Premiere Elements

Using Premier Elements 14, all the latest updates are installed.I am trying to add an mp3 to a premier elements 14 project, a file that I recorded, and when I place the track into the editor and hit play, no audio is created; if i double click the file, i can play it and it also plays in iTunes and Groove. I have made a small video showing ( view the video)  this exact issue, any ideas on how to fix this?

I discovered recently this when I edited my first 4K video (I previously worked with HD video).  With HD, my titles were typically in 64-72 point Ariel font, which looked fine on the screen.  However, when I moved to 4K video, the 72 point titles were tiny and had to double the point size to make them comparable with HD. At first I thought this was a bug, but then read in the online Help,“The physical size of the font depends on the resolution of the image. A capital letter in 72‑point text is approximately 1‑inch high in an image that is 72 ppi. Higher resolutions reduce a given text point size because the pixels are packed more tightly in higher resolution images.”Apparently PrE was designed this way.  Regardless, does anyone know why?  To me, it would be much more user friendly if font size were relative to the total image rather than the number of pixels.  For example, a font size of 100 might represent 10% of the vertical image dimension, regardless of th

I am a fairly new user with Elements 15. I am trying to preserve some old family footage taken on VHS in 1988! This has been copied to DVD via a DVD recorder. I have imported the VOB files and edited the footage in Elements. However, on exporting, movement is very jerky. I have tried exporting every format - AVI, MP4, MPEG etc. On looking through other advice I have applied Flicker removal, which gives the best result yet, but still nowhere near as good as the original.When the files were initially imported, I got a "generic error message" but no details, and the clips looked OK on screen. Are there particular settings I need to apply for VOB files?

I have been using PE 12 expert mode for years.  When I drag my audio clip from project assets to my timeline to edit, the clip shows up as a green rectangular clip but I cannot see the audio waves inside the clip to edit.  The audio will still play, but the clip is an empty green clip and can't see audio to edit!  This is my first time on a forum, can someone please help?  I am working on a project must be finished asap, thank you!

Trying to get elements 13 to work prop;erly is getting frustrating.When I move (for example) from elive to media in organizer it takes for ever.  It seems to take forever to bring up resources also.I have a GB network here with multiple computers and 2 1GB switches to my Netgear quad router with 3 bands  .  The power computer has 32GB ram, 1TB of available storage in the computer drives, 8TB storage in my cloud drives, Intel 7 quad processor, Nvidia graphics card with the latest firmware loaded.I have Elements 13.1 installed.So, why is Elements 13 so slow  and is it fixable?  It borders on not wanting to use it.Alan

Hello, all.  Long time APE user but only recently getting more in-depth.Am wondering if it's possible to check the 'exposure' of my clips, either in APE or via Plug-in.Ideally this would be waveform scopes, but I'd be happy with clipping information, and maybemidtone levels?  Figured I'd try to push my luck while I was here. APE 15, Windows 10-64b.Thanks!

Hi,Trying for ages to create the prov file for Premiere Elements 12, keep getting error code 14, tried at work, at home of different computers same issue.Command: C:\Program Files (x86)\Common Files\Adobe\OOBE\PDApp\Enterprise\utilities\APTEE\CS6\adobe_prtk.exe --tool=VolumeSerialize --generate --serial=(myserial) --leid=V7{}PremiereElements-EMT[12]-Win-GM --regsuppress=ss --EulaSuppressHere is the log file. what am i doing wrong?2017-02-07 21:18:22 [3340]  Adobe PRTK: *** Adobe PRTK tool START ***2017-02-07 21:18:22 [3340]  Adobe PRTK: Adobe PRTK tool VolumeSerialize invoked2017-02-07 21:18:22 [3340]  Adobe PRTK: .2017-02-07 21:18:22 [3340]  Adobe PRTK: creating  .\prov.xml2017-02-07 21:18:22 [3340]  OOBELib: __OOBELIB_LOG_FILE__2017-02-07 21:18:22 [3340]  OOBELib: *************OOBELib Session Starts*************2017-02-07 21:18:22 [3340]  OOBELib: Version 6.2.0.43,6.22017-02-07 21:18:22 [3340]  PCDService: PCD Service in non-threaded mode2

I use Adobe Premiere Elements 13 on a Windows 10 (medium-to-high end) PC and once I add a certain number of text titles per session (usually 3 to 10 titles) the program sort of freezes on me. As in, I can move the slider, and save my progress (thankfully) but the video refuses to play, and the slider moving atop audio doesn't play said audio as I expect it to. This has been happening ever since I switched from 12 to 13, and I'd like at least a reason why this keeps happening.

I have been watching tutorials on premiere elements 12 and notice that when they click the applied effects tab there is a little time line there to help with adjustments. This does not show on my adobe for some reason. I have to use the main timeline for all my effects. Does anyone know how to make this show up

Can't open Premier.  Hangs during splash screen.Windows 7, SP1  - 64 bitAMD II X4 630 2.80 GHz6.0 GB RAMError log:Log Name:      ApplicationSource:        Application ErrorDate:          2/6/2017 11:40:03 AMEvent ID:      1000Task Category: (100)Level:         ErrorKeywords:      ClassicUser:          N/AComputer:      jane-HPDescription:Faulting application name: PhotoshopElementsOrganizer.exe, version: 15.0.0.0, time stamp: 0x57cd427eFaulting module name: dvamarshal.dll, version: 8.0.0.0, time stamp: 0x535f7c68Exception code: 0xc0000005Fault offset: 0x000000000000ab79Faulting process id: 0x994Faulting application start time: 0x01d280978a64e212Faulting application path: C:\Program Files\Adobe\Elements 15 Organizer\

Hi I'm a photographer and have photoshop cs5. I wanted to create marketing videos, with images to music. Do you think adobe elements is best for this?

My videos were working just fine for works and then for no reason I am now getting the following message: "This type of file is not supported or the required codec is not installed". I can't figure out how to fix this.

im running premiere 14 (i also have photoshop and organizer).  i'm uploading pictures from my dslr *see below for picute size" onto my timeline along with hd video. The pictures are zoomed in when i upload them.  I'm pretty sure that the pixels are the problem but i'm not entirely sure how to fix the problem so i can see the whole picture instead of only 25% of the picture.  The pictures i'm importing are:  dimensions-6000x4000pixels resolution-300dpi bit depth-24my system specs:windows 10 home version 1607 64 bitintel i7-6820hk 2.70GHz     16 Gb Ramnvidia geforce gtx 1080i searched the adobe premiere forums and couldn't find anything about this particular issue after searching for several hours.  Felt it might be better to just ask here instead.  I did ask on reddit and one person said that there is no way for me to use those photos in premiere elements 14.....kind of a bummer since i'm 40 and that's probably the only time i'll go to D

I successfully created several Blu-ray iso files about 80 minutes in length using Pre 14. I then ran into a problem on another similar project. I was creating a Blu-ray iso file on a video about 120 minutes in length. The burning progress bar shifted from encoding media to compiling media at 98% after a few minutes the word Error appeared below the progress bar which then read 0% and never made any more progress. I restarted the computer and tried again and it worked. The next similar project then had the Error, however, restarting the computer didn't solve the problem. I uninstalled and reinstalled Pre 14, but the problem persisted. I then purchased and installed Pre 15 but the problem persisted. I then tried exporting the video as an AVCHD file and then use in a new project which worked a couple times but is not getting the Error. Here are the particulars of the projects.1. Import HH video (1920x1080 30 fps) that was shot on my camcorder and uploaded to a hard drive and then imported

What should I do to Change the soundtrack from silent to non-silent? I´ve tryed to adjust the settings "show/hide track", but it doesn´t help.The setting at the soundtrack is "Silent track export without sound" anyway.

What video camera is most compatible with Premiere Elements? I've used Sony in the past, but are the new cameras as compatible? I'm specifically looking at Handy Cam AX33 4K or Handy Cam AX53 4K. I've heard 4K's have issues with some software. Thank you!!

I want to buy this, but it needs to work with AVI files or I cant spend the money,I tried the demo.. but I get the error codex missingany ideas?help!GrumpyEDIT   I am trying to import Sims 4 video shot ingame

I'm running Windows 10, and obviously Premiere 15, I don't know what other information would be relevant.So, after working on my project for five hours and then some, I was screen capturing a specific frame of the project, finished without issue, attempted to resize my Premiere window, and accidentally grabbed the window for my narration tool. Without realizing the issue, I took my workspace back to my primary monitor and attempted to finish the project. Upon review, I found that ALL of my narration had gone mute. The clips are still there, they still have the equalizer marks indicating that there is audio there, but when I play them, I hear nothing. The other audio works just fine.I've attempted to restart the program, load the project I finished before I started this one(that one has no issue).I also attempted to simply restart the entire project, but even new narration clips are mute, with the marks to show that there is audio there. I muted and unmuted the narration line in the wor

Hi,I bought Premiere Elements in May 2015 and all worked perfectly. Then recently it kept prompting me to update, so I ran teh update today and now it wont open at all. How can I get it to work again?I have the serial number from when I registered it. Can you re-send me the download link so I can un install completely adn re-install? Or is there a better way?Please help I use it daily for work<Serial removed by moderator: Please only disclose your serial in private >

I want to edit clips out of a home movie I have edited before (and will do again).  I put the DVD in drive but  Premiere 14 tells me there is an error because the file already exists in such and such a place.  Well, I sure can't find it.  And really, so what if it does exist? And if it does exist ,  then it should let me get it from where it exists!  Is there a way to find it somewhere else and delete it there?Thanks

I've had Premiere Elements 9 for a while now and never had any problems opening up .mod files (which is what my camcorder, a Canon FS200 uses) until I got this new computer. The new computer uses Windows 10, so I don't know if that's the problem? It's very frustrating, at any rate. Every time I go to add my videos to a project, I get an error that says "This type of file is not supported, or the required codec is not installed." I'm attaching a screenshot so you can see what I mean. I've been at it for hours trying to figure out what to do!

I've been using Premiere Elements 15 and until a few days ago it worked fine. Since yesterday I have problems with video capture through video grabber of Pinnacle (710 USB) or that Polaris, which previously have always allowed acquisitions of perfect clip. Now it happens that the acquisition of the video on the timeline takes place regularly, but the audio track inexplicably is captured only partially (example: track 1, 32 minutes-audio only 57 seconds). Strange. Could you tell me what happened? Thank you

HiI have just purchased Adobe Premiere Elements 15 (I have had both 11 and 13) and I am trying to get to grips with the organizer after not so good attempts in previous versions.In my organizer I have three catalogues but I am finding that I sometimes require a clip from one of the other Catalogues but I am requested to close the video editor before I can enter the catalogue manager to get into one of my other catalogues.I am aware that I can close and save my work in the video editor, change the catalogue and the reopen the video editor. If it’s just one clip, I then have to go through the process again to revert back.Is there an easier way please?Arthur

Wer hat hilfreiche Tipps wie eine erstellte und gespeicherte diashow sich am besten abspielen lässt

Hello,Does anyone know where on my PC the templates are wich I downloaded from Adobe?MichaelEDIT [moved to correct product forum – moderator][Here is a list of all Adobe Communities https://forums.adobe.com/welcome]