Questions

I'm using PE14 to convert MOV files (from iPhones) to M2TS files (generated by Panasonic video cameras and edited by HD Writer AE 3.0 supplied with the camera). I have tried a few options but the files created by PE14 will not open in HDAE3. I have tried M2T - H.264 option in PE14 "Export and Share". The files created don't have the .m2ts extension. Renaming the files to that extension did not work. By the way, the codec info in VLC media player for valid M2TS files from my Panasonic is as follows: Video: H264 - MPEG-4 AVC (part 10) (h264) 1920 x 1090 59.94 fps Planar 4:2:0 YUV Audio: A25 Audio (AC3) (a52) 48000 Hz 384 kb/s How do I convert Quicktime MOV to the above format?

When i start the audio mixer to control the Loudness the program doesn´t work any longer. I have more then 1000 clips in the project. Is this too much??

I backed up my videos and am now using an external hard drive for storage and moved all my stuff to that drive. How can I make the video automatically find all the files in that location?

how do i import sony digital 8 over firewire into premiere elements?[Moved by moderator to Premiere Elements Forum]

Struggling with this software right out of the gate.  I am in Organizer on the Media tab.  I have my folder structure on the left set up as "View as Tree".  I am going down my tree, looking at media and when I find a good video, I want to add to a Album I have created so when I have all my files picked, I can go create a movie.  You would think I could just right click on a media file and select "Add to Album", but I don't see any option to do that. I can't drag the file to the Album because I am in Folder view, looking at media for god's sake.  That's what you do in Folder view, right?  In an organized way, you look in your files and look for media.So I am lost as to how you can easily sift through hundreds of media files to find your material to make a movie with this software...Ok, that's my rant.  Are there any moderators present.  I am happy to be called ignorant!

I am trying to import downloaded icloud video (.mp4) into Organizer. I can directly import to Premiere Elements 14, but cannot get them into the Organizer. I get an error that the file is either already present (it cannot be found) or it is not supported. Thoughts? Thank you.

I was looking to buy a 4k camcorder, and saw that the * info said that Premiere Elements 15 is compatible with the Sony AX100, but I am not sure what that means? As they both record in the same format, so does anyone know if I can edit footage from the AX33 4K with Premiere Elements 15?

I used elements 14 to a video I took on a sony 4k action camera . I used auto tone correct and slow motion . the video looked great in the editor but when I exported it to my computer at the highest quality 4k and I played it back it looked very pixelated especially the blue sky looked horrible . my computer is hd 1080p but I wanted to capture the highest quality possible to watch on my 4k tv . is it my computer or did I do something wrong with editing or something.

The video file I am working with is a "Move Clip"; the file data said the frame size is 704 X 480, and it is a standard definition video.  When I load it into Premiere 13 for editing, the video views with the right side cut off.  When opening the project in Premiere I chose standard definition which said the frame size would be 720 X 480.  When I tried publishing the edited video in standard definition it still plays with the right side cut off.  How can I stop Premiere from loosing the right side of my video?

Hi all!I'm running trial of Premiere Elements 15 on Mac. This is first experience in this software. I need to change frame size (rotate to "portrait") but this option is disabled. Is it caused by trial or not? What to do?

Can I merge tracks from one project into another project?  Without having to render it out and re-import it, which would degrade the quality.  I Haven't found an answer in the manual.  This is easy in Sony Vegas, but I'm new to Premier Elements.  This should be a rather-common function for working, in segments, on a larger project.  I need help on this ASAP.  tx .

Using Premiere Elements 15 under Windows 10, how can I determine if my graphics card is being used?  I know I saw a menu option on my Mac, but can't seem to find it in the Windows version.-Thanks

My computer came with Adobe Elements Premiere Elements Version 12 But my computer was hacked and had to be wiped clean.  How can I recover my product?[Moved from Photoshop Elements to Premiere Elements... Mod]

I use Adobe Premiere Elements 7, it just went into an update.  Now it is asking for a lock code, when I copy the code it asks me to do and then click on the website, I get a messaged that the page is no longer found.  I need the lock code to be able to make a couple of DVD's for the office.  What can I do to get this code.Thank youTeri

Oh, I hope someone can help. My sanity is at stake here...PSE14, Windows 10.Expert mode. AVI files from my game camera. They import and play fine on the timeline and preview/clip monitor.Problem: I need to trim the first four frames from each clip. No matter how I trim each clip, when I play the timeline the clips revert to untrimmed. What I have tried: In preview/clip monitor I advance four frames and set the IN point. Right-click and select Insert to add pre-trimmed clip to timeline. On the timeline the clip appears to be trimmed. I repeat for remaining clips. When I play the timeline the clips are no longer trimmed. I have also trimmed by dragging from the end of each clip on the timeline. All clips appear trimmed until I play the timeline and they are no longer trimmed.I have also trimmed each clip on the timeline by advancing four frames and splitting, then deleting the unwanted four frames. Same story, all clips appear trimmed until I play the timeline and once again all clips ar

I have an older project that was made with Photo Story 1 and have it saved to an WMV file. I am finding that it will not play on some DVD players. It will play on a computer. Can I either Convert it to a file to burn it to a DVD so that it will play on older DVD players? (I did Google it and it seems like there are some downloads to be able to do this but am hesitant to download a 3rd party offer)Or is there a way to take the movie that I have burned to disc and copy it and reburn it in a format that will play on all DVD players?Thanks

Hi,I want to render video in .mov format but all the presets in Premiere Elements 10 are set to 720x480 frame and in Advanced settings I am not allowed to increase frame size. And I cannot find any way to create my own QuickTime preset there. Is there any fix for this? What's the use of a low quality output like 720x480 anyway?Thank you

Hi,Im trying to copy+paste amharic writing into Premiere Elements 12, but it can't read the symbols (there are only squares with crosses appearing). I've already downloaded an amharic font (Keyman for Amharic | በአማርኛ ይጻፉ), so I'm now able to type amharic letters, but it doesn't work in Premiere Elements. I've seen that there are websites to change arabic letters into a format which can be read by Premiere, but I couldn't find anything similar for amharic writing. Does anyone have an idea how this could work?Thank you for your help!

The directions/help say that I should see a dialogue box when I open a new project, and the directions follow from there. However, I see no dialogue box. The project opens, and settings at that point cannot be changed.[Moved from non-technical Forum Lounge to specific Program forum... Mod][Here is the list of all Adobe forums... https://forums.adobe.com/welcome]

I currently am using premiere elements 14. When I output my 1080 p 60fps video to a blue ray disk,  my only option is interlaced at 29.97 fps. If I upgrade to version 15 can I now burn 60 fps @ 1080 P? Thanks for a quick response.

win10 64PreEl10MP41280x72060fpsdata rate 9903 kbpstotal bitrate 10031 kbpsaudio: 128 kbps, stereo, 48Khzwhat would the best project settings be to get the best rez out of this?thanks,gene

[Moved from non-technical Forum Lounge to specific Program forum... Mod][Here is the list of all Adobe forums... https://forums.adobe.com/welcome]

Anyone know where I can get training for Premier elements 14/15 in the UK preferably North? Thanks

Hello,my production is ready ( not too large) but when i wonna write this , my computer shut down.

I would like a refund to my account please hoovey1969@yahoo.com for both Adobe Premiere Elements 14 and for Adobe Premiere Elements 15.Over a year ago, I purchased the bundle for Adobe Premiere Elements 14 and Adobe Photoshop Elements 14.  I have been with Adobe since about release 4.Unfortunately, with Adobe Premiere Elements 14 I never successfully could export a video.   I had recently recovered my system after a crash and started over in my environment setup.  I gave up after searching online and trying different ideas and went back to using Adobe Premeire Elements 11 without issue.   I occasionally would see the "red" in preview, and I would almost always get "error compiling movie. unknown error." whenever I do a project.I have recently now been having issues with Adobe Premiere Elements 11 with the imported videos some coming in as a 1440 x 1080 size and somem coming in as 1920x1080 and having to manually resize them all.  It is a pain so I fin