Questions

Hi everyoneI need to produce a video for a 37888 px / 192 px LED screen.it's possible to split this screen in 3 area, so i have to do 3 vidéos in 12630 px / 192 pxbut does someone know which codec allows me to do this kind of huge resolution ???I only found codec for 8k maxThanks for your help !

Hi there,Hopefully someone can answer these questions for me? I'm using Premiere Pro, After Effects and Media Encoder and have to deliver to a client files with the following specs:- Wrapper:MXF op-1a Codec: XDCAM 50 mbps (Mpeg-2) 4:2:2 1920x1080 interlaced Framerate: 50 fps Audio: 16-20-24 bit 48 Khz -6dBFS Additional Requirements:1 minute of bars and tone 1KHz @ -6dBFS When I send the files to Media Encoder I can set a preset for the pictures (MXF op-1a XDCAM 50 mbps 4:2:2) without a problem however the test file I sent had audio levels all over the place. The timeline I exported my final edit from on Premiere had bars and tone set to 24 bit / 48 Khz -6dBFS... but the audio on the edit was all over the place when delivered from Media Encoder. My questions are... 1] When I create the my sequence in Premiere should I set the audio levels at 0 / zero and then adjust the final levels in Media Encoder? 2] If so ...where do I adjust my audio levels in Media Encoder...I don't seem to be ab

I've been having some issues lately with Premiere Pro and Media Encoder not using CPU properly.I'm having this issue on 2 macOS installs, Sierra 10.12.3 and High Sierra 10.13.6, the latter is a brand new install I did today.This issue is happening on all Premiere projects I'm currently working on.It usually goes like this, I send it to Media Encoder, hit render and it goes smootly, then, a few moments later, I send a new version to Media Encoder, hit render again and render time is 20 times more than the first time. On the last project it was 3 min vs 60 min.When it goes smootly, Media Encoder reports normal CPU usage, when it is slow, it shows around 20~25% of usage.Sometimes it works again after reopening Premiere and Media Encoder, sometimes only after a restart.I also have the same issues when trying to render in and out inside Premiere.I'm not doing anything fancy, 4K ProRes footage, Lumetri Color and a few imported titles created on After Effects.This started happening after upgr

Hi, I'm trying to batch watermark a folder of images using Encoder, however every time I apply a jpeg workflow with watermark overlay it exports my images as sequences (I get 100 copies of each image!). I just want one copy of each file, can anyone suggest a way to stop encoder exporting sequences, is this possible? Many thanks

Trying to create some lowish quality offline files with a alpha channel.  Tried Avid DNxHR LB (AME CC 12.0.1 windows) but did not get a alpha channel.  Cant work out what I have done wrong;(.  Don't mind using another format but this creates a 500MB file and ciniform on lowest quality created a 1.5GB file which is way to big (for a 50 second offline file).

Hi thereDoes anyone know what version of the Media Encoder one needs to be able to set the encoding setting for Audio R128?I have the Master Collection CS 6, but cannot find this setting.Is my version not able to or am I just not looking in the right spot?Thanks for helping! I really appreciate it!

Hello ! I got an issue with converting my after effect file into mp4. All my whites gone gray. As my mp4 have to be in a white structured webpage, you see a great difference between the white background of the webpage and the video. Of course I tried different settings but nothing gone right. When i convert to .mov whites are perfects, but when i try in mp4 in h264, it's awfull. But as a web page, I must convert to mp4.Got a soluce ?

Hi there,I am a composer, trying to encode DVD's of my past work so I can edit a showreel. I am having problems with some encoding some DVD's as for some reason, Adobe Media Encoder clearly states that there is 'no audio' on the clip, however there absolutely IS audio on the clip when I play it in VLC or Windows Media Player. I'm completely stumped. Have tried deleting cache, installing Premiere Pro trial edition, and tried encoding on two different computers, to no avail. On the tile before the show starts I do notice that it says 'Audio configuration - A1 Stereo Final Mix L / A2 Stereo Final Mix R / A3 Stereo Mix minus narration L / A4 Stereo Mix minus narration R.' Could that be the issue? That because there are more than the regular two channels of audio it's confusing AME?Thanks for your time, Alex

Never had this problem until I updated to 2018 versions.  When I try to add the file to the queue AME becomes unresponsive and I have to force quite the program.  Same thing happens in Premier when I try to import the footage.@ !

Okay so i've been using Adobe Premiere pro for the last two years and started using AME in the past year.This problem has only started the other night and I have no idea whyI do occasional youtube and recently I went to go Render my xcom 2 video, and on average my videos take 6-8 hours depending on length. Given that length be 20 mins - 60 mins.The current video is an hour and 20 mins long, with 4 tracks. two with audio, one for facecam, one for gameplay.I have a rx 480,  currently only have one card of memory in my PC but a stick of 8 gigs. currently in ( so i know times will or probably are longer than usual as i have my 2nd out rn)64 bit, win 10.My problem I am dealing with is in AME it starts off normally, my video says it'll take between 6-8 hours as it bounces. I leave home come back from work, or wake up and the remaining time is at 20 hours even though it's been rendering for 8-9 hours, and the seconds constantly slowly go up but in the preview window I can visually see th

I was attempting to only show a specific file format (mov vs R3D files that were in the same folder) and went to the directory viewer and clicked "file directory." Obviously this was a mistake and I should've gone to the "file types displayed" dropdown and chosen the correct format. Anyway, going back to the directory viewer dropdown, the RED option is now grayed out and I can't get it to come back. Using that option makes it so that the spanned out R3D clips automatically show as one file (as it should). Now it looks like it's 21 clips of the same joined clip with the same 49 minute length of time in the media encoder browser (but there are 21 spanned out clips in my mac finder folder).When I try to go to other folders that have spanned R3D clips in it, it works the way I want it to. It's just this one folder now having weird issues. Anyone know how to fix this?

So, looking at the stitch capabilities in media encoder, and have successfully stitched two videos together in the program, but was looking at saving presets and incorporating stitching, and don't see the option and my searches have been in vain.Basically, I'm making videos that need to go to facebook and youtube.  I want to just edit one timeline, but then send to media encoder and kick out a facebook version and a youtube version that will append (stich) on the endcard for the subscribe and related video overlay  endcard stuff youtube does.  Is this possible?  If I'm not clear, please tell me and I'll try to rephrase.

Hi all,Thanks for your support, I'm having huge issues with AME in my Lenovo Yoga 910.The laptop specs are:OS Name Microsoft Windows 10 HomeVersion 10.0.16299 Build 16299System Manufacturer LENOVOSystem Model 80VFSystem Type x64-based PCProcessor Intel(R) Core(TM) i7-7500U CPU @ 2.70GHz, 2904 Mhz, 2 Core(s), 4 Logical Processor(s)BIOS Version/Date LENOVO 2JCN39WW, 31/05/2017Installed Physical Memory (RAM) 16.0 GBMy Yoga 910-13IKB Laptop consistently crashes when using this specific software.The errors stated are usually:IRQL_NOT_LESS_OR_EQUALMEMORY_MANAGEMENTPAGE_FAULT_IN_NONPAGED_AREAAnd one more regarding a faulty driver (stated below).So far I've:Restored the system several times (through Lenovo's recovery drive).Checked SSD & RAM integrity (no issues found).Checked drivers (all up-to-date). Intel Smart Sound Technology (SST) OED was failing (BSOD above), but I got it to work by rolling back to a previous version (compatible with it's partner driver: Intel Smart Sound Technology

Everytime I press "Queue" in order to export my Premiere project onto Encore y get a crash. The program tells me that I have a "serious problem" and says I have to "Save project" before closing intself. What can be the problem?

HI GUYS, YOU KNOW HOW TO BUY AND INSTALL THE XDCAM CODEC FOR MEDIA ENCODER?BLESSINGS

When I open Adobe Flash Encoder it says. "Problem with video Capture Device please verify that the video capture device is working correctly and is not already in use" What exactly does this mean and can someone please help me out?

Every time I try and render I get a failed notification. When I click on the log info it's saying that I stopped the process. I'm not clicking anything, I have plenty of space on my hard drive, I closed down all other programs to improve memory. Still failing. Log info- - Source File: C:\Users\Jessica\AppData\Local\Temp\Untitled Project_AME\tmpAEtoAMEProject-Comp 11.aep - Output File: C:\Users\Jessica\AppData\Local\Temp\Untitled Project_AME\Comp 1.mp4 - Preset Used: Match Source - High bitrate - Video: 1280x720 (1.0), 29.97 fps, Progressive, 00;02;20;17 - Audio: AAC, 320 kbps, 48 kHz, Stereo - Bitrate: VBR, 1 pass, Target 10.00 Mbps, Max 12.00 Mbps - Encoding Time: 00:02:3110/06/2017 01:09:51 PM : Encoding Failed-------------------------------------The Operation was interrupted by user------------------------------------- - Source File: C:\Users\Jessica\AppData\Local\Temp\Untitled Project_AME\tmpAEtoAMEProject-Comp 11.aep - Output File: C:\Users\Jessica\AppData\Local\Temp\Untitled Proj

Shooting on P2 AVC-Intra 50 - using time of day time code (news  - camera starts and stops and has discontinuous time code).When STITCHING clips together,  lose all original time code - Stitched file begins at 0 - and continues on.Is there a way to preserve original time code in AME 2017 & beyond - and create a single file, i.e. stitch clips together.Also read hat PREMIERE has stitched clip feature, but I cannot find that.

I've been trying to export a bunch of different varriants of the same video (20+) so I'm trying to export them through Media Encoder from Premiere Pro CC 2018 to greatly speed things up. However, Every time I export, the LUTs I'm using don't export in the video. I HAVE moved the LUTs into the technical folder from the package contents of Media Encoder (as well as Premiere Pro) WHICH DID WORK! However, because of that, I don't have the dozens of LUTs readily available to me through the creative tab in the Lumetri Color effect in Premiere. I feel like it's either one or the other. Either I get Media Encoder to export with my LUTs but lose easy access to them, OR, I forget about Media Encoder and keep all my LUTs in the creative folder under Premiere's package content.Can someone help me!!!Sorry if that may be a little difficult to understand.(Both programs have been upgraded to the newest version)

Dear all, I have been downloading applepro res codec on my computer via apple  website : pro video formatI do have final cut, color, dvd studio pro installed on my computerI have premiere installed as well and It is impossible for me to open a sequence edited in apple pro res format on another computer.So, I downloaded the Pro res folder presets : "AME CS6 Additional Presets for ProRes" on here : http://www.adobe.com/support/downloads/detail.jsp?ftpID=541And I tried to import them in AME, impossible I always have this error message : ""Preset cannot be imported. No exporter found for this preset." i have no idea what to do next, I am just completely blocked and don't get why is that, please if someone has any idea, advices, tips for me. I am getting crazy here !Thanks in advance. Take care.

Quand j’exporte mes films construit à partir de fichier Sony 4K (mp4) 3840x1080 grâce à Adobe Média Encoder avec la configuration H264 et que je visionne le résultat sur moniteur PC ou TV HD, je rencontre un problème de fluidité concernant la vidéo.Pour remédier à ce problème je suis obligé de choisir une pré configuration MPEG 1920x1080 pour retrouver une bonne fluidité vidéo.Configuration de mon installation : Windows10 avec Intel Core i5 2500(3,3GHz) Carte graphique ASUS STRIX GTX950-DC2OC-2GD5 GAMING, RAM à 2x8 Go.Ce message a été modifié par : henry berge

Good afternoon I've updated Adobe Media Encounter to 2019 and unfortunately it's not exporting (I use Encounter for two applications to work together which would be Adobe Premiere and Dalet) channel 2 and I re-downgrade to 2018 came back working normally and I'm not finding one support contact so I can give more detail to correct this bug? The tests that I performed to make sure that it is Meet I have exported the separate videos both Premier and Dalet are exporting correctly with channel 2. Someone has this contact. If anyone has the solution of this bug please contact us at bssantos@recordtvrs.com.br Thank you. Graciously Bruno Santos

Hallo,beim rendern einer Datei von After Effects 2018 im Media Encoder 2018 wird immer nur ca 20-30% der CPU genutzt, weshalb das Exportieren immer seehhrrr lange dauert... (1080p 30fps, H.264)PC: i7 8700k @4,8GHz, MSI GTX 1080, MSI Z370 Gaming Pro, 16GB G.Skill DDR4 RAM, 256GB M.2 SSD, 4TB HDDBitte helft mit weiter, wie ich alle 6 Kerne auf 100% Last bekommen kann 😕😕

Hello everyone.  I write to ask for help about a problem that I have when exporting QT from Premiere through Encoder.  last week I update my suite to CC2018 and now every time I try to send a movie from premiere to export in Encoder the process fails. The log always reports the same error code: -2147287036.  The specs are: QuickTime, ProRes 422HQ, 1080p, 23,976fps, uncompress audio.  Same as the original media mean so it's not transcoding.Another symptom of the problem is that the error only occurs though the Encoder, if I export directly from Premiere it does so without any inconvenience. I already looked for the error code and I didn't find any information about it.I appreciate any help or information about it, I can't keep wasting time.Pablo S

My PPro sequences setting is 1920 x 1080 50fps progressive.What is the difference in resolution between the AME formats H624 (.mp4) and H624 Blu-ray (.m4v). I have no problems building in Encore using the former but as has been reported previously Encore gives me the Code 3 error (unable open .ves file) when using the latter.A pointer to some explanation (if it exists) would be greatly appreciated.Paul