Questions

Hoe kan het dat Adobe DNG versie 12 4 0 555 converter mijn Sony ARW bestanden verkleint naar 1024 x 683 pix? Ik gebruik de DNG converter zonder daar iets in aangepast te hebben. Als ik het ARW bestand door een vriend laat converteren, die ook de Adobe DNG converter gebruikt, blijf het bestand wel 6024 x 4024 pix.Ik werk met windows 10.

Hello -I just bought a new MacBook PRO and installed Photoshop CC19 + ACR 11.2.I tried to load all my ACR presets from my previous computer.Strange enough some of my very old presets are present but some more recent presets are not showing up?Any reason for that?I get the following message when I try to load them manually:"Unable to load the raw conversion settingsThe Camera Raw settings in the selected ".xmp"metadata file are not compatible with this image"Don't tell me that I've lost all these presets please… . 😛Thank you,- Dimitri

Hello-I work exclusively in ACR and Photoshop. I have purchased Profiles and Presets (and also made up some of my own. Recently I noticed that some of the Profiles were not present in my Profiles Tab in ACR. I've tried to reinstall them and I get an error message steing 'already installed'. Questions- Why do I have 2 different adresses where these are located (both viewable and not viewable)? What is the correst address? I've tried clicking on the zips, extracting them and dragging and dropping the xmp's into the different folders. Just about everything! I've looked at the preferences in both ACR and PS CC to see if I could find the address or select an address to look at. No luck. I am not a computer guru but do know my way around a bit. I'm enclosing 2 screen shots that show the 2 different addresses and what is viewable and not viewable in ACR. I've thought that maybe I just need to uninstall PSCC and start over. This all started after the last update.Thanks in advance for any help.

I'm trying to find out how to change the Camera Raw Histogram from RGB to show the Luminosity graph.  Adobe Help can't answer me.  Any help very welcome, thanks.

Hi guys, whenever I open a photo in ACR, first thing I see are my bottom panels, so everytime I edit I need to scroll all the way up to the edit panel. Is there a way to change that? Because first thing I need is the edit panel, then maybe I will scroll down to the other panels and use them, not the other way around.Thanks.

I've been using Photoshop CS5.1 with ACR 6.7 for many years now, but just upgraded to CC. The old version of ACR used Process Version 2, and I was expecting full compatibility with the new software. While this has generally been the case, there seems to be a serious omission: spot removal instances in my files are not being seen in ACR 12.4. Considering I've edited thousands of DNG files, and many were shot at small aperture that required removing dozens of dust spots, this is a critical problem. Am I missing something, or was a change made to the Spot Removal tool sometime in the mid-late 2010s that broke backward compatibility? If so, I'm willing to get my hands dirty with any specailized software that might be available, or even modify the XMP metadata appropriately if that's possible. What I can't tolerate is manually de-spotting all these images if I want to open them in the new software - I may be forced to go back to CS5.1 if that is the only option.

I know what you're thinking and you are right, I'm an idiot. So I took some senior photos for my niece and was editing in adobe bridge and yes, I did a batch rename to a lot of photos in their raw format on the memory card. All of the thumbnails are now black and say "exec" in bright green: When I double click on a thumbnail I get this:Please tell me they're not lost!! Thank you!

Hello,I have captured raw images from my action camera(gonoise play2), when I open it in lightroom or photoshop, I see this raw image file is not supported by the lightroom or photoshop, can anyone have a look in the file attached here, and let me know if you are able to process it or not,will be a great help, Thanks in advance.Regards.

I was pushed into 12.4 and I regret it. What's the improvement? I don't know - I haven't found it yet. What are the drawbacks? One can no longer set "Neutral" (or any profile aside from Color or Monochrome) as the default starting point. I guess they decided we want the Adobe engineers to initiate the editing process. One reason I shoot RAW is to have control over the image. It appears they have completely illiminnated the perspective control tool. Can this really be true? Am I just missing it somewhere? If they did indeed delete it ... what in the world are they thinking?

Hi, I've just edited a bunch of photos in ACR but then it crashed. Can I restore the edits I've done somehow?

I have the latest version of Camera Raw but the sliders don't work for me. How can I go back to the previous version. Thank you

For the life of me I cannot figure out 1 good thing about the new UI on Camera Raw 12.3I did not sign up for Lightroom.  I hate the placement of the tool barsI hate that the Tab layout is now and endless challenge of scrolling up and downI hate the crop toolI hate that the functionality of the hand tool to view your cropped photo in full screen seems to have goneI hate that there's no quick toggle out of crop viewI hate the vertical menu layout vs tabsI hate that it now takes me 3 times longer to process my photosI hate that you were too lazy to keep the SAVE button WHY WHY WHY ???

I just formatted my main disk and installed Photoshop CC on my pc. All the settings are reseted as expected but Scrubbing Zoom feature doesn't work in Camera Raw. It's grayed out and says "(GPU Only)" while I can use this feature in normal mode and it recognizes my GPU. Is there a way to fix it?

I am importing some XMP profile into Camera Raw from another machine. These profile includes a .dcp calibration profile. But when I load the settings I get a warning triangle stating that 'Profile not installed, rendering incorrect'I have searched far and wide and found several posts showing how to do this. But for some reason it doesn't load. I have tried placing the files both in c:/Program Data/Adobe/CameraRaw/CameraProfiles as well as in c:/Users/[username]/App Data/Roaming/Adobe/CameraRaw/CameraProfiles with the accompaying xmp in the settingsfolder in the same location. (eg. c:/Program Data/Adobe/CameraRaw/Settings) I've tried restarting the machine. I've tried editing the xmp to have a simpler name, I've tried omitting the md5 hash check ... But I'm running out of ideas. This is one a fresh install of Windows 10 64 Pro with Photoshop, Bridge and CameraRaw. Nothing else so far.

Suddenly my PS Raw coversion does not run at well, slides wont move etc.uninstalled anreinsatalled PS and also did install from Adobe Raw.Windows reports no errors

As a professional photography studio we have developed hundreds of presets that we use constantly in our RAW workflow. Presets were previously used on the Canon EOS 5DSr. However when opening .CR3 files from Canon R5 in Adobe Camera Raw 95% of all our presets are not compatible with the images. This also affects all presets from VSCO cam.  I'm wondering why or what it is that would make these presets work with one Canon camera file and not another? Is there any solution from Adobe that would make these presets compatible? Or do we need to  throw all that previous work in the trash and start from scratch developing presets? 

Hello. If I open a RAW file in Bridge is there a way to have the Use Profile Corrections always checked as default? Thanks.

Hello and please help. Having no problem opening JPEG's from Bridge to Camera Raw, but I thought it was also possible to open TIFF's. No option available now. Am I wrong, can you open TIFF's into Camera Raw, and if so how? Thank you.

Hello all, what a disappointment when I tried to use the raw files from my Canon EOS-R. I am using Lightroom 3 on my Mac book pro. I tried to update the  program but I get an error messsge  like I'm not hooked up to the internet, when I am. Any thoughts or solutions. Thank you 

It is possible to edit with multiple screens at the same time when editing in ACR. Once the image is opened, I know how to have the image open on both screens at the same time. But is it possible to do this when you just pass the images through the ACR module? how could it be done?Thanks and best regards

Working with Camera Raw was simple in pre-12 Camera Raw. You could update an image and then syncronize the rest of the images by clicking on an icon. With 12, that icon was hidden behind a single icon (more stupid clicks), but you could still get to it. Now with 12.3 and later that's also gone. Why ruin a decent flow. At least put a menu where you can get to the damn features rather than forcing folks to memorize keystrokes if they don't want to. If nothing else, stop forcing an update to the latest 12 when I've installed a pre-12.3 version. 😕😕  

I've searched for answers and can't find them. When in the new 12.3 version of Adobe Camera Raw batch editing multiple images (or even a single image for that matter), how does one apply a color label? I used to be able to for example hit ctrl+6 to label an image red in ACR. Now in this new version that doesn't seem to be working and even right clicking doesn't give an option for color labels. Thanks in advance for the help. 

So not sure who can help me here but when I make a preset and try to save it on my phone as a DNG file after trying to put the preset on the collage it just shows up as a blank grey / black screen how do I fix this ?

When I open RAW files in Lightroom, Elements and Photoshop, images open in Develop module with rows of red and black pixels throughout the image and blocks of random colors.  I uninstalled/reinstalled Lightroom and installed a new graphics card with no improvement.  JPEG files open correctly.   This problem also occurs with Elements and Photoshop.  If I open a RAW files in Luminar and export it to Lightroom, the problems disappears.  I tried changing settings in Lightroom, to no avail.  This problems began with Camera RAW 12.3 and continues with 12.4.  I also converted RAW files to DNG and the same problem occurs.  This problem is present with RAW files from various camera formats, Olympus, Nikon and Sony. 

Bonjour,  Je ne comprends pas pourquoi, mais sur mon mac (Catalina) je ne peux pas importer de filtre Cube/3DL... car l'option n'apparait pas dans nouveau paramètre prédéfini. Et, les fichiers sont grisés dans "charger des paramètres". Seuls les XMP sont lisibles, et je ne sais pas convertir un .CUBE en .XMP