Questions
Recently active
Hi -- I have written a script that launches from InDesign then goes to Bridge. A boiled down version is below. What I am finding is this script works perfectly as long as the folder I am referring to is the last one accessed by Bridge. If it was a different folder, bridge stills fires up and selects the desired thumbnail but then stops. The next time I run it, it works fine as long as I am accessing that same folder (the one that failed the first time). Any ideas would be greatly appreciated.var myPath = "C:\\myfolder\\mypic.jpg";var bt = new BridgeTalk; bt.target = "bridge"; var myScript = 'app.document.thumbnail = new Thumbnail(File("' + myPath + '"));\n'; myScript += 'var sels = app.document.selections;\n'; myScript += 'for( var i = 0; i < sels.length; ++i ) {\n'; myScript += 'var md =
Hello,I am using the Barred Rock metadata export script for Bridge CS5 but am having some problems with a recent batch of images. Whenever I try to export the metadata from these images, the script skips a large chunk of images. I can't seem to isolate what the problem is.I've compared fields, word counts, etc. but I can't seem to pinpoint why the script skips 600 images in the middle of the set. Has anyone else experienced this with the Barred Rock scripts? I had this exact same problem with the Metadata_BR script and was never able to resolve it.Thanks,Chris
I am trying to rebuild a 10 terabyte archive of images spread over 8 network drives with 1100 directories and avoid the problems of bridge running low of memory. This process is very time-intensive - it takes about 1 week of continuous processing. I think the following strategy might work:1. a windows dos script would pass the the full network path name to Bridge CS5 on the command line.2. As soon as Bridge starts, a bridge script automatically and immediately does a "Tools/Cache/Build and export cache" with "export cache to folders" turned off (since all directores already have the Bridgecache fully constructed).3. At completion of the cache rebuild, Bridge terminates.4. the dos script would process successive files in a similar manner.Is it possible to write a Bridge CS5 script that will do the necessary operations in 2 & 3 above? And suggestions as to how this might be done?
I keep getting errors when I launch Bridge saying "Bridge encountered a problem and is unable to read the cache. Please try purging the central cache in Cache Preferences to correct the situation".I purge the cache but the message keeps coming back. I tried deleting the Bridge Preference file but still keeps happening.No doubt it's something wrong on my computer. Always seems to be the case when I post a problem. But I thought I'd post just in case there is a solution.Mac G5 Quad - OS 10.4.11 - 12 GB RAM - 2 internal TB Drives with plenty of free spaceLindaAdded Note: Thought it might be relevant to mention that I also use Lightroom 2 on this setup, just in case the two programs are conflicting.
ExtendScript Toolkit CS4 (for Windows) is driving me nuts. Am I the only one having problems with the way the editor is handling tabs? -- Olaf
Hi,I have approximately 65,000 images for which I need to catalogue filenames and pixel dimensions into an Excel spreadsheet. I am using Bridge CS5, and I can see a field containing pixel dimensions, but I can't seem to find a script that will export this field into a file with the associated filenames. There are some useful scripts that will export IPTC and EXIF metadata, but I really just need to compile the filenames and pixel dimensions.If you know of any scripts or free software solutions it would be greatly appreciated.Cheers.
Hi,is there any hashtable implementation in Bridge's script that can be used? I searched the forum and the "Big G" but all I was found were some words about an old AdobeLibrary2.jsx that I cannot found in my CS5 installation.ThanksKonrad
Hi,how can I get the name/id of the collection I clicked with the rigth mouse button on to open the context menu?I want to run a function on the current selected collection via a submenu commen like "Rename" or "Delete".I only can find a couple of functions to manipulate and create/delete a collection, but no function or object that tells me the current collection.How can I access this?ThanksKonrad
Hi,I'm looking for an overview of all menu identifieres. I only can find single example for the edit menu, or the help menu or such things.I want to add an menu item to the submenu of a collection. Where can I find this ID? And for the case of other menu: Where can I find an overview of "all" identifieres?Thank youKonrad
Hello,I made a jsx script which generates several layered TIF files which get placed in a PDF as separate pages. The script in CS3 used the PDFPresentation function and all was well. However now in CS4 since that functionality has been moved to Bridge, I don't know how to make a PDF directly from the script (which is currently running in Photoshop). Also on a more important note, the text vector data is lost when the PDF is made in Bridge! It's just one big raster image on each page - which means low print quality. Why can't I select an option in Bridge to include fonts in the final PDF output?
Whenever I use Dr Brown's 1-2-3 script for resizing images they always resize to 72ppi instead of what I put in. Any ideas why this should be. I am trying to resize from 300ppi to 240 ppi.
Hello, I need to export all the metadata from a library of images to a comma delimited txt file which will then be loaded into mysql. Does anyone know of a bridge script that will do this ? thanks kindly for any help.
i just create a 'Image Processor Outter Mode.jsx' script for photoshop and copy to ../photoshop cs3/presets/scripts/ folder. i can see the menu item list in photoshop file->script->.but can't find it in the bridge cs3 menu. in bridge cs3 tools->photoshop. it only list the default script, image processor for example.i'm plan to search files in bridge and run all the result files with the new jsx. anybody can help me ?thanks.
For some jobs my workflow ideally involves manually sorting the order of a batch of RAW files in Bridge (the RAW file names are as assigned by the camera) and then using a PS Action from Bridge to convert, save, and rename the batch of files. I want to end up with my image files sequentially numbered in the manually sorted order.However, my PS Action automatically processes the files in ascending order of their RAW file names and therefore my manually assigned file order in Bridge is lost.Is there a script (or other method) which will allow me to run a PS action from Bridge on a batch of files while keeping the manually sorted order for the purposes of the numbering sequence of the renamed output files?My current workaround is to Batch Rename in Bridge a copied set of RAW files as an intermediate step to running my PS Action on the renamed RAW file copies. It's not a bad workaround but if there is an easier way, I would much appreciate knowing about it!Geoff
Hi,i know there exists some scripts which can be run in Photoshop for example (inside CS) and get the selected files inside bridge.but i want to write a program (let say with Delphi, or .Net or ....) and i need to get the list of the file(s) which are selected in Bridge, so i don't think that i can use those existing scripts since my programs is running outside of the CS world.does some one know a how ?!Thanks,
I installed Design Premium CS5 last week and tried Bridge today. It worked fine and then suddenly whenever I open it, I keep getting this window. I close the window, but it appears again after a few seconds. I can still use Bridge, but the window won't go away.
Hi, gang.Any chance there exists a script to auto-locate an image whereby a geographic place name entered as a keyword/tag/label can be shown on Google Maps? I've seen websites that show such locations, but I can't tell whether they've been manually entered or auto-entered.Thanks!
Hi, folks.I have my RAW files in one folder and my derivative images (e.g., PSDs, TIFFs, JPEGs) in another. The derivative files only share the last four digits of the RAW file names (e.g., the RAW file is named 100826-14278.CR2 but the JPEG version is only named 4278.JPG). Also, the derivative files have no metadata.Is there a way to use a script to match all the derivatives to the RAW files based on the last four digits, then change their file names to match the RAW names. And, if that's possible, can Bridge then cascade the metadata minus the camera data EXIF from the RAW files to the derivative files?Thanks!-GregP.S. My knowledge of scripting stops with cursive handwriting, so please be gentle.
Hi,I am trying to create a script for saving a copy of a eps file. Here is what I did:/*Read the files name from a list.txt fileCreate the ./folder with the file name without extension if it does not exist.If eps extension from the list copy the file in the created folder.If jpg, resize the jpg accordingly to the user input and save the high quality jpg in the folder.*/#target bridgeif (BridgeTalk.appName == "bridge"){ var menu2 = MenuElement.create( "command", "Microstock", "at the end of Tools"); menu2.onSelect = function () { filesFromList(); } }// AMEND PATH TO SUIT! if(!fichiers.exists){ alert("List.txt does not exit " + fichiers); return; }var agency = "";var base = "C:/Users/Jean/Pictures/";var myFolder = prompt("Nom du myFolder", "ACCEPTED-EPS");var microstock = prompt("Longueur de l'image à créer?", 250); switch(microstock){ case: 400 agency = "..."; default: agency = "iStock"; }var fichiers
hello, you guys have any clue what is wrong here.. I created a web gallery using Bridge CS4 but the uploaded files came out blank. When I use Bridge CS3 to create and upload my web gallery it is okay. When I view the HTML file locally, it loads fine. it is only when I upload the file to the server that creates this blank page issue.
Hi,I need a script that instruct Bridge to Switch to a color Preset.I have no problem using AS but Dictionary os Bridge don't have support to AS but only can invoke Javascript.Somebody has an example about how to set Bridge (and Sync automatically all other Adobe APP) choosing a Color Preset name?Stefano
I'm working with a script to assign a string (in this case, the color of the product in the image) to the description field in the image's metadata. It would save time on the layout side by taking advantage of InDesign's live caption capabilities. I'm processing the selections with a for loop, and the script will either work, or return an error: "XMP Exception: LFA_Close: FSCloseFork failure" I can't reliably duplicate the error, sometimes I can process all the images, and other times it errors out after the first one. Does anyone have a description of the error, and/or any suggestions on how to fix it?Using Bridge CS5-Sfunction writecolortodescription(colorway,myimage){// adds the colorway name to the "Description" field in the metadata to take advantage of InDesign CS5's live caption features.// borrowed heavily from a script by Paul Riggott (adobe forums)loadXMPLib(); var thumb = new Thumbnail(myimage); if(thumb.hasMetadata){ &n
Hello,I'm looking for a script for copying the filename of a tiff to the description in that same file's iptc, with a couple of contextual changes to the name. Those changes are:replace any = with :replace any * with /add the prefix "CMS:"So here's an example:inputfilename: 87*37=6.tifdescription:outputfilename: 87*37=6.tifdescription: CMS:87/37:6I had a script that did some of these things for a while, but it was quite slow and I don't know how to rewrite it.Thank you in advance for any help,Lewis
hi paul,Through scripting i have to updated the field, Sometimes in (advanced) tab, some of the namespaces missing, second oftenly it shows engine busy.If i keep on working with particular files, it shows the xmp metadata error, cannot write the datas. i use coded : md.namespace = "http://ns.adobe.com/photoshop/1.0/"; mdpurl.namespace = "http://purl.org/dc/elements/1.1/"; mdrights.namespace ="http://ns.adobe.com/xap/1.0/rights/"; mdiptc.namespace="http://iptc.org/std/Iptc4xmpCore/1.0/xmlns/"; mdtiff.namespace = "http://ns.adobe.com/tiff/1.0/" ; md.Headline = Headline[cnt]; md.Source = Source[cnt]; md.Author = Creator[cnt]; md.Title = Title[cnt]; md.Credit=Provider[cnt]; mdiptc.CiEmailWork=CreatorWebsite[cnt]; mdiptc.CiUrlWork=CreatorEmail[cnt];  
Remix with Firefly Community Gallery
Thousands of free creations to fall in love with and remix in Firefly.
Already have an account? Login
Enter your E-mail address. We'll send you an e-mail with instructions to reset your password.