrl+Z to undo. Start again. One click. More wild random streaks in different places.See screenshots below (before and after).The same thing is happening with the brush tool. One click and the paint makes wild random streaks across the image. Any ideas why this is happening?? Note: This has happened before AND after updating to the latest version (v28.0), so it’s not related to the current update.Note: I am NOT using the AI Assisted function. IMAGE BEFORE IMAGE AFTER MAKING ONE CLICK WITH THE ERASER (example #1) IMAGE AFTER MAKING ONE CLICK WITH THE ERASER (example #2) IMAGE AFTER MAKING ONE CLICK WITH THE ERASER (example #3) IMAGE AFTER MAKING ONE CLICK WITH THE BRUSH TOOL (
Sur mon pinceau et ma gomme j’ai un contour intérieur. Arrondi net, dureté à 100%… impossible de trouver d’où vient le problème
Photoshop 28.0.0 20261027.r.20 395c45 x64 (final, Release)When using Hue/Saturation and using preset “Default” the colours displayed are wrong.The first colour after the multi colour wheel used to be red. It displays as yellow, but the slider still indicates red. Using that slider, the red colour is influenced.Next is the green, but it is actually the yellow slider, etc …When using the preset “prominent colors” the colour sliders are correct. But not when you toggle back to “default”.Included is a screenshot when selecting the Yellow dot, but the slider display red (this should be the first colour, not yellow)
Dear all, I made a panorama photo from 3 photos, but unfortunately there are several mismatches in the photo and I do not have the 3 original photos anymore. Does someone has a solution how to solve the mismatches?
Magnifying glass is an easy to find option in photoshop tool bar in the desktop version. Why hide it in the web version?
Already have an account? Login
Enter your E-mail address. We'll send you an e-mail with instructions to reset your password.