Premiere Elements

HiI am using Adobe Premiere Elements 2018 and I like it very much.However, I have a question on a challenge that some of you might have already resolved.I have a MPEG Video (in "ts" format as it was recorded with a receiver from TechniSat) that has 2 english and 1 french audio streams.When I import the MPEG Video the french audio stream is loaded automatically (by default). I can then only edit the french version of the Video.How can I switch to the english audio stream?Regards

Hopefully an easy answer, but couldn't find it by searching the forum or online.  I get the error message, "This type of file is not supported, or the required codec is not installed" when trying to add the new GoPro 6 videos to Premiere.  I'm trying to add the videos by going through the Add Media, Files and Folders method with Premiere since the vids are now downloaded. I read a few posts about a "Handbrake" program, but don't currently have that installed.  The MP4 videos run fine on all Windows software, but I wasn't able to open it in Quicktime.  It opens fine in the GoPro Quik video editing software, but the reason I own Premiere is to edit videos.  I'm running windows 10 with a GEForce GTX 1060 video card if that matters and all software is up to date.  Thanks for any help you can provide.

Ik werk met Adobe Premiere Elements 18Mijn vraag:Als ik naar 'Met instructies' en daaronder de instructie 'Volop kleur' aanklik zie ik naEffecten openen de optie Het effect Donkerrood toepassen in de categorie Hollywood-looks.Donkerrood is in Hollywood-looks niet te vinden!!!Ik wil nl mijn hoofdpersoon rood maken en de achtergrond zwart/wit.Hoe ga ik te werk?Met vriendelijke groet,Ed Wennink[Here is the list of all Adobe forums... https://forums.adobe.com/welcome][Comments is to ask about the operation of the Forum, not a specific program][Moved from the Comments forum to the specific Program forum... Mod]

As a newcomer to video editing, I just downloaded PE 2018 trial and installed it.  The program opens in full screen mode on my pc but will not shrink when I grab a corner of the application .  The screen just flashes and it goes back to full screen.  This seems a bit of a basic problem - never experienced it before with any other app.Does anyone know what could be wrong?

I committed the unforgivable sin of moving some files after I had created my project...and now I can't edit it.  Other than starting from scratch, is there any way to salvage all my hours of work editing the clips, audio, etc...????And I wish I could remember what the file was before, but I can't.

Salve,chiedo un aiuto per questa questione: non mi fa modificare la "Modalità di montaggio".(allego foto della schermata)Grazie

Hi.  First time questioner.  I find that though I can select Bold and Italic together, it changes ALL words in the title or subtitle.  I would like to keep everything Bold, but only Italicize foreign words to show that they are foreign and not mispellings?  How do I do this?Thank you very much.

Hi,   The starting 15 seconds of my video chops off when I import it into adobe premier elements. When I run it outside it runs fine. Anybody knows what is going on?

Well, not really for me, but for a friend whom I may be prepared to help. This friend, in his early 70s, will be working very much at an amateur level. I've seen some of his work (quite amateurish), and I may be prepared to help improve them because the stories are interesting. I've spent 20 minutes looking at the overview of Elements, but have come away feeling it's not for him. I'm hoping I'm wrong.He's been using a thing called iskysoft (?) and it's a bit flakey in his estimation. It's probably just him, though.I'll help him if Elements has certain similarities to Premiere Pro (which I'm quite experienced with), and if all those automated aspects of Elements can be avoided. So these are my questions, with regard to how similar is Elements to the Pro.Q1: Does elements offer several timelines for both video and audio?Q2: Can a user manually import files into a holding area?Q3: Can transitions be manually applied to video and audio files?Q4: Are imported files stored with the project,

I'm evaluating Adobe Premiere Elements 2018 and I want to do a simple audio crossfade between two clips like discriped in the documentation in the expert mode.But I can'rt place the transition manually in the center between the clips. It can be placed only either at the end of the first or the beginning of the second clip, it will not drop in the center.Even if I manually change the position via the popup to "center" it will not align.The same happens if I apply the standard transition to the entire track, all will be placed on the beginning of the right clip.In my example I use the quick time video format (h264) from my camera, but it will not work with other containers like mp4 as well.* it's a fresh install * restarting does not solve anything* using the other audio transition has the same problem* the video transition can be placed between the clips* it does not matter whether the transition is 1 or 2 seconds* the example clips are app. 20 seconds and one minute; but again it does

I produced a movie in Premiere Elements 15 and when I try to burn it to a DVD it produces an ISO file in my PC. How do I burn the ISO onto a DVD that will play on a DVD player and not just on my computer?

I recently purchased Premier Elements 2018 and I'm attempting to add several videos from my Samsing S8 to a project and export to a file with them all in the same mp4 video.I've tried exporting the video in every format up to 4K but the quality is always poorer than the original video. Could someone please tell me what settings I can use so that the output has the same nice clear quality that the original files have ?

I am trying to add narration to my video project. I have the editing in advanced mode and all the video and audio from my gopro comes through fine.I went through tutorials to find out how to "turn on" the microphone option for the program, and I plugged in the microphone to my desktop computer.I hit tools and narration and started talking then hit stop. I file went into my "project assets" and I moved it onto the time line (in the audio narration track)But it is way to soft. I can just hear that there was something recorded but I can not get the volume up.I tried increasing the volume at the microphone pop up box and I tried increasing the "yellow rubber band" on the audio track neither did anything to the volume.Can anyone tell me what I am doing wrong or make a suggestion? Thank you

Hi can someone please help me, im trying to edit a video and once i insert all my video files in to the program I highlight all the file and press to render them all and every time it just plays the whole project and doesnt render them, all files im using are filmed on a lumix dslr at 1080p and also when i try to use files from my phone iphone 7 it will not render them as well. please someone help resolve this because i dont want to have just wasted £130 on elements 2018 and have to buy premiere pro now i havnt had a chance to use this program yet!

I am working on a MacBook Pro and trying to save a project into a Window Media Player Friendly file.   Is there a way I can do this, without jumping out a window.Thanks in advance

i have this weird issue where I used this program for a year or so. but one day it asked out of the blue my serial number in a pop up-window, didn't think much of it, and kept editing like normal. but the next time i reopend premiere and loaded my project, the same window popped up. but this time i couldn't get around this, so I filled in my serial number, then it just closed, and the same window popped up again! so now i can't license the software anymore, and i can only use the trail version.i tried reinstalling it but that didn't help either.

Was working ok now a message saying "codec required" have tried reinstalling but still asking for Codec

Hi all, I continue to have a few instances on my latest project timeline, where there is about half a second or so of black, even when using a transition effect, and my video clips are snug against each other in my timeline. Anyone know the fix for this, as I feel it is a fairly common editing problem in Premiere Elements, I just haven't seen an answer that works for me yet. Screen shot attached

Hallo community,Habe da mal ne Frage: wie komme ich an den Schlüssel, um die mpeg komponente zu aktivieren?  Das vorgeschlagene Prozedere funktioniert nicht.Die Webseite wird nicht gefunden. Bin mit PE nicht sonderlich vertraut.Danke schon mal Joachim

I have been working on two large projects in Premiere Elements 14 for several months. They are, agonisingly, not finished. Suddenly from a few days ago when I try to add a new file using 'add media' files/ folders the file does not appear in elements organiser. I have retested the process umpteen times. When I close Premiere and re-open it I get the error message that it has failed to open the catalog and that it is corrupt or out of date and can't be updated.If I try to create a new album I get the error message "Error creating new album". No new album.If I try to delete any file from the Organiser I get the error message "Error deleting media" and the media is not deleted. (I had hoped that if I deleted recent files that might help.)I have tried uninstalling and reinstalling Premiere Elements 14. Curiously when I did this when I opened Premiere I got the same error message about it failing to open the catalog but when I opened a new project I was able to add a new file and the Organi

Is there a way to make a slideshow that automatically pauses at each slide?  Like the slideshows that were done with slide projectors and 35mm film.Thanks

While using PE 11 on windows 10 os  the video and audio pauses/freezes after a second or two. Pressing play again gives same result 

I can can create a .mov file of my MiniDV tapes in PP (DV/DVCPRO - NTSC, Linear PCM, Timecode. SD 6-1-6).  Can I do so, somehow in PE 2018.  I can't afford PP in CC.

HiI've had Premiere Elements 18 on my machine for about 3 months and it's been absolutely fine until a couple of days ago.The problem now is that playback in the time line goes all choppy once I start trimming and deleting parts of the clip. However the clip plays smooth until I start the trimming etc.I've tried uninstalling and reinstalling PRE but that hasn't made any difference.A few days ago I installed Lightworks and then uninstalled it again - could this have been the problem? Does anyone know how to fix this?ThanksJonathan

Hello, I have made several videos now in Adobe Premiere Elements and all of them have this same issue.I can start a new project, import, edit and export project. But if I do not finish it in one sitting ; if I save it and close the program, upon reloading the program it will not re open I have tried all of my back up's and the auto saves, I continue to get the error - a unknown error occurred while opening the project. I have the slightest idea of what to do . Thanks for any help.