Premiere Elements

I get a 404 Error Page when trying to activate the MPEG2 Component in Premiere Elements 14 for Windows

Had to reinstall from original discs. Now get an error message when rendering. Activate Component. MPEG2. Copy serial number. Follow link, paste, copy unlock code and paste in original pop up.  Trouble is the link is no longer active and gets diverted to Adobe home page. Help desk cannot help and advised I should try the forums for the answer. Or buy the upgrade. I'm only an enthusiastic amateur and really need the upgraded version.

I have a 4k video I recorded from an iphone 8 , using an app called 'ProMovie'....I sent the file to my pc for editing in Adobe Elements which I recently bought and am very new to. The video looks fine and dandy when played back in any media player on the pc, but when I load it into Adobe Elements for editing,etc, it appears to have ever  so slightly slowed the video down. It becomes VERY evident when  my hands are moving fast or there is faster movement on the screen. It's almost like the old days when you had a really slow computer that couldn't keep up with streaming or processing video. My system specs are pretty good though, AMD RX 570 video card, AMD Ryzen 2700X CPU , Asus Rog Strix 450-F motherboard, 16 gigs of memory....clearly the system is NOT the reason. What was really disheartening, was when I exported the project, thinking maybe that slight slowdown in the video would not occur in the final output, I was disappointed to see the resulting file had the slowed down

I'm on Premiere Elements 2020 (I didn't see a community for it).  I have some footage shot on a 10+ year old Canon Vixia HF S100.  The camera frame setting was 60i.  The clips are MPEG, codec is AVCHD H.264 4:2:0 and a frame rate of 29.97.  When I play this footage in my previewer (Not Adobe) it plays beautifully.  When I preview it in my timeline, it's jerky as hell and seems to be at 70% speed. I've tried the following project pre-sets:AVCHD 1080p 60Full HD 1080i 30 HD 1080i 30 (60i)Tried all as drop-frame and non drop-frameThey all seem to reset to HD 1080i as soon as I play any clip in the timeline.  It looks really bad and seems more than just a bit slow in playback.  Is there chance of using this footage?  Is there something that Premiere Pro could do to address this that Elements can't do?

Does anyone know if Premier Elements 15 has a setting for cinematic widescreen beyond 16 X 9? The video imports fine, but pan and zoom only applies to 16:9, unless there's a way to change the settings that I'm not seeing. Thanks 

On my desktop computer, the iphone .mov files imported into Premiere Element 2020 playback to fast, as if they are time-lapsed. They import fine on my laptop. There must be a setting that's off but I can't change the video settings because they are greyed out.

I've already purchased the Adobe Elements 20 bundle which includes Photoshop and Premiere. But, when I click on the download link, neither of them will let me download them. I paid already, but I can't even download the programs. Any help?

I want to change the language in Dutch.As I bought this progamm in France, Dutch seems not to be available on the installation disk.How do I resolve this problem ?

When I try to import a Video or a Picture the screen get plenty of stripes and looks like that.What can I Do ? Many thanks for your suggestions.Roberto 

I'm finished my home videio editing. When I opened it to burn into a DVD-R it had a portions wich needed to be rendered. It started to render but stopped 5sec into it. I closed it to re-try it and same thing keeps happening. I also tried deleting that portion and tried burning, but now it doesn't want to burn. I get an error that there's not enough space in the disk?

This is on an Apple iMac running 10.13.6 I just did a trial install for Premiere Elements.   It seemed to work and I ended up with a new app in the Applications folder.    I can bring up the main screen that has thee options for organizers, photoshop elements, or Premiere Elements.  Clicking "organizer" works.   Clicking "edit video" does nothing.  A message pops up saying it is loading the video edit workspace but it never does load. Also in the Application folder is the editor app "Adobe Premiere Elements.app" (a 2.28GB app bundle) but clicking this does nothing.  Looks like it tries to load then fails silently.

Hi. I have a Panasonic video DV camera and windows 10. When looking at my devices, it seems that Windows does recognise my Panasonic NV-GS320. However Premiere Elements 14 doesn't identify my device. Using Firewire to connect the camera to my PC.When I had Windows 7, I could use Windows Movie Maker to import films but this program doesn't seem to exist anymore...Anyone  

Bonjour,Sur Adobe Premère Elements 2018, qui s'ouvre normalement, je peux insérer des images ou des vidéos sur la timeline, mais impossible de lancer la lecture qui reste figée. Si je déplace le curseur de lecture manuellement sur une autre image, rien ne se passe elle reste bloquée sur la première image insérée. Le logiciel est donc inutilisable.Dommage, car je n'envisage en aucun cas de passer à une version par abonnement, beaucoup trop chère.Si quelqu'un a une solution, d'avance merciDaniel Buob

I am having trouble with jittery video while I am editing. Everytime I make an edit and go to watch it back it is very jittery and its difficult to review what I have actually just edited. I am running windows 10 on a Samsung PC.I was hoping someone could give me some advice on how to help. Thanks.

Bonjour,Alors que PE13 fonctionnait parfaitement, depuis la mise à jour de Windows, il ne s'ouvre plus.La fenêtre de chargement s'affiche quelque secondes puis disparaît... et plus rien ne se passe. Que faire?Merci pour vos lumières !

I have a project with 4 clips a 3-6gb (1920x1080, 25mbit/s - h.265). Initally playback of the clips works fine. I can switch between the clips over the time line.After a couple of switches (4-5) the preview videos freeze.While audio is still replayed. I can still switch the possition. But only the corresponding audio is replayed not the video. Sortly after the application freezes.Sometimes I get the "media pending screen" or simply black screen ( both for ever)-but in the Task-Manager/Performance Meter I see there is no read from the harddrive by adobe premiere elements 2020 or any other app.The application itself is installed on SSD. The to be edited video on a high performance (220mb/s) hdd.(System is a 32gb of RAM on Intel Core i7 8700, Nvidia 1080 GTX, Windows Defender)

On an Apple iMac running 10.13.4 Organizer shows all the 1000+ photos in my library but all of the 60+ videos show as grey boxes.  When I try and play one I get an error box that has my system is missing the required codec.    I doubt this as every other video player on my system can play these.   They were recorded in an iPhone 6. I have tried transcoding to different formats using 3rd party software with no luck.   the file is an MP4, codecs are h.264 and aac. Could this be related to the other problem I posted where Premier Elements silently crashes before even putting up a splash screen?

My Premiere Elements 2018 crashed earlier today and will no longer work correctly.I can open it and add media and put it in the timeline and render it  but it will not allow me to do anything else.It will not play, will not edit, will not recognize my headphones and when I try to close it, it just freezes up and I have to go in through the task manager to close the program.It is not giving any error messages. I have restarted my computer many times and cleared all the cache files. If anyone knows a fix for this any help would be appreciated. thank you

I bought a combination Photoshop Elements / Premiere Elements years ago for a XP computer. Will it install and be useable on my newer Win 7 Pro system?

I have premier Elements 2015. There is a software fault in that the archive function does not work. It is supposed to strip out any assets not used in the presentation. Not only does not strip those assets out, it adds in any assets that were previously used in the make up of the presentation and which have subsequently been deleted. They are not in my assets list but appear in the archive.I have downloaded 2020 version and tried this. The same fault exists!Adobe’s reaction – buy 2020 and we will provide support. Wake up guys – this is not support. I get support, helping me find may way round a new product, learning to use new things. I get that!This is a fault. You have sold a product that does not do what it says. In the UK that is an offence under the Sale of Goods Act. To continue committing that offence year after year is totally unacceptable.I don’t want support, I want you to tell me that the problem is being investigated and to tell me when it has been fixed. I want you to tell

I have the video editor Premier Elements 2020. I wold love to use some cool "motion titles". Are ther any templates out there I can use? Seems all I came across is for the Premier Pro. If I happen to find motion titles, then how would I import them to my Premier Elements 2020? Thanks!

PROBLEM:  We cannot resize our Adobe Premier Application window on the desktop.  Is there a setting or preference that is forcing the application window to full screen? BACKGROUND:  In Microsoft Windows, most program or application windows can be Full Screen, Resized, Minimized, or Closed using the buttons on the top right of the application's title bar.  In our case, we can use the all these buttons.  Nevertheless, when in the resize mode, the Adobe Premier application window is display in Full-Screen, but will not allow you to resize the application window.  We get the context arrow on the borders of the window, but when we drag it flashes, initially showing some of the desktop, but snaps back to full size when you release the mouse button.

I've made a short video logo project (video, text, and sound) that I would like to insert near the beginning of other video projects in Premier Elements 2020. I've tried to import from files, copy and paste, and add  from media resources. Nothing has worked.  Can it be done and, if so how?Thank you very much!

Sehr geehrte Damen und Herren,Eine Tonspur ist vorhanden und wird angezeigt. Beim Abspielen werden im Master Fenster beide Spuren angezeigt. In Voreinstellungen Audiogeräte ist als Ausgangsgerät Lautsprecher (Realtek High Definition Audio) Not Working aktiv. Ein Umstellen auf Realtek Digital Audio wäre noch im Angebot ergibt aber folgende Fehlermeldung"Die Geräteeinstellungen konnten nicht übernommen werden, da folgender Fehler auftrittMME device internal erro OK. Jetzt wäre eine Auswahl Lautsprecher (Realtek High Definition Audio) möglich mit gleicher Fehlermeldung. Geräteklasse ist MME, ASIO funktioniert nichtDer Sound ist on Board und funktioniert bei allen anderen Anwendungen. Ein Export als xxx.mp4 und abspielen in einem anderen Programm ist der Ton hörbar.Im Lautsprechersymbol unten rechts in der Taskleiste ist im Lautstärkemixer Adobe Premiere voll aufgedreht.vielen Dank im VorausAndreas

So I've been using Premier Elements 2020 for mulitple videos (around 100), never had any exporting or rendering issues. Until tonight. It's giving me a rendering time of over a month, and a exporting time of anywhere from 16-24 hours. My videos are typically anywhere between 45-60 mins, and the export process usually takes 30 mins tops. I'm using an Alienware R15 with nVIDIA Graphics Driver (which I just updated thinking it was that). Nope. Please help as this is vital to my work. Thank you