Questions

Hallo,ich arbeite an einem Film mit Stop-Motion-  und Realfilm-Szenen und möchte ihn mit Adobe Premiere Elements 13 bearbeiten. Die Realfilm-Szenen sind in HD mit 50fps aufgenommen, die Bilder mit 3840 × 2160 Pixel . Um einen Qualitätsverlust vorerst zu vermeiden habe ich de Einstellung "PAL-ACVHD-QFHD 16:9 50" (3840 × 2160 Pixel und 50 fps). Wenn ich das Projekt dann als Film exportieren will habe ich folgendes Problem: Ich wähle die Voreinstellung von ACVHD "MP4-H264 1920x1080 30" und will die dann entsprechend anpassen (auf 3840 × 2160 Pixel und 50 fps). Dann kommt allerdings folgende Meldung: "Ungültige Framegröße/Framerate für diese Ebene. Veringern sie die Videogrenzen bzw. die Framerate oder erhöhen Sie die Werte für das Profil bzw. die Ebene. Versuchen sie es anschließend erneut.". Was muss ich tun?Danke schonmal im Vorraus.

I've been having a problem since I installed Premiere Elements with certain clips. It seems to primarily be with longer clips, although it does occasionally happen with shorter clips. It may have something to do with file types or codecs, since videos of certain file types don't seem to have these problems, but multiple file types have had the same issue. I don't know exactly how to describe it, the videos run fine normally, but when imported into Premiere Elements the video, but not the audio, suffers occasional glitches and hiccups. Points in the video will skip back a few frames, while the audio keeps running forward as normal. Oddly, despite it usually showing up in longer videos, it shows up even in the first few minutes of those videos. These glitches can occur several times a minute, and while they are only a few frames of desync each time, the errors are so frequent that it is virtually impossible to maintain audio consistency throughout the video.Note that this isn't just a pl

I use an SSD so I try to keep data files on a secondary hard drive.  I haven't been able to figure out how to move the location it stores it's data files.I'm a new user of Premiere Elements 2018 (not pro)

Use the same font for all my video texts...is there a way to set a default size and font and streamline that process?

I uploaded a video that I created with Adobe Premiere Elements 2018, to utube.  It worked fine before I uploaded it.  I went to utube to watch it and the audio was gone for the entire thing.  I had my headset still plugged in while I was uploading it, could that have taken away the audio?  How can I fix this?Discussion branched!

Halloik heb adobe premiere terug geinstalleerd op dezelfde computer zoals voorheen,nadat ik win.10 er had opgezet.Volgens adobe premiere is er te weinig systeemgeheugen.op C schijf is 230 GB vrij op D 220 GB ,ik heb geprobeerd alles op te slaan op N = 4 TB om mijn andere schijven vrij te houden zelfde probleem.wat te doen?HeyI installed adobe premiere on the same computer as before, after setting up win.10.According to adobe premiere there is too little system memory.on C disk is 230 GB free on D 220 GB, I tried to store everything at N = 4 TB to keep my other disks free same problem.what to do?[title edited by mod]

I would like the volume of my narrations to be audible without people having to increase the volume on their computer.  I moved the microphone sensitivity to max and the volume is still barely audible. I'm a new user of Premiere Elements 2018 (not pro)

I'm overwhelmed by Premiere Pro so I just downloaded the trial of Elements. In Elements 15, I'm wondering if it's now possible to export a 1080x1080 square video (for use on Facebook or Instagram)? I'd like the video to actually be cropped square, with no letterboxing or black bars on it.Searching the forums, I have seen mixed answers on previous versions of Elements.Thanks for your help!Jess

I've downloaded the Premiere Elements 12 trial version to see if I should purchase - I imported a clip but it won't play - I am running an Intel Core i-7 6500u CPU @2500GHz - 12GB RAM - 64 bit  -any ideas? Thanks!

Panasonic camera HDC SD60 is generating ".mt2s" files. They can be processed with  HD Writer,a video editor that was provided with the camera but having rather poor functional possibilities.I would like to do video editing with Adobe premiere 2018. The import accepts those files. However the quality is not what it should be comparing to the rendering in HD writer, or connecting the camera to a TV. Videos are twinkling - very tiring for the eyes.How to import those files without loosing quality.?Thanks

hello i try to install software but can't finish just say err

Have a windows 7 Lenovo T430 laptop with plenty of resources of all kinds, fully updated - windows, drivers, etcOver 4 years experience using elements products (photoshop and premiere) - and all the scars learning the sequences to avoid most crashes.Started a new project after 6 months of not using the products, found Photoshop Elements 11 still working fine, Premiere Elements 11 refused to open - after multiple restart in every combination of holding shift key, direct from exe, starting in safe mode, and what seemed like endless uninstalling/reinstalling . Used CC Cleaner and worked thru at least 20 forum discussions. Was surprised how many "fail to open" discussions, some going back 4 years or more, remain unanswered. Tried most things but refused to mess with Registry stuff.Gave up, uninstalled both "11" family products, purchased Elements 2018 family and installed with serial numbers.Now, neither program with start - Organizer splash screen crashes at "loading Media Core components

HelloI have been watching this video which uses Premier Pro and am hoping that the same can be done with Premier Elements 2018?!CheersGeoff

I've been editing an Adobe Premiere Elements 14 .prel file. Now when I try to open it it will not load past 88% (varies between 75-88%). I've opened it a few times after saving and closing out and it worked fine. I've checked the computer and there is plenty of space. Any suggestions?

I'm running PE14 on Win7\64 and am only a stumbling amateur.My backups folder is getting large, so I'm exploring how and why it is used.Although I did play with videos today, I did NOT open the program or do any project.That was yesterday.My question:  How can I have a backup today?How can this backup be dated with a time stamp hours in the future?My system clock correctly says 3:43 PM, and the newest clip is stamped 8:27 PM.Why would PE be active if I did not open it today?  How can I stop creating backups?I'm considering deleting the whole folder, since my workflow is create and discard the video work once distributed and I only keep the original media created by the camera.Sorry about the multiple inquiries, I hope I'm just confused about a basic concept and can understand what's going on.Thanks in advance,Mike LeDuc

All of sudden this program started crashing. Can I have some one fix it or send me the latest version please?

Hello All. I am using Premiere Elements 18 to make a video from my vacation pics. I added music to enhance the video, and I'd like to have the music fade in several places. I know how to get it to fade, but I'd like to change the default setting to make the fade longer. I've looked through the settings, but I can't figure out how to change the default. Does anyone have any suggestions? I know that I can manually change the timing of the fade, but I'd rather not do that.

why is my cropping off center after I save. I am cropping a video over another and its 30 % off??

Ich bearbeite schon lange mit Premiere Elements 15. Beim aktuellen Projekt kann ich den markierten Clip über die Werkzeugleiste Lautstärke nicht bearbeiten. Lediglich im Audioclip direkt lässt sich der Audio-Balken verschieben. Allerdings muss sofort gespeichert werden (Speicheranzeige läuft nur bis ca. 40% durch), da danach das Programm abstürzt. Nach Neustart ist dieser Clip geändert. Was kann ich tun damit die volle Funktion widerhergestellt wird?

HelloAs in Adobe Premiere Elements 2018, play the movie from the last frame to the first. Standard rate.I have recorded how someone gets up from a chair. There is a lack of scene as this person sits on a chair.If the recorded video will be duplicated and the part doubled from the last frame to the first, then I will get the missing part of the movie.I found an effect that changes the tempo and additionally records the sequence: forward, backward, forward. This effect is too difficult for me. The forward tempo is padded and you also need to shoot the moment when the movie is played back and the movie clipped.There is something simplistic? So just backwards at a normal pace without a loop - front, back, front?

Tools are on the right. One of them is a button with a note. After clicking it, I'm empty.Is there any chance there should be some kind of music that can be used as a background film?If so, how do you upload it or how to download it?I have Adobe premiere elements 2018.

as in Adobe Premiere 2018 get the effect - in the crowd, mark a red ellipse person, which is worth noting?Or, on the film scene, mark something that is worth paying attention to while watching a movie?

I have Adobe Premiere Elements 2018 on Imac desktop. (10.13.6) -   When attempting to export my video photos, audio and text, I am getting message "Shake reduction is in progress or has encountered an error."  (in frech: Le processus de reduction des tremblement est en cours ou a rencontré une erreur) - So I don't know what to do to fix it - I can't export my video. Can anyone help ?Azim Mitha

I bought Adobe Premiere 13 in 2015. It worked perfect.Since a few days I have a new laptop and installed the program.Because the new laptops don't have a dvd burner build in, I wanted to make an ISO file.When it was burning, the program frooze at 24%.Is this a common problem? Can I still use the program with my new laptop. It runs on windows 10.I hope there's a solution for my problem.

I would like to change the dimensions of a screen video of an iPhone and keep it's proportions. Basically I need to make it bigger.I am a real beginner. Is this even possible with Premiere Elements?