Questions

Today at 07:19:11 AMHi AllA novice here - I’m using Adobe Audition 3.0 to produce various things for a radio station that I volunteer at.My source files are WAV (44100Hz, 16-bit). The finished mixes also need to be the same due to the playout system that the station uses.There’s an option in the settings to “auto-convert all data to 32-bit upon opening”. Is there any real benefit in enabling this? Will doing this improve how Audition applies effects (like reverb, compression etc.) or will it make no difference? My understanding is that AA's audio engine works in 32-bit float anyway (regardless of what file you feed it) so there's no point.When create a mix down, AA converts it to 32-bit. Is it worth just disabling that so they come out as 16-bit? My understanding is AA's audio engine when adding effects etc works in 32-float anyway in multitrack and edit view?Also, what I tend to do with effects is apply them in the edit view first as I find it easier than using the effect rack in the

Hi everyone,I need help with my Audition CS6. I use a Focusrite Scarlett 2i2 interface with my HP Pavilion 15 (Core i7) PC which I'm sure is more than capable for adequate processing. I usually record with one mic which is the RODE NT1-A Condenser. Every time I record let's say at least a 1-minute piece of audio, I hear at least one crackle or pop. And it cannot be erased. Even after exporting the file, I still hear it. I have tried EVERYTHING to get this fixed. Before anyone offers any solutions, please note what experiments I conducted to try and find out the root of the issue:1. I plugged the mic into a different input;2. I used a different mic;3; I used a different audio interface;4; I used a different XLR cable;5. I used a different PC with Adobe Audition CC 2015 installed;6. I even changed the buffer size to the highest setting (500ms).Still nothing. I have officially run out of ideas. I completely have no clue how to fix this issue. If anyone can help me with this, I would reall

Hello everyone,I am having issues with the edit clip in Adobe Audtion feature in Premiere Pro. I am using Premiere Pro v14.0 and Adobe audition 13.0.1.35. My issue is when I send multiple clips to Audtion using the edit clip it does the whole render and replace but when it gets to Audition only the first two clips make it and they are duplicated for example it would end up looking like "MYTIMELINE_audioextracted.wav,MYTIMELINE_audioextracted.wav, MYTIMELINE_audioextracted_01.wav,MYTIMELINE_audioextracted_01.wav.The rest of the clips on my timeline do not make it. My work around is to find the actual location of the rendered and replaced clips and import them from there. Which works well enough, but after making audio adjustments, the adjustments are made in Premiere as well but the timeline does not show that the clips are references of the new rendered and replaced files, it appears as nothing has changed and the audio is still being used from the original file. The audio does not cha

Audition CS5.5 /Win 10I'm ripping more vinyl. But now with Audition, since the Cooledit 2000, finally, couldn't keep up.AUD is setup by default. I don't recall making any specific changes during installation.44100 Recordings come through intelligibly but have a "in a can" sound.The hardware is Creative SB, mic-in patch line from a vintage sony receiver. Music Hall into phono jack of Sony. the example attached is MontyPython.I'm at a: "is it software/setting or hardware" level of questioning. Anybody have any experience with this? Or what you call that tinny quality?:)  The sample is spoken with machine gun patter in the distant backgroud (its not an artifact). The quality of the voices -- like they're too close to the mic.  Thanks all.http://mountcrumpit.com/Soundz/thatsmy5.mp3 

What's the technical difference between Total RMS Amplitude and Average RMS Amplitude?

HiMy Audition works fine. I decided to add 2 extensions from the Adobe site. The first time I installed immediately. When I went to Audition - no extensions.I looked in support and found Extension Manager. So I downloaded one of the extensions. This time I got an error message.I've rebooted, uninstalled then reinstalled - same error message!I've searched for an explanation and I can't find anything. I went on chat support for help and they redirected me to this forum!I have an Asus ROG laptop GL753VE-BS71, Windows 10 pre-installed, a 7th-generation Intel® Core™ i7 quad-core processor, NVIDIA® GeForce® GTX 1050Ti graphics and full Microsoft® DirectX® 12, 32 GB RAM, 120 GB C drive and 1 TB D drive. All my apps have been installed on D because Microsoft is a PIG! LOLI did install them using CC and I redirected all the folders in preferencees to DCan anybody help me solve this?ThanksJanice

 The transfer takes enough time as usual,but Audition comes up blank.Seems like an urgent item to fix?Is this an Audition problem>?I cant even finish vids with complicated sound for now. Can someone suggest a work around to get these sound clips into audition in the sequence they sit in PPro?    

I just started using a new version of audition after 15 years of the old 2.0 version. Is there no way to do a punch in with the new one? It seems like the most basic thing needed in a multi track program, but I don't see it anywhere. It was easy in the old one, and reaper, and ableton, and so on. any help is appreciated.

I bought a Sound Devices MixPre-6. I hooked it up to my Windows 10 computer using the provided USB-Y cable in order to use Audition to record multiple channels.  It was recording L/R just fine, but I wanted to get it to record individual channels into separate tracks. I downloaded and installed the ASIO (2.9.92.6) and installed into windows. I updated the firmware of the mixpre to 6.00. When I reopened audition I switched the audio hardware to ASIO. This allowed me to set the input for each track. But now when I record, the waveform appears silent.  But if I go into the clip gain and bump it up by 37db then I can see that there was a waveform recorded.  However on the mixpre the levels appear normal.   I've tried to adjust every setting in the Audio Hardware menu. But there's no change. When I record it on the mixpre at the same time as audition, the mixpre's playback sounds fine. What is going on? Please help. 

Hello all, I'm a CC user on a MacBook Pro with PP v 140.0.0 (Build 572) and Audition v 13.0.0.519 - I'm used to editing clips in Audition but since my update to Catalina and the new 2020 Adobe suite this is the first day I have attempted that process When I select a ckip on the timeline, right click and select 'Edit in Audition', Audition opens but nothing happens, no file appears. With Audition open I try again and no file appears. I've scanned the PP and Audition forums and not found this issue .... any advice?  Thank you.  

Hey I was following an tutorial on how to install vst plugins on because for some odd reason when I start scanning it stays at 0% & crashes, not to long I tried to reset plugins which still didn't work BUT after when I went to open up an session I was working on the day before all the audio waves were blank .............. plz is there anything I can do 

Good day.  I have been using Audition 3.0 for several years.  Recently I have discovered a problem that I don't understand.  I have songs that were recorded on a flash drive from a professional mixer at 44,000 Hz, 16 Bit Stereo, edited to remove spaces, normalized to 90% and saved in MP3 Format.  Some of those songs were then edited to create a clip of the song to be used in advertisements for a band.  If I Import just the clip, all is well in Multi-Track or Edit mode.  I also have some voice-over tracks that were recorded using Audition that went through the same editing process as the songs.  the voice-over tracks also work well in either Multi-Track or edit mode.  If I try to import both a clip and a voice-over, I get an error message stating that the formats do not match.  the error message occurs when I try to load the second element into the Multi-Track mode.  It doesn't matter which one is entered first, the error message appears

I am used to working with Audacity and recently made the shift to Adobe Audition, but I am struggling a bit. I do mostly narration and when I make a mistake, I used to just cut out a portion and then resume. But, when I record in Audition, I don't know how to explan it, but when I press stop recording, the way the waves are displayed as changed. I have it setup when I start to display a few seconds. I use the wheel on the middle of the mouse to scroll in and out, which I would describe as zooming in and out of the wave pattern. I think its nice to see a few seconds, because when I make a mistake I can just select the part I messed up and press resume and go again. Is there a way to disable this automatic zoom-change? I want it to always display the last I don't know 10 seconds of recordings and that's it.Can anyone help?

Hi Folks, Posted this question in Adobe Premiere group but received no replies. I am pretty new to Adobe products. I am performing a voice-over on a 30-min movie using Adobe Premiere. I am looking for an option, where, I can replicate the audio patterns of the original movie to my voice-over. In short, I am expecting that my voice-over should sound exactly as the voice in original movie. I am not sure if this is doable with Premiere or Audition. Also, the original movie has sound effects working in the background when dialogues are delivered. I am looking for a way to grab those sound effects behind my voice-over exactly as it is working in the original movie. RegardsTopics 

I use Audition for podcast editing - nothing too fancy, wav files from mics on four separate tracks, duration about an hour and individual compression/ vocal presets on the ffects rack for each track. With the last few episodes, I've come across the same problem - as I work on the project (editing out bits and muting/unmuting mics to eliminate bleed when only one person is speaking), the filesize of the session grows bigger and bigger, and audition seems to have trouble with it. I get frequent freezes - at first just a few seconds every now and again, but the more complicated the session gets, it eventually ends up freezing for a minute or more after a few inouts from me.  With my last project, the filesize when I first imported all of my audio was 11MB. I've just finished editing, and it's now 750MB! Surely can't eb normal that it's that big, just from adding edits? It's been the same with the last few projects I've made, even though I've started them from scratch

I think the answer is no. But, is there a way to type a number and have that be used as the value of a keyframe? I'm giving up after a few hours trying to get key frames to have values that are all within a 3db range and it goes -2, +7.1, +1.1, +9, 0, +5 etc. etc. etc.

Hello, I have been using Audition with no problems.  Today, the menu bars and everything at the top is missing (minimize, fullscreen, exit).  The program won't do anything and I have to go to Windows task manager to close it.  I have uninstalled and reinstalled at the same thing happens.  I would appreciate any help.

Have created markers and loop time of playlist in Adobe Audition. Success to monitor playlist. How to save the playlist into a audion file?

Hi,I have multitrack audio in FCPX which I have exported as an XML file.  I open Adobe Audition and try to import the XML file into Audition using XtoCC for mixing.I keep getting the following message:  Error:  This file is not supported by libsndfile. Code: 21.  File contains data in an unknown format.Can anyone help me  solve this problem? Hopefully,Martin Howells

Is it possible to put an effect like reverb on an input and hear it in realtime like in ProTools?

Is it possible to downgrade effects presets (or sessions) created in a recent version of Audition for use in Audition 3.0?Thanks,JG

I have a problem with an audio file of a speaking presentation which is very distorted, I can't recorder again. I would like to know if possible to eliminate/reduce the distortion ThanksAndrea

I use Audition to produce radio shows.  I have created a session for each show that I do, and have given them a name (name of the show plus a new number each week to reflect the show number).  Each week, I take the previous show's session, open it up, remove the previous segments, and then replace them with the new segments.  The show open, bumps, commercials, etc never change, so it's just the segments that change every week.  Once the final mixdown is created, I save the entire session with a new number, to correspond with the new show number (SHOWNAME SHOW 1, gets renamed to SHOWNAME SHOW 2 next week, and so on).  This process creates a folder titled "IMPORTED FILES" each week.  Inside of the that folder are all of the elements.  These elements are also individually in the multi track session where they should be.  So, this "Imported Files" folder is just making unnecessary copies of files, and taking up space.  Is there a way to make Aud

After updating to V13.0.2.35, I've lost the ability to Show Envelopes for third-party effects.  I can normally select any single attribute from Izotope Nectar 2 (like reverb-wet mix) and show that envelope to keyframe it.  The option to select anything from Izotope Nectar 2 is no longer available. I tried adding the native "Studio Reverb" effect; and that is available in the Show Envelopes menu. So this new bug seems to appear on 3rd party effects. 

 Does anyone know if it is possible to do a nonlinear speed adjustment in audition? The issue is that I have an old analog recording that is at the wrong speed, but it is a different wrong speed at the beginning then it is at the end, and the recording is about 15 minutes long. It is a very gradual change from beginning to end. I never thought that a 60Hz hum would be useful, but when you plot the spectrogram of the entire recording, you can see that a narrow-band of energy near 60Hz (correspoinding to the hum) linearly changes from beginning to end, so this means that while the recording is accelerating, it is a constant acceleration. Therefore, it should be possible to place two key points, one at the beginning, and one at the end, saying how much speed adjustment should be done and then the speed adjustment should linearly change going from start to end. Is this possible with audition? I know one could segment the recording into windows and do different speed adjustments in eac