Questions

When substracting a file from itself (e.g. stereo, 48 kHz, 16 bit integer) via Mix Paste of the inverted signal is not zero in Adobe 25. In previous Adobe versions, it has worked out fine. Steps to reproduce:1) Copy a file "test.wav" to "test_copy.wav" on your computer2) Open both files, "test.wav" and "test_copy.wav" in Audition3) Select and copy the complete file "test.wav" (Ctrl+A, Ctrl+C)4) Select the file "test_copy.wav"5) Open Mix Paste -> Check "Invert Copied Audio"; make sure that the level is both at 100%, and cross-fading is disabled. Insert the copied audio via "Overlap (Mix)".Expected behavior: When substracting the file from itself, the result should be (digital) zero. What we however see is that it results in a low-level signal (approx. up to 50 on PCM scale). Same also happens when the insertion is done directly from file instead of the clip-board).Affected version: Adobe Audio 25.0.0.47, macOS (Intel)

I have a multitrack session with two tracks. When I mixdown the session there is an added gap of about 30s at the end of the file every time, even though there is no audio data in that part. I haven't used any reverb or other effects which would cause some kind of tail-off. I am on a Macbook Pro with the M2 Pro chip and 16GB ram, running Audition 24.6.3.2. I haven't had this issue on an M1 macbook or Windows machine in previous versions. Is there a setting or such to avoid adding the additional silence at the end?

I am beyond dissapointed with Adobe Audition. On several accounts, when I've gone to open an .sesx file that I have previously worked on, I'm unable to retrieve any of it because I get an error message that reads "an error was encountered during the conforming process: Unable to read or decode this file." I have to start the entire process over again. Yesterday I worked with technical support for over two hours until they finally gave up and said they don't know what the problem is. Any suggestions? I'm so fed up with Audition. 

Hello everyone, I am recording audio in Audition and would like to use Dubbing AI to change my voice while recording (I 'm doing a podcast and I'm not really confident my accent and voice). How can I connect this program to  Audition audio input? Is it possible? Please help, thanks

Whe i open adobe audition it opens just fine, i select the settings i want to record in and the this happens. I have changed settings, changed my audio interface, reinstalling, tried installing a previous version and nothing works! Is anybody else having the same issue?

I am trying to uninstall Adobe Audition but it won't let me .Shows , this msg "Couldn't uninstall Creative Cloud for desktop . You still have creative cloud apps installed on your computer that require it ." Then it says "sign in" then "to uninstall you need to sign in" ,  then when I click on "sign in" it loops back to "sign in" , ENDLESS LOOP??? Pls , "How to Uninstall Adobe Audition from Windows 11" ???

How can I change all frequecies in an audio file to 110hz .In other words , I want to end up with a monotone .mp3 file .These folks can do it https://audimee.com/create  . Pls , show me a demo or tutorial . Your Sales people said "oh sure no problem "  .For instance , this file: https://vmars.us/ShowMe/Change-to-110hz.mp3 Thanks for your Help.. 

 have been using ro Tools for music production and post production for over 20 years. I am because of me work as a teacher I am obliged to switch to Audition.  But I run into something crazy. If I use a bus track (for send / return of effects) I cannot mix in real time. I can set the fader higher or lower, nothing changes with the volume, not even the panning. The master fader does. The adjusted volume is only audible when I stop the project and press play again. If I do not use a bus track, the faders do work in real time. My question to you: am I just stupid, am I overlooking something, or is this not possible in Audition?

Hello!  All of a sudden, my Editor is undocked, and I can't redock it in the Classic Workspace.  No docking zones appear,  my file panel takes up the entire upper section of the window, and no resizing icon appears to size it left to right.  I can size it up and down, but want the File window on the left side of the Editor window.  Any help would be super appreciated.  Thank you! Also, no docking zones appear in any workspace.  If I undock anything, that's it.  My Audition i s up to date.  

Is it possible to enter a numeric value instead of clicking / dragging with the mouse? 

I wanted to remaster an old project but it's a ses file and I am completely mystified that adobe doesn't have a native utility to convert it to the new format. There's ses2sesx, but I'm not going to pay 50 dollars to do something that audition should be able to do on it's own. Does anyone have a copy of ses2sesx that they can send to me?Thanks

not sure why, but im all of a sudden unable to drag audio files from folders str8 into auditon. its annoying to have to go to insert file ect...any idea wats preventing this??

Many times I find myself fiddling around with audio effect settings, but up to this time I couldn't find a way to revert back to a previous effect setting for me to compare two sets of an effect's settings while I'm fiddling around. Is there an option to have Audition include effect settings in the Undo stack?

I recorded a multitrack session from a concert I was running sound for. One of my tracks will not play about 3/4 of the way through. But it does show the full waveform. It will play most of the track, but when I get to the final few songs, this track goes silent. It's the purple track I need. Is the file corrupted? Why? How can I fix it? If Audition still sees info in the waveform the data should be there somewhere right?

I just started a sound design class at college and need to use this app, but when I download it, it claims that my computer does not meet system requirements. I know this is wrong, as I have a top-of-the-line gaming PC with 32 gigs of RAM, 16 gigs of VRAM, and an incredibly fast processor with an M2 SSD. Is there a way to work around this error message and just download the file? 

Just upgraded audition today and all of my presets are gone!Running on a windows machine, and am in a middle of a project  

Can Audition have support for VSTs like Native Instruments

Just upgraded audition today and all of my presets are gone!Running on a windows machine, and am in a middle of a project 😞

Dear All,I am a new user of Adobe Audition.I have many audio files of ripped CD's that are one large file.I mean not separated in tracks.So I want to edit these files to create tracks of each song.Instead of marking the gaps between songs I would prefer if Audition automatically create the marks between gaps and create tracks for the audio file.Can anyone please help me how to do this? Thank you very much!

I am juest beginning to work in Au, so I have a lot of naive questions, like; where do I find the Au Prefernces option; it's not in the Edit drop-down? I wasnt to set them up so the last file I endited opens when I boot up the app. I want to orgainize the filing system; so when I use the Open option I don't have to search for my Au project folder. 

How do I manage the files from this Default workspace? The only option I see here are these 2 import folders.  Where are the files in my Au projects folder?  The screenshot shows the file I just opened, from inside Explorer, where there are about 8 files, but this is the only one I see. It's not like Pr's UI; which is why I'm confused.

Hi, I'm probably missing something really simple but I can't seem to get the hang of how files work between Waveform and Multitrack views (of the same 'track').  By that I mean I hit record in Multiview, and then if I double click to edit it, it opens in Waveform.  Presumably to adjust/clip out unwanted bits etc.  I do this but when I go back to the multitrack view, my edits haven't 'stuck' and I still have the unwanted bits in it.  I've tried deleting the unwanted part in Mulititrack view and dragging in what I think ought to be the edited version (from the Files box, but I end up with the original file back.  AA is fairly intuitive but I just can't get the hang of this.   Thank you fo rany help anyoine can give.  

In my work editing multi-cam YouTube soundtracks, I have only very rarely used Crop in the Context Menu. But I have far too frequently hit Crop by mistake "reaching" for the adjacent Silence or AutoHeal. And then I have to undo the damage before I move on.  I have removed the Crop keyboard shortcut, but the Context Menu still has the power to Crop when I definitely don't want it to. 

Hi all! There is a small "bip" not recorded on my Adobe Audition multitrack session. It starts before the clip comes in. Any idea how to remove that? Thanks very much!Tennessee

I need help putting a file into Audition  Hello,I have been trying to put a few audio files from my SD card onto audition, this SD card has recorded audio and has been able to import those audio files just fine but for some reason, these audio files are a no-go. the recorder I used is a Zoom H5 if that helps with anything. The error that keeps popping up is._140101-003740.MP3 Error: Media Foundation reported an error when opening the file.The byte stream type of the given URL is unsupported.I have searched for this error and I found some answers like downloading the files, changing the file name, and making sure it is not in my one drive. none of these work. If anyone knows how to fix this that would be super appreciated as this is for a big project due tomorrow. if you need any additional information please let me knowthanks in advance