Premiere Elements

Hallo Adobe, ich habe Jahre lang  mit Premiere Pro CS5,5  gearbeitet, da ich nun windows 10 installieren muss, wird das nun sicher nicht mehr gehen, schlimm genug. Noch schlimmer, dass das neue Premiere Pro NUR mit monatlicher Gebühr zu haben ist, das kommt in keinem Fall für mich in Frage. (Ändert sich das vielleicht wieder?) Würde ich mich für Premiere Elements entscheiden, kann das Programm folgendes? : Ich brauche nur einige Funktionen, da ich Filme NUR AUS STANDBILDERN mache, aus jpgs und gifs, die ich aber in SEHR VIELEN EBENEN übereinander legen muss. Dazu muss ich Ebenen ausblenden und sperren können. Ich brauche ca. 15 Ebenen übereinander. Geht das mit Premiere Elements????? Dann brauche ich noch, dass ich diese vielen einzelnen Bilder extrem variabel animieren kann, sowie gute Überblendungen dafür, mehr brauche ich nicht. Aber das muss schnell und leicht gehen. Wie eben in Premiere PRO - ist Elements dafür überhaupt geeignet?  Soundbearbeitung sollte in den Gru

I have just invested a lot of money on an RTX 3080 because it is supposed to be supported for GPU acceleration. To my surprise it says detected card is RTX 3080 but says detected graphics processor is unsupported. Whats going on? Is it supported like Adobe says it is, or isn't it?

Wie kann ich das problem lösen?Danke im vorraus für eure hilfe.

Hi, I have been using PSE 20 without any big issues for editing videos. Until today where I have spent hours trying to complete a  9min video and right at the end of the rendering for export and sharing I get this message..."File imported detected an inconsistendy in the file structure of morven.mpt4. reading and writing this files metadata (xmp) has been disabled."the only operable icon is to press Ok then I am back to the start again..There are 66 video clips, mainly go pro and dji drone 4k footage, one music track and that is it. I am trying to save to 4k and wait for over an hour to receive this message at around 98% complete..this is the 3rd time today!!Can anyone advise?Thank you

I have Adobe Photoshop Elements 2020.Can anybody tell me why when I right click on an audio track on Audio 1 and click on fade in/out it does not work. Just to mention there is a small 5.1 being displayed just by the wording Audio 1 if that's anything......Thanks

After update for my Elements 19, individual thumbs changed to touching each other.  How do I change back to separate pics, showing stacks?

GREETINGS! Can ANYONE help...?  In my 'add mediatab, I want to search for a file but the SEARCH TAB won't allow me to type thename of a specific file I'm looking for! Does ANYONE have a clue or knows how to fix this annoying issue?? 

I have  worked over 3 hours and cannot get the microphone to record.

In 2018, I bought Premiere Elements in one of the stationary stores. I have activated the program and it is visible on my adobe account together with the download option and serial number. The serial number is also on the envelope with the CD in the box. I haven't used this program for over 2 years and decided to give it to my brother.After the installation on his computer, a message popped up to deactivate the program on another computer. Now I have information that the product key is not genuine. What can I do with this ?

Hi,I bought Adobe Premiere Elements 2020 and I'm happy with it. But now I have had a problem exporting to my PC. Every time there was a crash of the program.OS: Win 10 proRAM: 32GBySSD, NVMEGPU: GTX 1080 TiCPU: AMD Ryzen 7 3800xAs it turned out, it was my CPU.... Since the program is not AMD compatible?Have been able to export the video to my laptop with an INTEL 7 CPU without problems.....Guys, I buy a software and already assume that AMD CPU's are also supported.

I am using PRE19 on a Windows 10 computer.  I am creating a movie menu for a DVD (the "Art in Motion" version).  When it comes to the scene thumbnails they are stretched horizontally so that they look unnatural.  The problem is that the original movie was 4:3 (from old 8mm cine film) but now within a 16:9 format so that there are black bars either side.  When filling the scene thumbnail it seems that the program wants to remove the black bars and so stretches the image.  When I try adjusting the image by using the grab handles on the surrounding box it stretches the whole picture frame, not just the image inside it.  Is there any way I can correct this so that the images appear normal?

Although I set the sound of a video clip to 0dB I can still hear the sound. Is this a known problem?

I use the laptop NOT connected to the internet.photoshop elements 2021 and premier elements 2021will these work fine offline?are they on a disc or what?anything else i should download?how do i register them? will premiere do 4k video editing.i will get a windows 10 to use them as they wont be happy on my windows 7 !thanks all

I am at the very end of a project, days worth of work, due tomorrow.  I added one video clip that happened to be a GoPro 240 fps shot-different than the rest of content.  Immediately this started causing hang-ups and in a panic, I saved to protect my work.  But now that decision haunts me because whenever I open the project it starts trying to "conform" this one clip, and never moves past 2%.  I cannot remove or delete the clips because it freezes or crashes if I try to do anything.  I am ready to cry.  CPU, Memory, and disk look fine in task manager, nothing over 34%.  Please Help!!!

I've been using Premiere Elements for some time now, with several different projects of mine. I am far from an expert though, and need som help with a recent issue of mine. I have been using Elements and Elgato together, to record and edit footage of different things, and recently Elements has stopped accepting video files longer than 15 minutes. When I try to use a file longer than that it pops up an error message saying "The Importer Reproted a Generic Error." I have in the past been able to use files of up 2+ hours in length and had no issue whatsoever. I have already lost dozens of hours of footage to this issue, so any help on the matter would be greatly appreciated.

I have video with sound shot on a phone as variable rate 1280x720 (peak 30.08fps) 720p and .mov fileWant to display it on a flat screen TV or monitor as 1920x1080 in 1080p.As others suggested, first will use Handbrake to convert it to fixed 30 fps, 720p  So far, I have figured out 3 choices:#1. Use Handbrake to simultaneously also upscale to 1080p and then import to PE 2021 for final video editing#2. Use PE 2021 to upscale to 1080p and  for final video editing#3. Use PE 2021 to do final video editing in 720p and then use full screen option on VLC player What option would produce best quality?If there is no discernible difference, which option would be preferable? Thanks! 

PE 2021 in Expert mode on a WIN10 PC... I know that via Project Assets & New Item / Black Video that I can insert a black video into the timeline but how can I insert a white video? I have almost completed a training video comprising numerous slides & a few video clips all with voice-over.  I want to insert a JPEG of a 1-page document & then zoom in (Pan and Zoom) to various parts I am describing.  However since the document is A4, when I add the graphic to the timeline there are black vertical bands to the left & right (of course).  How can I replace these bands with white?  If I could put a white video on Video 1 & have the graphic on Video 2 I'd be OK (I hope).  But how to get white video?  Or is there a simpler method? All advice gratefully received.  

In PE 2021, under Project Setting >>> GeneralI am importing video from the phone... shot at 30.08 fpsThanks for pointers!  

There are no similar matches in the menu of PE 2021The export of a project will be to mp4 H.264 either in the same 720p or by upscaling to 1080p Thank you!

None of the menu themes are a good fit for the project I'm currently working on. I've tried to google if it is possible to make a custom movie menu but haven't found anything so far. Has anyone been able to make custom menu icons or anything like that?  I know you can change the backgrounds, font for the text, and some other small things, but I want to be able to add a custom icon for the chapter selections. (Mini side-rant: How is premiere pro the industry standard video editor and yet I can't make a main menu for dvds in it?)

As i am trying to move the timeline cursor little vertical lines keep popping up and stop me from grabbing the timeline cursor. How do it rid of these? 

I have an older video recorded in 1280x720p and I would like export it as either: same 1280x720p format without black barsORconvert it to 1920x1080 format (so I will not see black bars) Using Adobe Premiere Elements 2021 Thanks!

When loading a video in MP4 format from Sanyo Camcorder, which is 4GB / 35'26'' long, Premiere Elements 2021 says it is only 5'36'' long and it runs much too fast - what can I do?In the internet I found some hint for a similar problem with Premiere Pro, where the audio input channelhad to be switched off to solve the problem, but this did not help in my case. 

Received this error on Premiere Elements 10 when attempting to insert Text into a timeline.  This just started happening.  An uninstall/reinstall of the app did not help.  Still get the error. Premiere Elements has encountered an error. [..\..\Src\Sequence\Link.cpp-80] Any thoughts?

I'm using Adobe Element Premiere Elements 13, have a video (MP4) of which video is fine but there are at 2 different spots 1 word I want to mute or replace with a beep. Can I do that with this application and if so, how?