Premiere Elements

I know this may sound odd but I have a video that I have been trying to edit but every time I put it into P.E. 14 it changes the video completely. I'm dead serious. I'll explain and then link to a video on YouTube showing what is happening. I'm ready to go beserk on this thing because it has been doing this a lot recently. Anyways here's how it changes it. Within the first :45 of the video the intro repeats twice and then it cuts ahead in the video but the audio stays the same. I know it makes no sense, but anyways, when I look at the end of the video at around 3:35 it no longer contains my outro; instead it contains audio from what should be about thirty seconds before that.I know this may sound confusing but it really is happening. I have tried restarting adobe and my computer to no avail, I have updated adobe P.E. as well. I am using a video I only have one of in my computer so the source video and the clip I'm trying to edit are the same file, so this should not happen at all. I am

Adobe Photoshop Element 6 Adobe Premiere Element 4PROBLEM Adobe Premier Element 4you can not use this product at this time. you must uninstalling and reinstall this product or contact your it administrator or contact Adobe

AND I CANT FIND A COMPETENT PERSON ON THE END OF A PHONE LINE TO TALK TO AT ADOBE. IS THIS SOFTWARE A MISTAKE TO BUY OR IS THERE ACTUAL SUPPORT OUT HERE SOMEWHERE. JUST AN ERROR THEN ADOBE CLOSES WHEN I TRY TO UPLOAD TO YOUTUBE... WHY?

I can't find the supported formats listed anywhere

Hi, I just recently built a new computer and am not able to open my editor. I bought this software about a year ago and used it on my laptop flawlessly when switching, however, the software no longer opens.These are my system specs:Windows 10 64 bit1 TB WD 7200 RPM HDDNVIDIA GeForce GTX 1070 8gb GDDR32 GB DDR4 3250 Corsair Dominator Platinum RAMCorsair H100i liquid coolingIntel i7 6700k 4.0GHz TP-Link Wireless CardAsus Sabertooth Z170sWhat I have already done:About three times now I have re-installed the software,  each time putting in the product key and it installs easily. Once I open the software, it loads for about a minute and then stops. It is at the screen (where it won't pass) with the choice of editor and organizer.Thanks for all the help,Chris

​[Here is the list of all Adobe forums... https://forums.adobe.com/welcome][Moved from Comments forum to specific Program forum... Mod]

PE14.1 on a WIN7 PC...Sometime at the end of a video I add a number of photos (also using pan-and-zoom).After last video clip & before first photo I have often inserted a Graphic (Miscellaneous)called Road_Map into the timeline and placed a title text over this on video 2.This has worked fine on HD videos - now I've gone back to edit some pretty old (2012!) .avi videos.However, when I insert the same graphic into the time line I only see a small portion rather than the whole graphic as I did on the HD video:I assume this has to do with the lower resolution of this non-HD video.  The Frame Size of the project is 720 by 576.I have not been able to find a way to shrink the graphic - is there a way?

About a week ago I inquired about converting a Photo story project and Steve replied and told me just to import the windows movie file into Premier Elements and produce it in Adobe, but to make sure my resolution matched. I have done that, however before burning it I was able to find some information regarding the DVD player that I want it to play on. The specs are as follows:Insignia Player Model NS-BRDVD3Uses the following discs for burningDVD RW:  Files, Mp3, WMA, JPEG, BETA CDDVD-R: Finalized in VR mode only, standard version 2.0So now my question/dilemma is when I import the pictures onto the video line they import as a WMV file not as jpegs, however originally they were all jpeg files, my audio files I can change to Mp3 so they are not the problem.   I want to burn it on a Verbatim DVD-R data life plus disc, but don't know about the "finalized in VR mode only Standard version 2.0" Do I need to redo the project in adobe premier elements and make all of my video line

When I import clips in elements 15 I have audio lag other apps work OK with these clips and  other mp4 clips work OK in elements The clips are shot on a cannon camcorder in the highest res 50fps 1080 etc , they play OK on media players and work on other video editing apps

Quand j'ouvre l'organiseur il me demande de mettre à jour la version. Si je le fais j'ai  chaque fois la réponse suivante:"Mise à jour Photoshop Elements 14.1Une erreur s'est produite lors de l'installation de cette mise à jour. Quittez et réessayez ultérieurement. Code d’erreur : U44M1I210 "Si je regarde les versions lors du lancement j'ai pour:-Adobe element organizer 14 Version 14.1 (20151206.m.83730)-Adobe premier element 14 Version 14.1 '20151208.daily.895401)- Adobe photoshop élément 14 14.0 (20150827.m.80115)x64Même en suivant les instructions (Quittez et réessayez ultérieurement) j'ai toujours la même réponse.Mon PC est un Pavillon 23 de HP il tourne sous Windows 10 famille en version 1607 avec  6 GO de mémoire.Que puis-je faire?

Hi everyone,I've tried to find answers to my issue but couldn't get some.I've been using Premiere Elements for around 7-8 months now on Windows 10. Everything was alright. However, since I made the Windwos 10 Anniversary Update a few weeks ago, Premiere Elements 14 started to be vers slow... it's quite annoying for video editing. The video is not smooth at all and even the sound is bad.Does anyone have the same problem or have a tip?Thank you!Fred

I am using Windows 10 Home. I purchased the Photoshop Elements 15 and Premier Elements 15 bundle the end of November. After using the Shake Reduction function on a video (there is no Shake Stabilizer option) in both "quick" and "detailed", I got a red bar across the screen that reads: "To avoid extreme cropping set Framing to Stabilize Only or adjust other parameters". I do not see any option regarding Framing or Stabilizing. I am not sure what "other parameters" means. Where do I find this information?There is no online help for Elements 15 for this feature, and it looks like the shake reduction has changed since the last online tutorial information referring to Elements 13 and "Shake Stabilization". I would appreciate help in allowing me to use the shake reduction feature in Premier Elements 15 as it was intended. It was one of the reasons I upgraded from the Elements 8 bundle.

I'm trying to import a MP4 file from my home security system.  I can see that the file was imported into my video folder, but I'm getting the "importer reported generic error message and the guide will not let me proceed to the next step.  I'm using Windows 10 Home Edition with Adobe Premiere Elements 13.  As an aside, I really appreciate the forum here already. Without it, I wouldn't have been able to get by the "missing disk" pop-up...  It's been a little frustrating so far.  Any help is much appreciated...

Hallo zusammenIch habe vor einigen Monaten auf Windows 10 gewechselt. Seither mühe ich mit einer Fehlermeldung beim Start von Premiere Elements ab:"Ein nicht kompatibler Display-Treiber wurde erkannt. Aktualisieren Sie den Display-Treiber um eine .....Display Driver: Intel(R) Graphics 3000 3.0.0 Build 9.17.10.4229"Driver updaten hat nichts genützt. Ich kann die Meldung wegklicken, Premiere Elements wird geöffnet, blockiert aber anschliessend das ganzen System, so dass nur noch ein gewaltsames Abschalten hilft.Kann mir jemand einen tipp geben?DankeVelosophe

Hi,When I capture from my webcam, it only allows the file format to be QTKit which means the files I'm capturing are huge. I can't see anyway to change the file format it captures to. I really need the file sizes to be much much smaller when capturing from webcam. Any ideas how I can change this?I'm using PE-14 for Mac and using the built-in iSight webcam.Many thanks!

I have Premiere elements 13 on my computer and it used to work fine.  I launched Photoshop elements 13 fine, but when premiere starts to load up the editor is stops responding and crashes.  I've tried uninstalling and reinstalling, but it doesn't change.  I did previously have windows 7 when I installed the full elements package, but I tried a solution that I found regarding upgrading to windows 7, but that didn't work either.  I could keep looking through pages and pages of posts about solutions, but I don't have the time to do that, and I'd like to be able to use premier elements 13 because I don't have nearly enough money to upgrade to the newer 15.  Here are my system specs, if anyone can help it'd be much appreciated.

HelloI am trying to pull down the yellow sound bar to the right of the attached image so that it is at the same level as the yellow bar to the left.However, every time I pull it down it jumps back up.What am I doing wrong, please?Thank you.Steve

I organized a bunch of clips, dropped them the timeline and saved the project.Before I start editing, I want to see how long this movie will be with all my clips.  I don't see anything that tells me how long in minutes my movie will be?Also, the Render prompt keeps telling me to render.  What is this for.  Do I do this now, or when I am done with editing?Does Adobe Premiere make any changes to the original video clip files in any way as I am editing?I will want to export this to DVD when done to play on TV.Anything else on the checklist I should do to make a simple movie?Thanks!

Hello community,I'm trying to run Premiere Elements 12 on my PC with Windows 10 as OS.After starting I can choose between "Organizer" and "Videoeditor". Whilst running the organizer works out, i'm not able to run the videoeditor with the "new project"-choice.Any useful hints are highly appreciated.Kind regardsAttila_1913

while in export and share how do u preview the video to see the quality and what not. also how do I upload a video to google drive. It's 44 minutes long.

I'm working with Windows 10 Pro, processor is i-7 and memory has 8 GB so it shouldn't be the issue.  What I'm seeing is after installing the software, updating to to 13.1, the Photoshop Elements is working just fine but the Premiere Elements will go the startup screen with the eLive selected but when I go to the Quick/Guide/Expert it comes up with Adobe Premiere Elements 13 has stopped working.  I'm stuck there, looking for some help with this.I've tried getting Windows to update all of my software, it indicates everything is up to date.[Here is the list of all Adobe forums... https://forums.adobe.com/welcome][Moved from Photoshop Elements to Premiere Elements... Mod]

hi, where can i start a new conversation about premiere element 7 ? i'm lost , this is the first screen a found in the last 2 hours ......... help me please[Here is the list of all Adobe forums... https://forums.adobe.com/welcome]Premiere Elements Forum http://forums.adobe.com/community/premiere_elements

I have Premiere Elements activated on a desktop and a laptop... but my laptop has died and I can't de-activate it to activate on a new laptop. I have access to the hard drive, is there anything I can do within the files of the old hard drive to de-activate it? Thanks

Ich habe Premiere Elements 13 unter Windows 10. Ich kann mein  neues Projekt (das erste Projekt mit dieser Kombination) zwar ansehen, bearbeiten und speichern, aber nicht beenden. Wenn ich Datei beenden wähle, reagiert Premiere Elements nicht mehr.

!I recently installed Elements 15 after using 14 and other previous versions for a number of years.  I ran into something that I have not seen before and don't know if it is a bug or something that I am doing incorrectly.I am doing a video project and where I have two clips and am placing the second clip on top of the monitor that is displayed in the first clip.  In preview it looks fine.  I have highlighted it below:When I render it to a file using the basic HD 720 profile saving in either mpg or MP4 - H.264, the second video moves from where I had placed it. I don't think I am missing a step as I have done this with Premier Elements 14 several times and not noticed this.The final rendering is displayed here:Any help would be appreciated.