Questions

Dall'aggiornamento di Camera Raw di giugno/luglio 2026, la Riduzione rumore IA sul mio Mac Studio è diventata più lenta. Un NEF da 45 MP della Nikon Z9 prima richiedeva circa 9 secondi, ora ne richiede stabilmente circa 15.Sistema:Mac Studio M2 Ultra, GPU [60/76] core, Neural Engine 32 core, 64 GB di RAM macOS [versione macOS] Camera Raw 18.7.0.2743 (sia da Bridge 2026 sia da Photoshop 2026, stesso risultato)Cosa ho già escluso:Riavvio pulito: swap a zero, pressione della memoria bassa, ANECompilerService terminato Stesso tempo con Bridge inattivo e aprendo il file da Photoshop Accelerazione GPU attiva nelle preferenze di Camera Raw Cache GPU di Camera Raw azzerataIl rallentamento sembra coincidere con l'aggiornamento che ha spostato la Riduzione rumore dalla GPU al Neural Engine di Apple. Sui portatili con GPU più piccole è un grande miglioramento, ma su un chip Ultra con una GPU molto grande il percorso GPU precedente sembra fosse più veloce.Potete confermare se sui Mac M1/M2 Ultra v

Description of IssueAdobe Camera Raw repeatedly encounters a GPU out-of-memory error during normal GPU-accelerated image editing, particularly when working with masks.The error displayed is:“The graphics processor has encountered an out-of-memory error. Due to a run-time error, GPU acceleration has been reverted to Limited for the remainder of the session.”This occurs on a very high-end workstation with an NVIDIA RTX PRO 6000 Blackwell Workstation Edition with approximately 96 GB of dedicated VRAM.Importantly, the Camera Raw diagnostic log shows that GPU initialization completes successfully and that approximately 100 GB of GPU memory budget is detected. The actual failure occurs later when Camera Raw attempts to allocate/render an image mask texture.The relevant Camera Raw log entries are:Determined GPU3 hard status: success*** GL Error: E_OUTOFMEMORY (hr=0x8007000e): imageMaskTex ****** GL Error: imageMaskTex ****** Error: dng_exception (200025) in cr_gpu_tile_render_task ***TrimFoot

one PC two OS, two different PS ver, and same results!ACR from ver 18.5 18.6 18.7 stop working! it just not open...install today new 18.7 nothing change, uninstall and back on 18.4.1 the last ver that works.win10 PS2019+ACR18.7win11 PS2027+ACR18.7  p.s. I checked whether this was a compatibility issue or something related to new library or runtime files, but I found that it isn’t. The problem is with the Camera Raw.8bi file itself. Simply replacing it with a newer version causes the ACR to stop launching, the same is true in reverse: if I take a freshly installed newer version and replace only its Camera Raw.8bi file from 18.14.1, while leaving all the other libraries untouched keeping the newer versions, ACR launches again and works normally. 

And another issue with masks / radial filters:If I set a value to -100, it should actually mean -100.For example, setting Saturation to -100 inside a mask should make that masked area completely black and white. But in the current versions, it feels more like -50. There is still clearly visible color left.This used to behave differently a few versions ago, and the current behavior is incredibly frustrating. A value of -100 should represent the full effect, not some reduced version of it.Please stop changing basic adjustment behavior like this. It makes precise and repeatable editing much harder for no good reason.

Hello, I have hundreds of headshots to edit in Photoshop. I really like the Camera Raw Remove Blemishes feature and want to make an Action out of it. The problem is that when create an action using “photo A” and then try to use the action on another photo “photo B”, the mask of blemishes are copied from Photo A and it just puts blemishes from Photo A onto Photo B. So, instead of the Remove Blemishes Action re-processing the Blemish filter, it just applies the processing that it created when I made the action. I love the actions and have made many for all kinds of purposes that help me move through my edits faster. I can’t seem to figure this one out.If you need clarification I can try and do that.Thanks,Will

Adobe Camera RAW 18.7 problem bug fix help!I updated to the new version 18.7, and the "more image settings" menu isn't working correctly—specifically, expanding the options. It often happens that when I click the three dots, the "reset to open" or "reset to default" function triggers immediately. Why are those settings right there at the very top? I just want to export the settings to XMP, but instead, I end up resetting everything! I’ve actually lost all my edits because of this! The previous version didn't have this issue. Please fix this bug or move the reset option! 

All day since I updated PS, Camera Raw (which last updated 7 days ago) is running probably the slowest I have ever experienced. It’s unmanageable. I tried dialing back to the version of PS that was working just fine yesterday (PS 27.10) and there was no improvement. Then I tried reverting ACR and the last available installer before 18.7 was 18.4 but then my images were jacked up because they have been edited on a newer version so I just re-updated everything. I am SO TIRED of constant issues. AI features are super cool and all but I really REALLY just want the normal stuff to work at speeds that don’t make galleries take 14 business months.Just to be clear and so no one thinks I am confused - it is CameraRaw that is lagging - I haven't even tried to use PhotoShop today but the only thing different since yesterday is the PS update to 27.11. CameraRaw is on version 18.7.MacBook Air - 15 inch, M3, 2024, 16GBRunning OS Golden Gate 27.0.1** I purged my cache, deleted the old GPU and Logs fo

When I crop an image and finish with it the new crop does not fill the screen. Its stays the same size and just removes all the pixels outside the crop. In previous versions when I would confirm the crop with the enter key it with bring the new images to fit in view. Its is frustrating that I have one more button to click now every time I crop and every time and slightly adjust the crop.Im using ACR 18.4 on a 2024 M4 Mac Mini

Please Bring Back the “Constrain Crop” Option in Adobe Camera RawPlease bring back the “Constrain Crop” option that was available in previous versions of Adobe Camera Raw.This feature automatically adjusted the crop boundary when an image was rotated, preventing empty or transparent areas from appearing around the edges. It was extremely useful for photographers who need to straighten and crop large numbers of images quickly.In the latest version, this option is no longer available, which makes the cropping workflow much slower and less convenient. Users now have to manually adjust the crop after every rotation, even though the previous feature handled this automatically with a single checkbox.Removing this option feels like a significant step backward, especially for professional photographers who process hundreds or thousands of images at a time. Please restore the original “Constrain Crop” checkbox, or provide an equivalent option that users can enable or disable depending on their

I took this picture yesterday afternoon.  I forgot to bring a polarizing filter and hoped ACR would help me but I am struggling to find any real value in the parameters I have used.  I really want the reflection of the car removed.. 

Bonjour à toutes et à tous.  Lorsque je veux attribuer une notation ou bien une étiquette à mes images, un son d’erreur se fait entendre.  Aussi, CR18.7 me prescrit les raccourcis suivants (+ capture d’écran) : Note 1 étoile :  & Note 2 étoiles :  é Note 3 étoiles :  “ Note 4 étoiles :  ‘ Note 5 étoiles :  ( Etiquette rouge :  § Etiquette jaune :  è Etiquette vert :  ! Etiquette bleue :  ç   Aucun de ces raccourcis ne marche. De plus, lorsque je vais sur le site d’Adobe, les raccourcis prescrits sont les suivants :  Note 1 étoile :  1 Note 2 étoiles :  2 Note 3 étoiles :  3 Note 4 étoiles :  4 Note 5 étoiles :  5 Etiquette rouge :  6 Etiquette jaune :  7 Etiquette vert :  8 Etiquette bleue :  9 Pouvez-vous m’aider à résoudre ce problème ? Mon flux de travail est actuellement très réduit et je perds énormément de temps.  Je précise que lorsque je clique sur “Commande + 4”, cela attribue 1 étoile à ma photo. J’ai essayé toutes les autres touches du clavier, rien ne marche. Merci d’

Bonjour à toutes et à tous.  Lorsque je veux attribuer une notation ou bien une étiquette à mes images, un son d’erreur se fait entendre.  Aussi, CR18.7 me prescrit les raccourcis suivants (+ capture d’écran) : Note 1 étoile :  & Note 2 étoiles :  é Note 3 étoiles :  “ Note 4 étoiles :  ‘ Note 5 étoiles :  ( Etiquette rouge :  § Etiquette jaune :  è Etiquette vert :  ! Etiquette bleue :  ç   Aucun de ces raccourcis ne marche. De plus, lorsque je vais sur le site d’Adobe, les raccourcis prescrits sont les suivants :  Note 1 étoile :  1 Note 2 étoiles :  2 Note 3 étoiles :  3 Note 4 étoiles :  4 Note 5 étoiles :  5 Etiquette rouge :  6 Etiquette jaune :  7 Etiquette vert :  8 Etiquette bleue :  9 Pouvez-vous m’aider à résoudre ce problème ? Mon flux de travail est actuellement très réduit et je perds énormément de temps.  Je précise que lorsque je clique sur “Commande + 4”, cela attribue 1 étoile à ma photo. J’ai essayé toutes les autres touches du clavier, rien ne marche. Merci d’

ACR is using all 24 GB of VRAM and does not appear to release it. Earlier, I was using an RTX 5070, so I assumed that 12 GB of VRAM might not be sufficient. However, I have now upgraded to an AMD RX 7900 XTX with 24 GB of VRAM, and I am still experiencing the same issue.Any masking or scaling operation in ACR immediately consumes almost all 24 GB of VRAM. The memory is released only after I completely close ACR.

The reflection removal tool works well until adding denoise filter to the image. the reflection returns to the image once denoise is finished. it does not matter in what order the two tools are added to the image, the reflection returns.

When opening RAW in ACR and using Crop (C) tool from left or right of the image it actually starts moving the GUI rather than cropping the image, not sure what version this has been changed, but before i never had this issue, please make GUI have lock option so when cropping images it would never try to resize GUII understand there is way to aim and select the right resize tool but margin for aim is so little and its waste of time, GUI should be set up once for most people don’t need to constantly be able to resize the side bars of ACR GUI

ACR masks become misaligned after copying and inverting, or after AI DenoiseSteps to reproduce: Open several photos (I usually work with 30–50). Select all photos (Ctrl+A). Open Masking and select Subject. Without deselecting the photos, rename the mask to “Subject” for all of them. Deselect all photos. Manually edit each mask on each photo using brushes, adding/removing areas, etc. Select all photos again. Select the previously created “Subject” mask and copy it with Invert enabled. Observe that the manual edits to both the original and inverted masks are now misaligned or applied to the wrong areas. Both masks must be manually corrected across all photos. Related issues: Masks sometimes become misaligned if created or edited before running AI Denoise. The same problem occurs with the Remove tool: if objects are removed before running AI Denoise, the removal edits shift by a few percent afterward. These issues can result in substantial rework when processing large ba

Hello everyone, as a user of lovely fuji x100v I often use digital crop function that makes from 35mm a 50mm or 75mm lens.. this function crops the jpegs but in raw it is stored just as metadata.. my problem is that when these raw files are opened in bridge it doesnt read the crop info and shows it as full image.. also when converting via adobe dng converter from  raf to dng it doesnt detect the crop so my composition is off .. So I was hoping adobe could fix this because the metadata is there and I could have a cropped image already with option going back ( like a preset already applied) .. there is one unofficial plugin for ligtroom and one other manufacturer implemented this in his dng converter but it is apllying also demosaic or how is it called and the dng is 30% bigger in size so a no go for me.. My simple workflow is bridge + camera raw.. Also it would be cool if there was option to save a manually cropped edit as preset because camera raw ignores manual cro

I am the poster this threands. That is not the question!!! That is totally bug!! But the manager classify my threads as Question!SOOC of Lumix S9 with Vlog color profileRW2 of Lumix S9 was opened in ACR 18.6It can be clearly observed that the consistency of color is severely inaccurate!This condition is identical with Lumix S1M2SOOC of Lumix S1M2 with Vlog color profileRW2 of Lumix S1M2 was opened in ACR 18.6It can be clearly observed that the consistency of color is severely inaccurate and red is supersaturation.Besides the bug I reported above, there is another thing that Adobe needs to improve. I hope Adobe can introduce a layered and graded color grading workflow, similar to the color grading interface in DaVinci Resolve. Because in either ACR or LR, once a color profile is applied, you cannot apply another color profile on top of it. This also means that Panasonic RAW files in ACR cannot have V-Log applied and then have LUTs applied afterward.

 The updates for the versions I mentioned in the title don't work. Camera Raw keeps claiming my RTX 3070 GPU isn't supported. So, I can't use it. Only version 18.4.0.0 works.Here are screenshots of the messages I receive with the latest versions. And here with version 18.6.0.0Apart from Photoshop itself, which does support my GPU:Therefore, I cannot take advantage of the latest Camera RAW features. This is unacceptable.I already submitted a bug report for versions 18.4.1 to 18.5, but without success. You haven't fixed the problem in this version.Here are the logs for version 18.6.0.0As well as those of the version that works for comparison.I also upload my dxdiag file for analysis.I even got another NVIDIA GeForce Studio driver update today, version 616.56. But it didn't fix the Camera RAW issue. So I'm still stuck on the working version 18.4. It's really frustrating 😤 knowing that I'm paying for the software.

I am seeing a significant performance regression with AI Denoise in Camera Raw 18.7 on a 2023 Mac Studio with an Apple M2 Ultra.SystemMac Studio (2023) Apple M2 Ultra, 24-core CPU 128 GB unified memory macOS 27.0.1 Camera Raw 18.7 Photoshop 2026 Sony A1 II RAW files, approximately 49.8 MP (8640 × 5760)ProblemAI Denoise on comparable Sony A1 II RAW files previously completed in under 10 seconds on this same Mac. It now typically takes approximately 15–20 seconds.I reproduced the problem by opening a Sony A1 II ARW directly in Photoshop/Camera Raw, so Lightroom Classic, its catalog, previews, and the location of the Lightroom photo library are not involved.During a recent Camera Raw Denoise test, Camera Raw estimated approximately 20 seconds. While Denoise was running, Activity Monitor showed the Mac remaining approximately 86–94% CPU idle. GPU History also showed relatively low GPU activity rather than sustained heavy utilization.Camera Raw Preferences > Performance identifies the Ap

Pressing G used to add a linear gradient mask. Now it brings up the new Grid layout. J used to apply the radial mask. Now it does nothing. What’s going on with the KBSCs? I’m not sure if there are others that have changed. The brush took, still works with K.

This is feedback rather than a question.  I have just returned from visiting a site of ancient buddhist caves in China. The delightful Buddhist statues are behind wire mesh grids for protection.  This makes photography virtually impossible. However, i took a few photos and reflection removal worked to remove the wire grid!