Questions

Hello, in Illustrator I can't save, or save as, it only lets me save as a copy but it's not comfortable to work with, who knows how to solve this problem.I've already tried uninstalling and installing again and nothing!Thank you very much in advance.

I have two paths that apparently have the same settings but they appear to have different aspects.where is the problem?the desired version is the one in box number 2. this is the source file   

I'm trying to use the Tilde key to create a shape with the Arc tool but it's not happening. I have a Mac and recently found out that the Tilde key is not Option+N as stated on many pages but actually option+a symbol key next to enter. Anyhow, even so, I cannot get the shape I wish. Is anyine familiar with this and have any ideas how I can use the Arc tool to build spirals of shapes together? Thank you.

After setting the bleeding value in the work area, it will run away when downgrading to the CC version.For example, if the bleeding left and right is set to 3.5cm, then it will become 2.54cm when opening the file again after the downturn.

Hallo zusammen,ich habe ein Problem, wenn ich in einer Datei eingebettete Bilder, zwecks reduzierung der Auflösung, in Pixelbilder umwandle. Je nachdem in welcher Ebene dieses selektierte Bild liegt, vergrößert sich teilweise der Objektrahmen auf eine Größe, alle in der Ebene liegenden Objekte. Ich hoffe meine Fragestellung ist verständlich. Nochmal zur Verdeutlichung. Ich habe z.B. eine Bild mit einer Größe von 300x300 Pixel und einer Auflösung von 300 dpi. Damit die Datei nicht so groß wird, möchte ich die Auflösung der Bilddatei auf 100 dpi reduzieren. Anstatt das Bild dann 100x100 Pixel groß ist, wird der Objektrahmen z.B. auf 1000x2000 Pixel vergrößert und die Fläche außerhalb meines Bildes (100x100 Pixel) je nach Einstallung bei "In Pixelbild umwandeln" mit weiß oder transparent gefüllt.Verschiebe ich das Bild in eine leere Ebene, passiert dies nicht und es ist dann wie gewüsncht 100x100 Pixel groß. Das Problem taucht auch erst seit ein paar Tagen auf. Vorher hat es imm

Olá pessoal, estou com uma dúvida. Trabalho com sublimação e, desde sempre, utilizo o Illustrator, mas meu computador precisou ser formatado. Depois da formatação, reinstalei o Illustrator e as cores não saem mais corretamente. Meu azul marinho fica preto, meu pink fica vermelho, meu rosa bb fica salmão ... Já coloquei perfil de cores da tinta sublimática e não adiantou. Já fiz diversas alterações, nada adianta. Alguém consegue me ajudar, por favor?

Hi,I'm getting an error message with Illustrator that says: "Can't open the illustration. The file is locked or in use."  ID:-54 (pictured below) and with Photoshop I am also getting an error (picture below) these error comes up whenever I drag a file or even try opening a file from my google drive. Someone, please help! I've already uninstalled and reinstalled several times, as well as I gave both applications full disk access on my mac book. I am using the latest version of Illustrator and Photoshop.

How to export multiple artboards at once in Adobe Illustrator using the "Save for Web" option?

Could you please suggest a suitable ExtendScript minifier and compressor with the ability to clean up comments and console logs?

Why is hebrew typing backwards in illustrator?

Hello, I'm interested to create an account with Adobe. Which specific software do you suggest for creating T-shirt designs that is user/beginner-friendly too? Also, can I sell my designs to selling platforms like Etsy, Amazon etc? And my buyers/ customers to use my designs for their physical products business like printing them on T-shirts, mugs etc (for commercial purposes)?

I don't have snap to pixel or snap to grid (those seem to have disappeared from preferences anyway) selected, but keboard increments aren't working correctly. I cannot seem to change the increment to one that is useful. However, sometimes this does work so I'm completely flummoxed about this. Thanks.

I am trying to print a custom Blu Ray cover that I made, but the printed result ends up with wrong colors, the images are fuzzy, and faint white lines that show up on the right side for some reason. I've deduced that these must be issues with Illustrator's print settings, as when I printed the same thing from Windows or Google I got the correct colors and no white lines, but the image was the wrong size (thus why I didn't just print it that way).  What changes do I need to make to the Illustrator print options/presets to get my print result to be as close as possible in color and quantity as possible or at least as good as my printer will allow? (I am using a HP Inkjet Printer, probably not the best for this project but as I stated I'm 99% sure it's an Illustrator problem.) First image is a scan of the printed result with the errors. The second image is a PNG export of the Illustrator project with correct colors and quality.

Hallo, ich drucke mit dem weißen Toner von Ghost und dem Canon LBP633cdw.Um weiss drucken zu können muss man wie gewohnt die bestimmte Fläche im Illustrator schwarz färben. Das man den Drucker so austricksen kann, ist bekannt. Da man jedoch den schwarzen Toner durch den weißen ersetzt hat, kann man nun kein Schwarz (100% K) mehr drucken. Schwarz kann man nun aber auch, wie bekannt ist, aus 100% CMY mischen. Jedoch denkt der Drucker auch in dem Fall, dass er weiß drucken soll. Frage: Wie kann ich den Drucker, evtl. auch über den Illustrator, so austricksen, dass er nur bei 100% K weiß, jedoch bei 100% CMY schwarz druckt? Ich bin noch recht neu, etwas überfragt und habe diesbezüglich auch nichts gefunden. Bisher habe ich das Blatt immer zwei Mal durch den Drucker gejagt und den weißen Toner gegen den Schwarzen und andersherum ersetzt. Da ich jedoch auch Grafiken erstelle, bei denen beide Farben übereinander liegen, ist dieses Vorgehen mehr als blöd und führt zu U

I saw a video of how to use Generative Recolor on line art, but that line art seems to have been made in Illustrator. Can Generative Recolor be used on hand drawn line art (black ink on paper) that is scanned and imported into illustrator?

Remove the old menu system where you have to actually know the exact name in thousand menus and let me type the exact thing in like it is already been for years in After Effects and Premiere Pro.Here is the link for the uservoice page if anyone else feels this should be done: https://illustrator.uservoice.com/forums/333657-illustrator-desktop-feature-requests/suggestions/48937088-update-the-keyboard-shortcut-system-and-let-us-ass

Hi,Anyone who knows how to quickly find open paths that need to be closed? I'm working on a project with many objects and over hundred open paths. The tutorials with plugins and scripts I can find no longer work.Thanks so much.

Can anyone tell me what the heck is going on here? When I try to save a graphic into my CC Library, the graphic is saving with a portion of a completely different AI file. I'm using Illustrator artboards as an area to create simple graphics to import into InDesign. I select this simple white icon below (moved off the white artboard now, just so you can view it), Click add graphic to the CC Library, and then it saves with that weird stuff from a project I did months ago behind it. What the what?

Hi! I just finished a collage in Illustrator, and I want to create a stop-motion style animation where the items in each layer appear sequentially with even timing like they do in the reference video (attached). What's the best approach to accomplish this in Illustrator or any compatible tools? Any tips for exporting or setting up the layers for animation would be greatly appreciated!

I"m still learning best practices with color profiles, and just discovered this glaring deficiency in Illustrator. The default setting when saving out a pdf ("Illustrator Default" preset) non-destructively preserves all other Illustrator editing, but has a destructive setting by not including color profiles. I think this should be reversed, or at least allow the user to edit the default setting so profiles can be preserved.

When I open some Illustrator files, this weird pixelation shows at the top of the designer, as you can see in the image. It changes when I move my mouse. I don't know if it's an issue with the file, but I've tried exiting out of Illustrator and reopening the file, but it still appears. It there a way to fix this?

How can I exit out of this tool?

  Hello everyone,    We're excited to announce that Adobe Illustrator's latest update (version 28.7.1) is now available for download via Creative Cloud Desktop. This release introduces an enhanced Contextual Task Bar, support for Japanese, French, and German languages in Retype, and other enhancements inspired by your feedback! You may also visit the links to access comprehensive lists of all the features and bug fixes that are available. Update the AppTry out the Latest Features and Enhancements in Illustrator!  Update Illustrator Enhanced Contextual Task Bar The dynamic and improved Contextual Task Bar brings the most relevant actions directly to your workspace based on the object or tool you've selected, enabling you to achieve your creative goals more quickly. This feature helps you explore various creative possibilities from a blank canvas and discover exciting workflows tailored to your selected object, whether it’s a pat

As you can tell, the screenshots below show what happens when I attempt to rearrange the artboard.I believe I was able to rearrange it once, but I had to reorganize the pieces so the first screenshot after the first rearrange looks ok.I was able to resolve some of the problem by "grouping" the artwork on each artboard as a workaround. Now, I can just move the entire artwork if it goes off the board. But before it was worse because a few elements would go off the artboard but some of the artwork would move along with it."Move artwork with Artboard" is checked on all of the properties.I believe this might have to do with "Alt + Moving" to duplicate an artboard might be part of the culprit, but not quite sure.