Questions

In an effort to paste an audio clip into my current audio file (command + v), my finger accidentally pressed *possibly* option or control (I'm using a MacBook Pro & the latest version of Audition). As a result, the waveform in my file turned gray. I could not edit it in any way, nor could I paste the clip after multiple attempts. Does anyone know what happened?

I have good input signal, I can hear all my mics very well, the recording is being made and I can hear it playback perfectly. Why are my waveforms so small? They're almost non-existent. I'm guessing I'm missing something pretty simple here. But I'm just getting started, and I can't figure this out. Would be hard to edit this. Any help would be greatly appreciated.

I noticed this question has been asked several times, but I haven't found an answer that directly addresses the problem and offers a solution beyond "well why would anybody want to do that?" Adobe makes it clear as mud, and YouTube isn't much better. So I decided to solve the problem myself.After some trial and error, I finally found the method that works 100% of the time. It requires following these steps in this exact order:   1) Select the entire file. You must do this before you start recording 2) Start recording (Favorites > Start Recording Favorite...) 3) Perform the edit or effect you want to save 4) Stop recording & name your favorite.   Done! I've tested it repeatedly on different effects, and this is the way. Don't forget to undo the edit you just made to the entire file!   [Mod note: title changed so that it's obvious what it's about]

Is a ART USB MIX 4 compatible with Audition?

I have an MP4 clip on my timeline that both Audition and PRPro show\s an audio waveform for.  When I play that clip in the timeline no audio is played.   when I did an Edit/Extract files to mono the new mono audio tracks files play fine.  However, when I right clicked on the file in the Files panel in Audition and selected Extract Audio to New File, the extracted stereo file has a waveform, but again there is no audio when I click the play button.   I'm also including this in the PRPro forum because that is where I first discovered the problem.  However, In PR Pro if I right click on the clip, select Audio Channels, select "Left" in the Preview Media Source Channel, and click on the play arrow, the audio for that channel plays properly.  The right channel was never intended to have sound so no surprise it doesn't play.  I've used MP4 clips from this camera with no issues for the last 6 years, with this being the first clip this has ever

I am "mastering" an audio book and sometimes the narrator has these really scratchy/buzzy sounds that I can't get rid of.  I'm new to Audition, but I figured out how to highlight the problem and run it through the click/pop eliminator.  This works about 30% of the time.  I thought it was a spike in volume, but it isn't.  When I zoom in and look at the vocal curve, you can see that it's not smooth but very jagged.  Is there a way to fix this?  Here is a screen shot of a section that has been run through the pop eliminator but is still making that scratch sound.  Any advice would be so helpful! 

I just opened my adobe audition 2024 and everything had be reset to default settings. All the custom presets in my effects rack have disappeared, all the shortcuts have disappeared, my layout has changed. I didn't want this and I haven't done anything recently to make this happen. Is there a way I can restore it back to a previous state? This is beyond frustrating if I can't, since I would be losing a lot of stuff.

In Multitrack mode, we can set effects on the effects rack to apply to a specific clip, and effects to apply to a specific track. I was wondering which set of effects gets applied first during playback, the clip effects or the track effects?E.g. if I have a De-Esser in a clip's Clip Effects and a Parametric EQ in track effects on the same track which my clip is placed in, does the De-Esser get applied before the Parametric EQ or vice versa?

Can I stop the automatic generation of .pkf files when I record in Audition? Or can they be directed to go to a different folder from the .WAV files of my tracks?

I'm using Audition 2024 from Creative Cloud suite. I think that's the version (it's 2024 right now and I'm using the latest Audition). I'm trying to burn a CD from a live performance, so it's one long audio file that I have added markers for start and end and set as CD Tracks. When I create a New CD Layout I cannot add the tracks using the markers because you can never see the CD Layout panel (where you drag and drop the tacks) whenever the File is selected. I can drag the entire audio file into the CD Layout Panel, but that doesn't separate the tracks nor can I see the CD Track Markers. I have also right-clicked on a track and "add to CD Layout" and that doesn't work either. I have read and watched tutorials and they all say select the File from the Files menu with the CD Layout Panel open and drag files or markers into the CD Layout Panel. They've all been using older versions of Audition by the way. I don't know if this is related, but I was able to make ano

Hi All,To elaborate a bit more, it seems that Adobe Audition picks up noise about half a second or so before I actually hit the record button. It always picks up the mouse click when I hit the record button, but if I'm even talking right before hitting record it picks that up too.Any idea why Adobe Audition picks up about a half second or so of audio before I even hit the record button and how to stop this? I'm using an El Gato Wave:3 microphone and I closed the Elgato Wave Link software in case that was interfering, but it didn't help.Appreciate any help or suggestions!

I am using Audition version 25.3, with a Mac Studio and a Yeti Blue stereo mic.  I am trying to record a voice-over for a short video. I've tried recording in mono and stereo, but either way, it only plays back in one ear or speaker. I've checked hardware mapping (last setting attached), and checked hardware config (attached). I've converted to mono and dropped to the left channel. I've recorded it in mono and tried to convert it to stereo, but I still only get sound in the right channel.   Every time I make a change, I close out completely and restart.  I get sound in stereo when playing iTunes or with Premiere, not Audition. What am I doing wrong? 

I am relly disappointed in Adobe.  I bought a new computer with specifications to meet the requirements to download after I was not able to use it on my old laptop and I still am unable to download/use Audition.  When I attempt to cancel the subscription, I am not permitted to do so without paying an astronomical amount.  BOOOOOOO, Adobe.  I only want to use Audition and now I am paying over $22 monthly for NOTHING. 

The title says it all, I am trying to finish work but I am always getting this kind of problems... one day the EQ isn't working another day you apply the effects and when you check the saved file nothing is there...It's an absolute shame that Adobe releases the new versions on the CC with this kind of bugs... I have clients and deadlines and Adobe CC is simply not reliable... Did anyone experience the same problems? 

Hi, everyone - yesterday my audio set-up was recording just fine. Today, I went to record an audition and when I played it back, there is a weird static and crackling happening. I know it's not a hardware issue because I tried a different cable, different mic and by-passed the audio interface with a USB cable. Also, when I record in any other program, the audio is just fine. In fact, I recorded in Quicktime Player and it was fine but it had static when I played the same file into Audition. I even edited that file in Audition - the crackle/static was heard when playing it in Audition but not when I played it in QuickTime. I know Adobe issued an update yesterday. Is anyone experiencing this? I am on a Mac Pro, Sequoia 15.3.2.

Does Adobe plan to bring an ARM version of Adobe Audition to the new Windows Snapdragon X Elite computers? If so, when?

I have been trying to use Enhance for the last 4 hours and is not working... this morning it was working fine. It uploads the file then says enhancing audio, but then gets stuck and never completes the task. Anyone know whats going on? 

How open file ".ses" from Adobe Audition 2014 ? ...older program files? 😞

Help! What happened to Music loops and beds for Audition? All I can find is this below:Sound Effects - 27 bundles, over 10,000 high-quality sound effects I need music loops to create songs, NOT a bunch of sound effects, anyone have a clue??Thanks Kelly K.

Hello Family,I am the host of a radio show and have been using adobe audition to edit my shows, but now when I export my shows they have 30 seconds of silence at the end of the clip. Would anyone know how to fix that? Thank you. P.S. I also make Gospel DJ drops that are usually around 15 to 20 seconds longand I have tried using export selection when exported my dj drops and the silence at the end is even longer. Example: A 10 second dj drop will have about 40 seconds of silence at the end. Any help is appreicated. God Bless youPastor Dre

Buenas, el caso es que he tenido que reinstalar el sistema operativo Catalina de nuevo (es el último que me deja instalar en mi iMac) y a la hora de volver a instalar el audition no me deja instalar la última versión por incompatibilidad con el sistema operativo, ¿donde puedo acceder a descargarme la versión 22.5 de Audition?Es la que tenía funcionando. Gracias de antemano  

I'm having an issue with Adobe Audition/Focusrite solo, that I'm hoping someone might a have solution for. I have a VO setup where I'm using a Focusrite solo interface, Audition as my DAW, and a Roswell K87 condenser mic. When I monitor or record to Audition, the input signal is automatically being clipped/limited at -3db regardless of how high I run the gain up on the solo. 0db +1db, etc. This happens with any mic I use. I also notice If I disconnect the solo, and the computer’s internal mic is on, the signal can run higher than 0db without being clipped, so I'm thinking it may be a setting/issue in Audition, but I can't figure it out. Has anyone else ever encountered this?

I'm getting no audio playback. I have a Shure SM7DB plugged into a Focusrite Scarlett Solo for my input. I also have a Schiit Magni Unity as a DAC/AMP for my headphones/audio output. My audio hardware settings are ASIO with my Scarlett selected, seems to record just fine. I just can't hear it when I try to play it back. There is no option to configure my output in audio hardware settings when using ASIO. Is it not possible to have input and output on separate interfaces when using ASIO?

Greetings...I am trying to figure out how to change the BPM to drum loops that I have bought from another company other than Adobe.  I am using the current version.  In the older version of Audition, it was very easy.  You use to be able to go to the bottom of the right hand screen, where it would display BPM and simply just change it my desired number.  Adobe thought it was too simple so they did away with that!  Now it says go Properties on the left hand side and display the BPM.  I changed the number on it and it still will not change the drum track.  It will allow me to change the metrodome, but the drum file will not to change its BPM.  The second, is to STRETCH the actual file.  IT WILL not do that method either.  Will someone please help me?  I am willing to pay to a reputable person.  Thanks.

Checked other posts, no joy.  I'm trying to record voice in mono via waveform, using Audient iD4, never previous probs but not used for a few months.  When I start new file and hit record, my green levels bar at the bottom shows that sound is being received as I speak, but no waveform appears on main screen and nothing is recorded.  All appears to be plugged in, input levels as usual, totally stuck and can't record.  Help!  PS  I'm very non-techie, just read books (audio narration) for charity, never music, so please speak to me as a dummy! Thanks, Kate