Premiere Elements

Hello everybody, thanks to help me. We have issue with adobe premiere element when we close a project. It is not possible to open a new project. Screen is frozen and we have to restart computer to open the project again. Sometimes, during a project, screen is frozen too. Do you meet this issue ? Thanks a lot for your help. Regards Maelus76   [title edited by mod]

Bonjour, je souhaite exporter partiellement le contenu de la timeline.Je fais des vidéos de batterie, j'enregistre plusieurs exercices en 1 seule fois avec le son sur la caméra et sur un second appareil de bonne qualité. Sur la time line, je synchronise les deux puis je peux faire le montage que je veux. Mais quand j'ai fini le premier exercice je dois tout recommencer pour accéder au 2eme exercice. Y'a-t-il donc un moyen de mettre plus loin sur la timeline le reste qui est déjà synchronisé et de n'exporter que le montage du 1er exercice.Cdt,Chegué

Hello. I have a disk copy of Adobe Premiere Elements 10.  I want to install it on my laptop, but it doesn't have a disc drive. How may I go about doing that if it is possible? Thanks, Tristan  

Wie kann ich die gewünschte Audiospur wählen ?Laut VLC hat das Video (.ts) 3 Audio-Spuren. 1 deutsch, 2 englisch, 3 deutsch.Dummerweise selektiert Premiere genau die nicht gewünschte 2. Spur(englisch) und ich finde keinen Hinweis, wie ich die gewünschte Spur auswählen kann.

While applying motion effects to still images I see that I have some options for both Temporal and Spatial Interpolation in addition to Ease in and Ease Out.  Through lots of experimentation and trial and error I have been able to create unique motion paths using keyframes.  However, it seems that though the shape of the keyframe marker changes when you set different options such as Bezier or Auto Bezier or Continuous Bezier, other than for Ease In and Ease Out, there does not seem to be any real change in what actually happens or my path options.  Can anyone advise me as to where to go to get more detailed information on these options in both Temporal and Spatial Interpolation.  I have searched every place I can think of for additional details with no success so far.TIA

Sorry for such an elementary question. But, I'm interested in editing continuous drone video. My pitiful current editor will not, with ease, edit center portions to create clips which can then be used with transitions. Will Premier Elements 2020 take an 8-10 minute continuous video and allow for clipping pieces out with relative ease? Everything I've read details "trimming". Current crap software will trim from the ends. Appreciate a quick word from the pros. 

I have a clip that is a picture of an email and I want to highlight part of the text. I need to draw attention to the text. Is there a way to put a box around it? 

Premiere elements 2020 windows 10 Error: this type of file (AVI) is not supported or the required codec is not installed What do I do now?

Hi, is there any way in Premiere Elements to change crossfades duration e.g. 0.8 sec (20 frames) or 1.8 or..Its always fixed to full seconds after OK. What did I wrong?

I am working with Premiere Elements 12.1 on an iMac running High Sierra 10.13. I read a support article that implies you can have multiple main menus, but I can't figure out how to get it to work.  I would like to make a DVD of a four day trip to Disney.  I would like my main menu to have the four days displayed, then choosing a day would bring up a scene menu for that day.  Each day would have 4-6 scene markers to various activities for that day.   The goal is to allow someone who wanted to jump to a scene on day 4 for example from not having to go through a number of "next" menus to get to the one scene desired.   I also would like the ability from the main menu to just do a play all and have it run through all 4 days.  (It's a 2 hour movie.)  The article I read implied that you could have multiple main menus, but it sounded like you couldn't play through the entire DVD if you did.  It wasn't very clear on that. Any help wou

I have Premiere Elements 12.1 running on an iMac running High Sierra 13. I am able to track an object using the Motion Tracking Tool.  On the Track Object screen, it says "...you can use the motion to attach graphics or text to it."  After defining and setting the object, the Track Object screen then says "Attach a graphic or text from the action bar below."The only highlighted option in the action bar is Graphics.   I don't see an option under Graphics to just put text.  I see options to put text into a graphic, but I simply wanted to assign a name to my tracked object but I don't see how to do that.Am I missing something obvious here?  Any help would be appreciated.  Thanks. Rick

I am new to Premier Elements video using 2020 version.  I have created a number of videos and have added sound tracks.  The are saved with the extension .PRV  How do I combine them?  I have tried importing them - won't work says error.  Tried adding the videos as media and it shows about 5 rendered clips with no attached Audio.  Each created video play perfect alone.   I'm super frustrated.  Thanks for any help you can give.   [To find a forum for your program please start at https://community.adobe.com/][Moving from generic Start/Help forum to the specific Program forum... Mod]

Hello everyone,I'm working on a small project where I used the shake reduction feature on a few clips. I was able to export the project once but now every time since, it gives this error:The clips themselves don't claim to be working on shake reduction and I can preview the entire project with out the blue line that says "shake reduction in progress".I've tried about everything I can think of including deleting the shake reduction from every clip in the project but it still gives this same error. I've closed and reopened the project. Checked project settings. Waited a couple hours with the project open. Even restarted my computer. Is there anyone that has the same problem and got it figured it out? Or anyone that thinks they know what my problem is?Thanks in advance,Wes

Extremely slow rendering for media files. Just trying to simply render video file after slowing it down 25%, file format is MP4, see attached picture for further file details. I highly doubt it is a hardware issue either (Asus ROG Zephyrus  GX701GXR.306). Also further note I tried slowing down the video in Video Editor, (Microsoft preinstalled application) and it had no problem rendering and slowing down the 5 second clip almost instaniously.  

Creato un filmato, non riesco a esportarlo, compare la finestra incompleta  e il programma non risponde, devo riavviare.Come rimediare?

I am currently running Adobe Elements 14. I wish to upgrade to elements 2020, but I am reluctant to do this, if, when running premier, I will still continue to receive the notice 'detected incompatable driver.  This results in totally freezing my computer meaning a restart, after which the program starts with no bother. An upgrade will cost me £100 or so, an absolute waste for a dubious program! Cannot someone from Adobe fix this problem? I doubt that it is to do with the Graphics cards as some Adobe technicians suggest, because people with other cards than mine a experiencing the same problem. I live in hope that this problem willbe resolved soon.Regards Vic.

Is there any possible option to add a stop color in linear gradient in legacy title??

How do i start a new job so that it can be in 16: 9 format.I work in the PAL format. When I start a new job it will not be in 16: 9 format. There is something missing from org. the movie on the left and right side and only 4: 3 format is displayed even though I have set my new job to FULL HD 1080i 25 Niels Lauritsen, DK

Hey everybody, I'm wondering if theres a way to save an animated text layer that I created. Its something that I'd like to be able to use in multiple projects so instead of having to recreate it every time I start somthing new I was hoping there was a way I could save or import it from the project I created it in.Thanks

I have just installed elements 12 today on a windows 10 laptop, edited a couple of videos. Installed updates and uploaded video to Youtube. So I go back later on because my friend wants a file for her computer. The video and files are all missing. Says that the codex for them is missing. I think the data is there but they will not load on the editor. Any ideas?

When I download my photos into the Adobe Premiere Elements 15 program, some of them are distorted as the video plays.  How can this be corrected?  They are all jpeg files and all are a high resolution.  What gives?

I recently purchased Photoshop/Premiere Elements and did was able to produce one video perfectly. The last three times when I try to publish in any form, I get audio but no video. I am using an iphone 7 and Windows 10. It plays perfectly in Elements but not when I save or try to publish directly to YouTube. Thanks,Chuck

Hello,  I've been working with the trial version to se if I like the product. I finished my work and realized the final is marked by "created with the free version". So I bought the product because I enjoyed using it. Otherwise it still apply me "created with the free version" on my old project. Could you help to figure it out? Regards

Hi,  I would like to create a IGTV video where the frame will be vertical to suit a phone (1080 Horizontal and 1350 Vertical) How do I get this into my project reset? can I create or download a preset for this? I currently have Premiere Elements 2019  Thank you 

If there is a way to insert a traditional time code into my clip/video in my using PSE 2020 I have not been able to find one. Aparently pro has the feature but not elements . Any one have a suggestion?  Thanks in advance