Questions

I know that this issue has been addressed in the past, and it's sounded like there haven't been any solutions. But in case anyone has stumbled upon something that works, please let me know ... I installed my Audition 2.0 on a new computer  yesterday. Of course, I've run into the same old issue of both the internet and phone activation processes being no longer available. I went around in circles with Adobe chat people this morning ... so, unless I can find a solution (or am willing to pay money for creative cloud services) I guess I won't be using Audition on my new computer any time soon.Thanks in advance for any/all assistance!

I purchased a license for Audition CS5.5 years ago.  Haven't used the program in a long time.  Tried to run it today and get an error message that it's not properly licensed and I have to buy another license.  Anyone familiar with this issue?

I need an activation code for Adobe Audition 3. I'm using Windows 10.

Alle Versionen nach Audition 13.0.13 haben das Problem, dass nach Bearbeitung von Mp3-Dateien alle ID3-Tags verloren gehen. Ich kann also nur die 13.0.13 verwenden. Eine Einstellungsmöglichkeit habe ich nicht gefunden.

I'm having trouble converting my SESX file to an MP3. I've followed all the steps of a bunch of different videos I've seen and can't seem to get it right. I got to Export then Multitrack Mixdown to select the entire session and it doesnt allow to choose that option. I've seen that it needs to be "master" but when I go to my audio hardware it doesnt show anything that says something like that. Once I was done recording I saved the file and disconnected my aggregate device of my microphones and closed adobe audition. I eventually reopneed the file and haven't gotten it to export as an MP3. I am new to this program and any information or steps that can help me would be very appreciated. 

I suspect there is an easy fix for this, I just don't know it. Up until a few minutes ago I would highlight a selction, hit the space bar and it would play that selection and stop (side note: is there a way to repeat that section as it would only play it back once?) But now, suddenly I highlight a section, press the space bar, and it starts at the beginning of the selection but doesn't stop at the end, it just keeps going. I feel like I accidentally turned that off and don't know how to reset it? I can use CTRL-L and it rapidly replays it over and over, but that's all I have found so far.

I recorded the soundtrack to my video on Adobe Audition. I then did a very pleasing noise reduction on the large file. Since I am using a Mac it seemed sensible to save the file as the one that gave me Mac friendly options which resulted in a .caf file. It never occurred to me that a format I'd saved in Audition would not be available in Premiere Pro. So, to fix the problem, I reopened the .caf file in Audition and tried to 'Save As' to change the format. However 'Save As' was greyed out. My attempt to export the file met with a similar shake of Adobe's head. So what now? Surely that quick decision to go for a Mac friendly file format hasn't left me with no options to use my file?

Hey all,I usually stream using discord with friends. The setup I have is kinda weird, but it was working until I got to discord. I'll try to walk you through what I'm doing, but I don't know what it is that is causing trouble.So I have Adobe Audition on a multi-track. I set the input as my microphone and my output as a virtual audio cable. I then applied a few filters in AA in order to clean up the audio in real-time. I pressed the arm to record (R) to activate the mic and then monitor record (I). This allows the virtual cable to take the output audio and supposedly feed it into other programs. I use OBS for screen capturing and it works well. I've tested the audio and AA is playing nicely with OBS. I can even upload a clip of the audio working properly if this site will allow me to. Here's a screenshot as it seems I can't upload an actual video. Now I thought since there was success here, I would be able to go over to the discord app and set it's input and output in a similar fashion.

If you look at the screenshots you can see that Adobe Audition is not recognizing all the downloaded text-to-speech voices I have. Same when I test in IOS. The siri text to speeches don't show up.

Hallo zusammen, ich habe seit kurzer Zeit extreme Probleme mit der Bearbeitung von Dateien in Adobe Audition. Ohne jegliche Änderung in den Einstellungen stockt die Wiedergabe permanent, ich kann nicht durch die Aufnahme scrollen und das Programm bleibt ständig hängen. Ich habe mittlerweile zwei verschiedene Computer ausprobiert, auf beiden lief das Programm zuvor einwandfrei. Ich hoffe jemand hatte das gleiche Problem und hat eine Lösung dafür gefunden, ich zähle auf euch, Google hat mir nicht wirklich weitergeholfen... Viele Grüße

 

Hi! I tried many times to record with Adobe Audition. But it does`t start. I don`t know what can I do. There is someone who can help me, please! 

I was succesfully running Adobe Audition in Windows 7 thru a Fire Pod to record. All was well until I finally had to upgrade to Windows 10. It wouldn't run Audition, so I purchased an upgraded version of the fire pod - Studio 1824c. They are not playing together well at all!I can start a new session & arm the channels I want to record on. However, all chanels pick up all the inputs without seperation, even if I arm all 8 chanels with only 3 of them containing a signal from a vocal or an instrument. How can I fix this?

noticed about 2 weeks ago, after my computer did some automatic updating(not sure what exactly updated). during playback, and while recording..i get choppy/glitchy, crackling and popping sounds. its not a constant thing..but rather every few seconds. however...while recording, these do not show up in the recorded audio. This also does not happen if im playing songs from the desktop or any other device...only when using audition.Using a presonus studiolive 24.4 mixer...and a bunch of other outboard gear. ive checked the firmware, and drivers for the mixer. both are up to date. ive disabled all windows sounds/enhancements as well. audio drivers for the pc are also up to date. in the settings for audion, my sample rate, buffer ect are all fine...same settings as i normally use.what else might this be? as stated...its only doing this with audio being played through a daw

Hey I'm a beginner in using audition I want to learn how to use it to make beats and songs but I can't anywhere where to learn to simply navigate the program.

I need to remix but enable remix doesn't seem to allow you to do so below 10seconds?

In my preferences for multitrack clips - auto crossfade is checked. I've tried toggling it on and off, and restarting my computer, but for whatever reason now as I drag clips they simply lay ontop of other clips. No more automatically cross fading. Any thoughts?

When I try to open Audition I receive this error message. I have deleted the application and innstalled it again but this error is all I get when trying to open it by double clicking the desktop icon. When I try to open it trough the CC desktop application by clicking Open I get no response at all. It doesn't open there either and no message is generated.I'm on W10. My CC plan is Enterprise. I have no problems in opening any other Adobe applications.  

Hello family, I downloaded Adobe Audition CC and used it for my voice over projects. But my trial days are completed. I would like to get a license key. Any assistance or guidance? Davis

Kindly, help me out please.  Iam recording well with my laptop from the amp mixer, but the challenge is that, my laptop is also picking sound from outside 

SIDE CHAINING in Au3 (CS2) AND MIRROR EQ TECHNIQUEa) Might anyone in the forum know of any way - any way at all - to side-chain? Has anyone discovered a workaround routing via the buses maybe? If not might anyone know of a VST plugin that could help achieve this same thing?b) Using additive/subtractive EQ, also known as "Mirror EQ technique"Could anyone give a step by step description of how to do that using the built in tools? Of course, you need to see the waveform of both target tracks to see where the strongest peaks or transient energy is occurring where the waveforms are competing for space and then (if my understanding of M/Eq is correct) to then make a 1.5 to 3 dB cut in one side and then the same amount of boost on the other track on the opposite side. I hope I have described this properly. See video for full explanation: Mixing With EQ - Carving EQ Holes - TheRecordingRevolution.com - YouTube Thanks in advance and appreciating any guidancehttps://www.youtube.com/watch?v=uoJqN

I feel like I'm going to feel stupid for asking.For some reason I can't seem to find a way to assign a shortcut key to Silence in the Keyboard shortcuts menu.The way I see it, it must be there laughing at me, and for some reason I'm overlooking it.Heres a screen shot of it.Please help. This has been making me crazy for about 30 minutes. I just need to know where to find it.

How can I export an audio clip and add silence in front of it so it matches up with the other tracks?  This will make it much easier for an editor to slide it in as a separate track without needing to try and get the timing right as they can just put the left edge up to the beginning of the track.  I know there's a way to do this but can't find it - thanks!  

Aud. CC 2017- Noise Reduction NOT functioning.  Chat "help" suggested I download another version and that ALL Audition versions had functioning Noise Reduction effects.  Last version where effect worked was Aud. 2015. Downloaded 2018 - still not working.  Please suggest a path for me to follow.MANY thanks!

Hey everyone!  I just bought a mixer/USB interface and two XLR mics (Rode Procasters, specifically) to start a podcast. However, even after assigning the Audio Channels to the proper Tracks (1>1 and 2>2, respectively), and hit record, the Audio from each mic is being recorded simultaneously into both tracks.  In other words, we can't record my voice into one track and my co-hosts voice into a separate track; we're both in the same track. Screenshots below. Can anyone help? Best,Zach