Questions

I've just gotten off a support chat and they informed me that my poor GPU performance in Premiere 2020 is due to the fact my card is not supported. I have the AORUS 1080ti Waterforce. I was then told that the GeForce GTX 1080ti IS supported.... I'm very confused how those are different.  Need some help here. 100% CPU load with 2% GPU utilization. 

I'm shopping for a Desktop PC primarily for photographic editing, but I anticipate doing video editing/production. So far I'm considering the following systems:(Lenovo ThinkCentre M920t - tower - Core i7 8700 3.2 GHz - 16 GB - SSD 512 GB).https://www.cdw.com/search/Computers/Workstations/?w=C1 Lenovo ThinkStation P330 (2nd Gen) - tower - Core i7 9700K 3.6 GHz - 16 GBPasted from <https://www.cdw.com/search/Computers/Workstations/?w=C1 I suspect that the graphic cards in both systems are not up to the task, but I would appreciate any advice conerning these PC's performance and especially what kid of graphics card I should specify at time of system purchase.

Would you guys think this pc is good and strong enough to run Adobe premiere pro without issues? I don't know much about PCs and idk how to build my own. Would appreciate any comments thank you all!    [Moderator note: moved to appropriate forum.]

I would like some help in deciding what to upgrade/purchase a new system to run Premiere & After effects.  Currently I have an i5 2 core 4 thread 2.7 i5-4570TE, 32 gig memory. GTX 1050ti 4gb graphics card, 2 500 gig hdd's 7200rpm's.   

Hi! I have a i7 7700 - with 32GB Ripjaws RAM and a GTX1060(running a 32" 4k BenQ display.) Rendering a simple cut video from perepere thats 5 min long at 1080p 60fps takes about 60 hours.I look at task manager, zero of GPU is used. I know there's been some similar threads about this and possible weaker CPU's but I feel like I should not have this issue... anything I can do?  

Hi, I am planning to buy a new laptop and found HP Spectre X360, Intel core i7- 1065G7 10th gen, 13-inch 4K UHD screen , RAM 16GB, Intel Iris Plus graphics, 1TB SSD and 32 GB Intel Optane. I was wondering if Intel Iris Plus graphics would work well with Adobe softwares such as Photoshop, Indesign, Illustrator, After Effects, and XD?

hi,  I have a question.  What computer is best for using Adobe Cloud.   Please advise.  Eric 

Help! I have done a ton of research and just can't pull the trigger on a purchase for a new monitor. The basic requirements are obvious as a designer — high resolution, 32-inch size or thereabouts, and good color accuracy. I need to be able to connect to my Macbook Pro. I want something that lasts and has clarity throughout the whole screen, doesn't flicker or get dead pixels after a month (per disappointing reviews, thus my pause to buy so far...). Anyone have one they totally love? Thanks!

I  have a Creative Cloud Photography plan and want to retain my images on both a Thunderbolt external hard drive and an external SSD. I travel away from home for a couple months each year and want to bring an exact copy of the Thunderbolt drive on the SSD for use while I'm away from home. It's much lighter to carry and I'm carrying too much stuff already. I use 'Super Duper' as backup software and a MacBook Pro for computer.. What I imagine doing is traveling with the SSD and adding to it as I photograph and also continue to work with my existing images. Then when I return home I can copy the SSD onto the Thunderbolt drive. I will then, on that day, have two drives with the identical contents. I can imagine some further refinement of my overall back up strategy.I converted to the new plan for Adobe in April 2018 and find my back up dated October 2017 appears to have a different file structure with the 2018 drive displaying the data under date headings with the 2017 drive displayin

I am assembling a computer with a Ryzen 5 3600x and 1TB NVME card. My old GTX 960 doesn't seem to run premiere pro, will a MSI GeForce RTX 2060 DirectX 12 RTX 2060 VENTUS XS 6G OC 6GB 192-Bit GDDR6 PCI Express 3.0 x16 HDCP Ready Video Card do the trick?

Hi,I am looking for a decent hardware for photo/video editing. Please advise.Following is my main spec.1. Intel i5 10th gen 10400 ( 6 core, 12 threads, 12 Mb cache, 2.9 ghz base frequency)2. 8 gb ram ddr43. 1 TB HDD (7200 rpm) + 256 GB SSD4. NVIDIA GTX 4GB 1660 (Ti or super) GPU gddr6 Some say that 9600k is better with 1660 GPU , some say i5 10400 maynot support gtx 1650 or 1660. But 9600k has no hyperthreading, so its 6 core, 6 thread with 9 m cache, and higher power of 95 W. (30 W more than i5 10400) How does it all depend on chassis power supply ?Is 260 watt psu enough for above spec ? Thanks in advance.

Hello,I'm looking for best option to buy.  Now I'm using INTEL HD Graphics 4600. Everything works well, but when I started to editing footage from drone, on preview have a lot of lagg. After 6 seconds of flow working it starts lagging.Looking for solutions to make my work more flow.Found this cards, similar price and want to choose one of this.Any sugesstions?NVIDIA GEFORCE GTX960 2048MB 2GBMSI GeForce GTX 960 GAMING 2GB GDDR5Gigabyte GeForce GTX 1050 Windforce OC 2GB GDDR5 NVIDIA GEFORCE GTX 760 3GB GDDR5 192-BITAll of them is around 180 usd.Thank You for help.

I'm looking to upgrade my graphics card to improve Adobe Premiere performance. Any advice on what I should consider in the £100-200 bracket? I don't use the PC for gaming, so just looking for a reasonably priced graphics card that plays well with Adobe CS and my current setup, for light personal use (HD, not 4K editing). SYSTEM SPECSGPU: AMD Radeon R5 430 (2GB GDDR5 @1150mhz)CPU: i7-7700 @3.60GHzHD: WD Green M.2 SSD (240GB / 50% free)RAM: 16GB (4x4GB 2400mhz DDR4)Small form factor desktop w/half height PCIeAdobe Premiere 2020 

My CPU is i7- 4790k. I want to upgrade graphic card only for smooth 4K video editing . Also I use after effects. Which graphic card should I upgrade? 1080 ti is compatible with i7-4790k? My current spec is Intel Core i7-4790K "Devil's Canyon" 4.4GHz Quad Core CPUArctic Freezer 7 Pro Rev2 Silent CPU Cooler.ASUS Z97 LGA 1150 ATX Intel Motherboard w/ USB 3.0, M.2, SATA ExpressIntegrated Gigabit Ethernet, HD AudioNvidia GTX 770 2GB GDDR5 Video Card (Certified for Adobe Premiere Pro CC 2014 and Adobe After Effects CC 2014)32GB (4x8GB) DDR3-1600 Dual Channel Memory.Drive 1: 512GB SATA3 SSD (for OS, programs, working projects)Drive 2: 1TB SATA3 Hard Drive (for storage of finished projects and other large files)24X DVD-RWInternal 802.11n Wi-Fi AdapterCorsair 200R ATX Mid Tower w/ USB 3.0Professional Cable Management Included.650W 80+ Certified Active PFC Continuous Power Supply.Windows 7 Professional x64 OEM w/ COA.USB 3.0 Bootable Recovery Drive.2 Year Limited Parts + Labor Warranty

RYZEN 7 2700MSI RX 570 8GB OC EDITION GPUMSI A320M MOBO500W PSU240GB SSD500GB HDD

Hi, I recently built a (very modest) editing/3d workstation pc:ryzen 7 2700 (all cores overclocked to 4.1GHz)32gb 3466MHz RAMGTX 1650 Super m.2 SSD as system drive (MyDigitalSSD BPXP 256GB)SATA SSD for various media (WD Blue 500GB) Bottom line: I'm trying to encode a 1080p (H.264) video with a very low bitrate (0.4 MB/s) and a very low sound quality - It's a reccording of a 4-hour online class that I'm trimming down, and with these settings it is only expected to be around 900MB.I set it to hardware encoding with 1 pass. While encoding, my CPU usage is ~15%~ and GPU is ~55%~. Memory is at about 10GB usage (out of 32GB)My SSD is writing at ~10 MB/s~ when I try software encoding the CPU constantly jumps between 20-80% and rendering time is 2x longer... Is the SSD bottlenecking the system due to multiple small writes it can't handle?  

Purchasing a laptop for college and I just need to be sure about it. How well would this one be able to handle Adobe CC 2019? The laptop Specs:CPU: Intel i7-4600u2 cores, 2.1GHz each; Turbo 2.7GHz dual and 3.3GHz single.RAM: 16GBGPU: Intel HD 4400Storage: 256GB SSD I'd rather be sure about this before I waste money on something that won't be much use. If theres better suggestions, I'd love to hear. On a budget too.

Hello, I am in need of purchasing a new computer as adobe recently stopped supporting the graphics card in my older dell laptop. Before buying something new (likely an older MacBook to work on for now) I wanted to make sure this problem didn't occur again for at least a while so I can save up for something newer. Will a 15" MacBook Pro 2013/14/15 still be supported for a while? As far as the graphics card goes, everywhere I look it just says "integrated GPU" with no specifics. So if possible, I'm also asking for any details on what is already installed. thank you!! 

I want to instal a gpu in my pc for after effect 4k60 fps video edting(animation). can anyone help to chose what gpu will be good enough for my currect config and is there any suggestion plz let me know ?  GPU bugget only $350 max. My PC Config: windows 10 Pro i5 7400 Western Digital Green 240GB SSD Toshiba 1TB HDD 7200RPM Ram Corsair Vengeance LPX (8*8)=16GB DDR4 2400 MHz I don't have gpu yet   [Moved to Video Hardware forum by mod]  

Hi guys,  Need some assistance from those who have more knowledge than me on Adobe Premiere and After effects. Please bear with me as i am quite at the beggining with Adobe (both premiere and after effects). I want to get a good base hardware for both Premiere and After Effects and i don't really have the base specs (beside adobe sys. requirements that are not that clear). So, in short i want to use Premiere and After effects in 4K mode. What hardware do i need ? My build is not made yet as i don't know what to choose these days.  Base hardware will be Z840 from HP - but this supports only Xeon !?! What CPU should i add? Intel i7/i9 vs Xeon E5? I assume that 4-6 core would be a minimum. It is better to have dual CPU or single ?  - i read that latest adobe versions benefit from higher clocks than number of cores. RAM: 32Gigs minimum (this is clear)Storage: 256GB SSD for OS + 1TB SSD for projects. Does it make sens to add HDDs as wel

Hello, I bought a Dell with an MX230 and was hoping to run Premiere Pro. I have looked up the drivers  mentioned in this forum on another thread and there is nothing between versions 442.74 and 445.87 in game ready drivers. The 442.92 that was suggested is only available as a a studio driver. I am a little confused as to what to use since the other thread said to use only a game ready driver as no studio drivers would work. I did post on that thread as well, but it is 6 months old so didn't know if I would get a reply. I haven't received the computer yet and am thinking about returning it. Does anyone have any advice about this machine being capable of running  PPro 2020? https://www.bestbuy.com/site/dell-inspiron-15-6-touch-screen-laptop-intel-core-i7-16gb-memory-512gb-...  

This may be one for Adobe Community Professionals ? - or anyone who has implemented/upgraded to the new Intel 10th generation CPU's in a Desktop.I'm currently using Intel 9900K overclocked and now editing most stuff  in 4K 25or 50fps.Using hybrid edit approach with ProRes 422 previews and generating final master in Pro Res 422.Some exports/features eg Warp stabiliser are very slow. Snail like.Machine runing all on latest Drivers and Intel Graphics Driver.I see no Adobe  info about any new efficiency drives to improve speed of Premiere Pro - just more feature stuff weighing it down.Can anyone enlighten me? - eg is it worth upgrading your CPU to these latest devices with Premiere Pro 14.x series yet , or just a waste of money ?.

Hi all,I've searched a lot of forums for the best Mac computer build and realized I just need to post a new question, the details are too specific for me to find out from random blogs/forums. My current build is:Mac Pro Late 2013 (trash can) 3.5 GHZ 6-core intel Xeon E532 GB DDR3 RamAMD Firepro D500 3072 MBMy company is looking to upgrade my computer to something a faster. My main work is complex after effects animations (think a large grid of HD videos playing and moving around on screen at the same time) as well as a lot of high res Element 3D work. My idea was to purchase an old 2011 Mac Pro tower from a reseller and have them fix it up to these specifications:2.93 GHz 6 core intel Xeon Westmere (12- core, 24 thread)64 GB DDR3 RamGTX 1080 8GB250GB SSD (~500MB/s)]Here's the link the resellers site if you want all the specifics: https://ibuildmacs.com/configurations/323828/ Specific questions I have are:1. Is this GPU fast enough to keep up with the GPU?2. Being an older 2011 build wi

this is my computer setting.I7-7820x36GB ramNivdia GTX960all my programs already up to date  

Hi Everyone, I hope that I posted my issue in the right place. I've a PC built with AMD Ryzen 3800X 8-Core Processor 3.89 GHs, 32 GB RAM and GTX 2070 Super GPU. My problem is that the regular & ram preview is too slow. I know that my PC is more than enough to handle AE because I use other 3D programs and they are working fine. I so other topicts with some tips to faster the preview but nothing helped me. One of the topics suggested that I enable the Multiprocessing option in the memory tab. However, I can't understand why I can't find this option! Is it an option available for Intel processorts only? Or there is another issue that I can't find it or solve it? Please I need your help ASAP. Regards,