Premiere Elements

how to get rid of trial elements writing in the middle running through video

Hello,I've made a video in Premiere Elements 11 which includes still and moving images, sound and some titles. From this I've created an MPEG2 file using the preset for 'HDTV 1080p 25 High Quality' ie 1920x1080 25 fps PAL.  This works fine and is 4.18GB.The MPEG2 format is not suitable for running on tablets etc so I also made an MP4 file using the AVCHD preset for 'MP4-H264 1920x1080p 25'.  This also works fine but the file is 8.13GB, ie nearly twice as large which is not what I was expecting.For comparison I've used Handbrake to convert the 4.18GB MPEG2 file to MP4.  The result is a 2.45GB file without any appreciable loss of quality. This provides a solution but is time consuming and I would be grateful for any advice as why the Premiere high quality MP4 output is so large, and whether it is possible to create smaller MP4 files directly without sacrificing quality.Kind regards Mike

I am based in the UK and mostly watch video on PC, tablets and iPhones. I can't remember the last time I watched a DVD and not even sure I am able to burn on my PC.Can someone suggest what settings I should use for my Projects?John 

bonjour, j'utilise adobe elements 15 pour mes films de vacances et depuis cet été impossible d'ouvrir la section vidéo, message d'erreur ; error 87 , pilote d'affichage incompatible.tout fonctionnait bien depuis des années.merci

I just installed Elements 2023 and this is an upgrade from 2019. Look at the attached picture and why am I getting the preview being so distoredted ?  This happens with all the imported MP4 and .mov files. never had an issues like this with 2019.  Good thing I did not unintall that, right now this is unusable. Thinking a waste of Money if I cannot use it. This was also this way on a new file, an existing file, dleted video clips and added them back, it does not matter, every video, this problem, the imported .jpg preview okay.    So what is the fix to this problem?  Again Elements 2019 was and still is working just fine.  

I'm trying to render a 4K video of PC gameplay, however the bitrate I'm choosing to render at is not what it's *actually* rendering as.These are the settings I am choosing to render with:After the render is complete the file size comes out to approx 11GB, which equates to roughly 21Mbps bitrate. The game I am recording has lots of fast action sequences, so the lower bitrate causes the gameplay to look like it's 1080p which is a problem.Previously I used Premiere Elements 2019 (17.0) and using the exact same settings to render. It would come out to 44GB in size and look perfect. The downside was this version didn't support Hardware Encoding, therefore a 60 minute video would take 5-7 hours to render.I've tried the premade "4K Ultra HD" render under the "Computer" tab, and I've tried setting the Key Frame Distance to 1, both of which did not work. I changed the Level to 5.1, but this prevents me from doing a 3840x2160 aspect ratio. I've also tried changing the bitrate to 240Mbps, which h

Is it possible to slow down and speed up audio in Premiere Elements 2022? Its not under the effects i can apply and its not an option under tools. If i do time remapping on my video, i cant adjust the audio speed like i can the video speed. Unless im missing something. Any help would be awesome. 

Before editing videos I need to capture them from VHS and miniDV format.Is it easy to do it from Adobe Premiere Elements?What analog to digital converter device do you recommend to convert VHS to mp4?In the case of miniDV I have a Canon MV850i camera, will I be able to do it without a firewire card? The camera has (besides the DV) a miniUSB output as well as an AV (different from Sony).

I purchased the bundle pack of Premiere Elements 2022 and Photoshop Elements 2020 in July of 2022.  According to the Adobe Forum representatives, both products would run on my Macbook Air M2.  Sadly, they both were extremely laggy and slow.  Premiere couldn't even handle one video track of 1080p footage without stuttering.  Photoshop couldn't even do realtime adjusts of something simple like adjust brightness or contrast.  Both products should not have been sold or advertised as working with Apple Silicon.  They simply didn't work.  I was hanging on for an updated 2022 version that would actually work. Three months later, Adobe releases their 2023 versions of Elements and Photoshop.  Customer services is refusing to let me upgrade without paying an addition $120.  This is for software that NEVER WORKED in the first place.  This is nothing short of a scam.  I used Premiere Elements to painfully edit 2 short videos.  And Ph

Hello,I'm lost. I installed both Premiere Elements & Elements Organizer. I just left the default settings as is (Next...Next...Install...ect).Now I'm finding that something was uploading to my OneDrive and other files are loading to my local hard drive. My OneDrive is out of space. How do I move all the files from OneDrive to my Hard drive without breaking links? 

It would be a neat feature to have Elements recognize animal faces.  Maybe as a configurable option?

I'm having the same problem. I try exporting it as an mp4 at 720p, but it still has a black border around it. No-one seems to know how to fix it and I'm at my wits end now. I'm using Premiere Elements. I'll experiment with only using a video input at the same res (720p) and see if that 'mismatch' is the issue, as I'm making a compilation video made up of all sorts of video sizes. Some are 480p, 720, and I think there's one or two lower than that.   [Moderator note: moving from the Premiere Pro forum to the Premiere Elements forum for proper replies.]

I cannot apply shake reduction to video of my Samsung mobile?  Is this a preset issue?Using ver 2022 with windows ten

It looks really cool, but removes my narration but not the ambient sounds. Not working. What's wrong?

I have two tracks playing alongside each other.   I want one to be a lot quieter than the other.It seems impossible to do this in Adobe Premiere Elements 2019!! First I tried using the Audio Mixer to adjust the volume of the track I want to be quieter, to be something like 30 decibels quieter.    But whether I immediately save the project, or whether I play it back straight away, it doesn't make the change. Then I tried Window - Adjustments - Volume.    Again I set the volume level to be dozens of decibels quieter.  And I click SAVE straight away.   But it never, ever remembers this change.   It just plays it at the original very loud volume. What is going on?  Why does it always reset back to the original volume?  Why is it impossible to get this most basic task to work?

I'm adding /inserting photos and effects to the timeline. when I do the audio track and the music track splits and I can't detach them from the timeline with photos. the delete and close gap is greyed out. I've tried grouping and ungrouping in case the audio and photos are connected somehow. Please can someone help? I feel sure there is something simple I can do! thanks! attached pictures show everything is good, then a picture after I've inserted an image - the audio splits...have to admit I'm going crazy here !!

When I record a narration using Elements 11 I can hear my voice, delayed by a second or two, through the headphones.  I have tried muting the audio have checked all of the levels and setting both in elements and my sound card and this still happens.  If I try recording with anything else, such as windows sound recorder, this does not happen.Is there a setting I am missing somewhere as it is very distracting to hear yourself on a delay and makes the narration feature unusable.

Hi, a couple of months ago I upgraded from PSE '14 to '22. Used only the Organizer and Photoshop so far, everything works. Now I tried to edit a video and the welcome screen just shows a black screen. I googled the problem and tried a host of suggested solutions, to no avail. Can anyone help? Much appreciated! Some details:- the video is an MP4 from my Canon R6 camera, 4K/50fps. The manual says the camera records in either H.264 AVC or H.265 HVEC. Both should be compatible with PSE I guess- my operating system is Windows 10 and meets all the system requirements for PSE 2022- I have deleted all files from the Media cache I thought it could just be that 4K/50fps is a little too heavy for my (relatively) old HP laptop, so I imported another MP4 video which is just Full HD/25fps: same black screen. Tried a 4K video from my IPhone X: same.Here's two remarkable things:1. I can play all of the above mentioned videos in Elements Organizer without any problems2. When I import the 4K/5

I highlighted a clip --- hit Control H to rename the clip, but nothing happens. What might I be doing wrong?

I shot 20 distinct video clips of 2 minutes each — all in one video file. I've edited them and left space between them. The obvious export option is to delete all but one, export that clip, undo the deletion, then do the same for each clip. UGH. Is there a better way? Please? 🙂

Hallo, ich benutze  Adobe Premiere Elements 2023 unter Windows 11 zum ersten mal und bin noch dabei zu testen. Wenn ich nun einen Film von der Videokamera Canon HV20 über Firewire laden möchte und ich den Videoeditor starte, Medien hinzufügen auswähle und Videos von Kameras und Geräten anklicke ist die Quelle ausgegraut und ich kann nichts aswählen. Wenn ich das gleiche mit meinem alten Magix Video easy mache funktioniert es und ich kann den Film auf PC speichern. Sollte ich mal Premiere kaufen sollte diese Funktion aber gehen. Kann man da noch was einstellen, da ja zumindest die Funktion da ist sollte es ja auch gehen.

Ich möchte eine Animation mit Premiere Elements 2021 exportieren.   Egal, welchen Codec ich nehme, ich habe immer Treppchen im Bild. Vor allem am Boden. Wie schaffe ich es, das es gar nicht zu Treppchen kommt ?   Zusammengestellt habe ich es mit Cinema 4d und 720/576. In der Vorschau in Premiere ist noch alles Glatt, aber sobald ich es in Premiere exportiere habe ich grobe Treppchen.

About 1/2 of my clips are now 1/4 size.  The preview window shows the video in the top left 1/4 with the rest of the screen filled with lines extending from the 1/4 size video. 

Recently bought Premier Photoshop & Elements bundle 2023.  Two files in each zip.  PhotoshopElements2023MAC zip file had two dmg files - PhotoshopElements_2023_MacARMESD and PhotoshopElements_2023_MacIntelESD.  Which one is correct to be installed for Mac Air M1?  Thanks

Dit type bestand wordt niet ondersteund of de vereiste codec is niet geinstalleerd. Het zijn 3 JPG fotoos. Wat is er mis.