Questions

I am repeatedly trying to find new ways to make audio (music, not speech) to sound as consistent as possible which is literally impossible. The closest I have got to getting close to consistent playback volumes is using ITU-R BS.1770-2 Loudness in the Match Volume panel of CS6. Listening to a burnt CDR consisting of 20 in a row the results are pretty impressive but normally are are one or two let downs which are normally quieter rather than louder. What do I have at my disposal in CS6 to make the odd tracks that tiny bit louder so they fit in better with the other similar sounding songs? Thanks!

If there are edited videos that have no voice over, can you watch said video and record voice over at the same time? I'm hoping there's a method where you can pause the recording and the video at the same time, so they're in sync.Trying to cut back on audio editing to match the timing with the video. Thank you, in advance.

Dear Community, I am chinese living in france and I am following lessons in chinese using audacity. It would be easier for me to get the trial in chinese.I tried to change the language of Audacity through Creative cloud desktop / preferences/application/language. I set Chinese. Uninstall audition, reinstall it (trial again) but it is always in French.Anyone can help please ?Thanks you.

Hi. I've been working on a project in Audition for 3 days. I saved the project to restart my laptop and now when I try to open it the Audition just freezes and I can't access the project anyhow, even to save it differently or export. Any advice? Can I convert .sesx into .prproj so I open it in Premiere? It's days of work and I desperately need to restore it... Thank you. 

I edited almost a whole programe with SFX, I thought I'd saved it, but it is nowhere to be found, I cacn't find a way to revisit all the tracks associated with the origional, anyone know if there is a fix?? 

Does anyone experience Adobe Audition crashing when using the diagnostics tool for deleting/shortening silences? I am able to use it to find levels and scan the audio track but as soon as I click 'shorten/delete' all - it crashes and goes non-responsive. I have tried doing it one by one but even then it doesn't work - any suggestions?I have tried it in audiowave and multitrack and it makes no difference. 

I want to copy that signature and then search other episodes for the same clip. Is this even possible? Here's what I want to do--I have a long form podcast with a musical signature somwehre in the middle, 5 seconds long. It occurs at random times in each episode.

Hi,I've been helping the local HS choir record some songs since they can't have their typical end of grade concert. Today I was  recording 5 tracks, 3 booms on the choir, one for the piano and one for some other instruments. Typically the turn out pretty good but today they did a song with a solo part using one of the booms and the singer was basicly to close to the piano. So I've got way too much piano in the solo track. I attempted to invert a copy of the piano to try and cancel it out but it just didn't work, I think because of the difference in distance from the piano for the 2 mic's.I played with a few other effects but never really go anywhere. Any suggestions?ThanksKelvin

Try and truncate.Audition 13.0Likely not an Adobe-related problem, but you guys are wizards. So I'm reaching out.2 days ago, just fine. Though recordings have had ocassional static once or twice for about a month.Rode NT1 mic. Rode interface. 3 years.Recently got new PC. Recordings fine so far.New AKG mic. Haven't tried yet.2 days ago, recordings suddenly lifeless. I use a baritone for narration. Voice now has no resonance.Tried the old computer. Same bad sound.New XLR cable. No change.New USB cord from interface. No change.Tried the AKG mic. No change.Only thing I haven't changed is the interface. Do they just die out?Help.Sample of normal and bad attached.Thanks in advance. 

Hi all, I'm a Podcast editor with a few clients. I picked up a Dell G5 5505 SE from Best Buy a couple weeks ago, specs are awesome, gaming is great on it, however as soon as I load up any of my old Audition files I've edited in, the program slows to a crawl. Just dragging a clip from one place to another with take a few seconds of lag. It's essentially unusable for my job. I know the issue isn't my specs being too low, since I'm upgrading from an 2012 HP Business laptop that had a 3rd-gen quad-core i7, and my old HP is able to load up the same audition files and edit no problem. MY CURRENT SPECS:AMD Ryzen 7 4800HAMD Radeon RX 5600M16gb Memory (Upgraded from 😎144hz 1080p IPS Display512gb SSD One thing to note is that when an Audition project is completely empty and I just stick one Wav file in there, it works just fine. As soon as have multiple tracks and started chopping them all up, after just some light editing the program eventually becomes unusable. Also nota

This might be a super-noob question/situation, but... I shot a feature on a Red in 8K. I've dropped the raws into 4K ProRes 4444 codec. I have a cut together, and now I'm trying to do a 5.1 mix. I have a Logitech 5.1 speaker set-up. In Premiere, I have broken out the production by scene. What I have done is taken Scene 01 and nested it so I have one video track, one audio track on the Premiere timeline. On that, I do an Edit > Edit in Adobe Audition. In Audition, I have my "Audio" on track one, imported from Premiere. From there, I've done an Add Tracks, selecting all of them as 5.1 tracks. I've started dropping sound and dialogue onto the additional tracks. But none of them let me mix to 5.1. I go to Window and select "Track Panner" with the tracks selected. That pulls up the Track Panner, but it has no functionality. I'm stymied. It seems like this is the result of me missing a super easy, obvious, foundational step, but I have no idea what that step might be.&

HelloI change the tempo in a session ....When I save the session the tempo is not saved !!When I open another one the tempo settings are the same ..It's like this settings are not saved individualy ..Is there another solution ..Thanks for your answers 

Hi, is there a shortcut or way to automatically add fades to clips after a cut or ripple delete?   

I am currently running Audition 14.1.0.43 on a MacBook Air (Retina, 13-inch, 2020) which has a 1.1GHz Dual-Core Intel Core i3, Intel Irius Plus Graphics (1536MB) and 16GB RAM. With that, the lowest I/O Buffer Size I can go to is 128. Under that, and I get clicks while recording that showup in playback. The problem, though, is that operating at 128 produced a minor but noticable delay in sending the sound back to the monitors, so the band is thrown off. I would like to go down to 64, 32, or 16 as the delay seems to dissapear down there, but as I said, that produces the clicks. I am assuming the only way around this is a more powerful computer. Any recommendations on hardware or other workarounds is appreciated. 

Hello!A friend and I are trying to start a podcast, but the thing is they live in a different state. I am trying to get Audition to record both of our voices as separate tracks. We are currently using discord to talk. I did some youtube searches and found a video that kind of worked but didn't lol...Basically, it was a program call Elgato sound capture.What's happening is I can output his voice through "Elgato Sound Capture" as an input on audition. The issue is that I can't record my voice on a separate track b/c it only allows one input and I can't seem to change it. I can switch between my mic and "Elgato sound capture" but not use both as inputs. Does anyone know a solution for that? The mic I'm using is the Blue Yeti. Any solution would be helpful, mainly just how to record both our vocals on two different tracks at the same time. I hope that was too much rambling and made sesnse. Thanks!

Sorry if this is obvious, but all my search attempts have lead to answers for a related but different question.In Adobe Audition, I have two audio tracks (a conversation between two people).  I'd like to perform cuts/trims/fades on both simultaneously in order to preserve their timing in relationship to each other, but am unable to intuit how to select both tracks at once.Thanks for the help!

I would like to post a few helpful hints, if I may, for podcast hosts, or any of you who primarily use Adobe Audition for that type of Studio content.   My name is Jonathan Weiss, and I am a paralyzed United States Marine Corps veteran, who loves podcasting and music.   Adobe Audition is incredible, and I am constantly learning new things, and discovering more potential within this specific DAW.   The first hint is, and this is a no-brainer in my book, make sure to watch, and take notes on, the following topics, which are covered freely, by Mike from Music Radio Creative, on YouTube, or so many other extraordinarily helpful individuals, who have taken time to put these helpful shows together, for people just like you!   *Just a note here, I am not tied into MRC in any way. I just find their free videos, to be some of the most helpful, and instructive, of any which I have watched (and I have spent so many hours studying these videos).    Topics: What each

The latency on Auditions is horrible when using a usb mic. Ive watch every tutorial on the planet and still nothing is helping. Help?

I have Win10 with Audition CS5, and have been using this program for years. I am an audiobook narrator with a new project. When I started to record as usual, the program went ½ second and stopped, highlighting a short section of the screen after. Nothing was recorded. It does the same thing every time. I have to have a solution quickly, as I am on a deadline. 

I have bound a few shortcut commands to my mouse buttons using a hotkey program. Before one of the more recent updates to Audition, I had no problems using this method. Now, however, I cannot click the mouse 4 or 5 button without the most-recently-edited marker name window opening for edit. Is there any workaround for this? It's driving me nuts and seriously affecting my workflow.

I recently installed Audition CS5 on a WIN10 machine using WDM AoIP (4) channel audio drivers.Four channel because I can assing specific channels to several programs needing audio drivers without conflicts.In the Audio preference drop down, "MME" is my option and from there I assign a channel and also in windows sound Advanced Sound Options, I also assign the same channel to Audition! When I go to play or record, nothing happens,  Audition just sits there  which I have seen before using Win7 and not having the correct drivers installed. Adobe says that CS5, 5.5 will run using  ASIO or WDM . ASIO works fine here but my other programs will not work using the ASIO drivers so I will need to use WDM and not ASIO.Any ideas before I go back and install Audition 3.0,  because there is an Audio option "Windows Sound driver" which will  allow me to use the Windows Sound panel with this version.Any ideas or suggestions?  Thanks in advance.  &

So ive been using audition 2019 to edit my podcast episodes and have had no problems since but today when i tried to edit my episode, i kept getting an error saying that audition was having trouble writing or reading to disk and suggested to save my file and restart the program. Therefore i saved my file and restarted the program and now that i tried to open the file again and play it, there is no sound playing anymore. I even tried playing it through the normal windows player and i got the same result with no sound. I have tried opening another file and the other file works perfectly but when i open the one i saved, there is no sound coming from it although it shows that it is playing. 

Hi all, I tried to install the Captain VST plugins by Mixed In Key but Audition doesn't recognize these plugins (Captain Beat, Captain Chords, Captain Melody, Captain Deep and Captain Play). Does anyone have an idea how to get these plugins going in Audition? Thanks in advance! 

I am working on cleaning up a recording in Audition.  I followed a tutorial to do all the basics and it certainly sounds much better.  I used the deEsser tool once or twice but there is still a kind of  'hiss' or like dragged out ssss sound on some of the s's.  They aren't loud enough to go into the red or sound too harsh but they are sssss-y (like a sssnake)   I have done some youtube research but haven't quite figured it out.  One method that seems to work is to go in and manually remove each 'sss' area but there's got to be a better way...Looking for any guidance. The recording is 2-3 minutes and I'm not sure that recording is an option, so I'd like to make this work without a new take.  Thank you !

Okay the issue is quite specific. I have tracks with the output sent to a bus.The Bus output is sent to the master.However if this is the case I cannot pan my tracks. So i set the bus to output to my speakers plugged into the headphone jack of my laptop. Now I can pan, but when I export, the Bus is silent. I need the Bus to not be silent in the export and I need to be able to pan. I don't know what to do.