Questions

I have recently installed version 23 - where is save to disc in export and share?

Unfortunately, APE2024 still  has a problem with Cross Dissolve and Film Dissolve transitions when woring with HEVC files.Sometimes Cross Dissolve transitions are not visible in the output rendered video even when they are properly visible in the monitor window. However, sometimes everything is fine and Cross Dissolve are visible in the output. I have no idea what it depends on… I’ve just wasted more than 1h of rendering since the Cross Dissolve simply disappeared from my output file. APE has problems with Cross Dissolve at least from version 2020 and they haven’t fixed it yet ☹Cross Dissolve transition not working with HEVC fi... - Adobe Community - 11218109 I want to stress out that other transitions (I testes many of them) seem to be fine when working with HEVC.  Only Cross Dissolve and Film Dissolve are causing problems.

I have full version of Adobe Premiere Elements 2024. GPU acceleration if enabled, still I can see the yellow line above my first clip just after importing it and placing on the timeline. I don't understand why.  I have also APE2021 and there is no yellow line (no need to render) above the same clip.  Is there any issue with APE2024 GPU Acceleration? Here it is video showing that problem: https://youtu.be/dahkr1rxZ40  

Hello everyone,I've recently started using Adobe Premiere Elements for video editing and I'm thoroughly enjoying the experience. However, I've encountered some performance issues, especially when working with high-resolution footage or complex projects. I'm looking for tips and best practices to optimize the performance of Premiere Elements on my system.Hardware Considerations: What are the key hardware specifications (like CPU, GPU, RAM) that significantly impact the performance of Premiere Elements?Settings Adjustments: Are there specific settings within Premiere Elements that I can tweak to enhance performance, such as preview quality or rendering options?File Management: How does the organization of video files and project files affect performance? Should I be storing my files on an external drive, or is the local storage preferable?Plugins and Effects: Do certain plugins or effects put more strain on the system? How can I use these effectively without compromising performance?Rend

When I want to save a freeze frame via the Export function, I usually choose the bmp format. When I then check the ppi of the saved image, it shows as 96 ppi. How can I change the ppi to 300 instead of the 96 ?

I have recently upgraded from Premier Elements 2021 to 2024.  I have for some years completed projects which are videos of our safari holiday – some of which are 90 minutes long.   So I always export to a DVD – up until now.   To say the least I am very disappointed that the developers have decided to remove this feature from the 2022 version (which I was unaware until my contact on the chat line recently.   I was told there was third party software which could provide a DVD copy – but I have searched the web and tried numerous products, but none will recognise a .prel file.   So I cannot transfer to a .iso file for a DVD burn.   The options for export are now limited (for me) and even a TV export version of .mp4 file will not work on my TV.   So I am left with only the computer to view my Safari Projects or I return to my 2021 version – that is certainly progress and a waste of money.   So if you can help with

When the freeze frame option in a video is opened and I choose the export, instead of the 1920 x 1080 dimensions of the video in the project itself, the exported picture is smaller in width, at 1440 x 1080.  Is there a way to make the exported pictures be 1920 x 1080?  

Hallo, nach Schneiden eines Clips und Entfernen des nicht mehr benötigten Abschnitts mit der "entf"-Taste wurde die Lücke bis vor kurzem immer automatisch geschlossen. Ich verwende Adobe Premiere Elements 2020. Jetzt muss ich jedes Mal durch Drücken der rechten Maustaste "Löschen und Lücke schließen" bestätigen. Wer weiß, wie ich das automatische Schließen wieder erreichen kann?Gruß Wolfgang

Hi, I am trying to save a video I made to an iso image so that I can burn it to a dvd.  But for some reason, everytime I export the video to an iso image, the picture appears very fuzzy when I play the saved video.  I don't know why it keeps doing this and I'm not sure how to fix it.  If anyone has had this problem and knows what to do, please let me know.  Thank you!  

I’ve noticed very strange behaviour of Adobe Premiere Elements 2024 which looks like some bugI just want to delete audio track of one clip on my timeline. Nothing more. Just delete it. However, I can see that deleting the audio track leads to shift of all video clips on the right. This is something unexpected and unwanted.Please see that video which shows the problem: https://youtu.be/w1nuMC-8qjEI know how to do that in other way but it seems that something wrong is happening here.

This is almost certainly some sort of caching issue, but what happens is that my timeline has a clip with the same file name as a video imported into the project assets earlier in my editing. However the timeline version when editing is display parts of two completely different video clips. I have doe the following but so far it has not fixed the problem. I removed the clip from the project assets and the timeline and shut down elements. I went into the cache folders on my Windows machine and deleted all cache files. I emptied the recycle bin. I even restarted my computer. I then went into the folder where the original file is and made sure it was correct (it is). I renamed this file by adding the txt  "_FIXED" to the end of the filename. I then opened Elements and imported the file back into the project assets. This was then dragged onto the timeline. When I run that clip again, it is still displaying the video from two different clips. Remember, I verified that the file I rename

J'utilise Adobe première éléments 14 depuis 6 ans pour le montage de vidéos tournées sur cameras GoPro.Tout fonctionne bien jusqu'au jour où j'ainacheté une nouvelle GoPro 11.Je n'arrive pas à importer les vidéos de cette nouvelle camera dans Adobepremière éléments 14 .A chaque tentative, le message suivant apparaît :  le module d'importation a signalé une erreur générique".Je ne trouve pas de solution.Les fichiers vidéos en provenance de la Go Pro 11 sont codés GX01xxxxx.mp4.Les fichiers en provenance des autres caméras que j'ai possédées sont codés GH. Quequ'un peut-t'il me conseiller et dépanner.

No problem when editing 30 FPS projects, but on FPS projects, video studders badly.  I have a gaming PC laptop with Nvideo Gforce GTX1650 graphics card, I7, solid state drives, etc....  All drivers up to date.  I have changed default audio input to none in Elements.   I've cleared the cache.  I've Googled this a lot and cannot find a cure.  I'm using Premiere Elements 2021.    Any help would GREATLY be appreciated.Specs of computer:  Device name Mark-AsusLaptopProcessor Intel(R) Core(TM) i7-9750H CPU @ 2.60GHz 2.59 GHzInstalled RAM 32.0 GB (31.9 GB usable)Device ID 75E7D9D7-A8B9-4AB1-AD83-BA68D6AA1ADAProduct ID 00325-81929-35417-AAOEMSystem type 64-bit operating system, x64-based processorPen and touch No pen or touch input is available for this display

Hi Adobe Premier Elements Community,I have used a desktop ACER in the past to edit videos using Adobe Premiere Elements with great success. However due to a crashed HDD I decided to upgrade to a laptop, Acer Swift GO 16. I also upgraded my software to Adobe Premiere Elements 2023.Whilst I can run PE 2023 when I load any media, say a 10 second GoPro video, then press play within the software I can hear the progress of the video playing through the speakers but the display does does not keep up and locks after playing about 3-4 seconds.Any suggestions on whats happening?The investigation I did before purchase of the Laptop suggested to it being very suitable for video editing. 

Hello EverybodyI suspect an uncompatibility of PE9 V 9.0.1 with W11. Of course, it is an old version, that I used tu run on W10 , but the computer is now very slow, and I changed for un newer machine. I have serched if there is a known uncompatibility and I finded nothing. So, I tried the installation on a first machine an Asus. No problem during the installation up to the final reboot which crashed all the computer with neither boot sequence nor windows starting. I had to leave the computer in the shop, as they could not restart it, and i changed the model for an LG 17Z90R. A very similar scenario occured after the installation, except that I could restore W11 but a "small bug" appeared. One of the USB port of the machine was affected: only USB keys were recognized and not other devices as hard disk, CD/DVD reader. I came back to the shop where they tried to veryfy the USB drivers, but got no succes. They will return the computer to the constructor, so, I asked for

I have a big problem with the 2022 version as it removed a bunch of my favorite features from the old versions.  Historically (v2012+/-) I would make my "signature" family/event slide shows starting in the "slide show" creation option.  It would allow me to add media and them import into the slide show creation in a random order and it would provide the ability to view all the pics and allow the ability to see a directory of all the pics and one-off reorder the pics .  Then once I had all the pics in order, on the timeline I could add effects to each pic or group of pics or all pics veary easily.  In 2022 none of these features are available - it has their canned slide show choices.  I really miss those capabilities.    But the biggest loss is the ability to add Pan and Zoom and to tweak specifically where the P&Zoom on the pic goes.  The Pan & Zoom feature in 2022 is super clunky and cannot be tweaked or applied across multiple pic slide

Get "Placeholder page for LoW Migration" No idea what that means

HelloHow can I make a justment in audiotrack (music) on a specific place in the musictrack to increase the music after end of a narration and I want to have a higher level of the music, and later on decrease the music when the naration begins again. I know that a yellow horizentally line can move up and down to change the level, but I want to mark on the wantet place to make a dor from where I can increase og decrease the soundlevel. How is the procedure to make that dot on the yellow line?Knud

I re-installed W10 which deleted my ADOBE PREMIER elements 2020 app. Ive been to the ADOBE website and cannot find a download section. Anybody know how its done?

Error message when trying to import MOV files recorded in H265:  "Your system needs to be configured to import HEVC or HEIF type of media.  Click on 'Learn more' to know how to enable these formats for import." That takes me to this page:Using HEVC and HEIF media on Windows (adobe.com) I followed the instructions and still have issues with the import into Premier Elements v21 (2023) .  I have no issues playing the MOV files in Windows media player.  Need assistance in fixing, thank you. Computer: Windows 11 with Nvidia GeForce RTX 3090 

Have edited a longer video, as before, but have problems finding how I can export the finished product, when I want it to end on my harddisc (still) as a MP4-file.

Can someone please explain to me how to remove the black bars left and right in my video project? I have already tried it with the scale function and the crop effect. Unfortunately unsuccessful...

HalloIch bin kein Profi, habe aber schon viele Filme mit Adobe 12 und 2020 fertiggestellt. Es hat Alles bestens funktioniert. Jetzt will ich ein neues Video mit 2020 machen und habe plötzlich folgendes Problem. Wie bisher werden Aufnahmen über "Medien hinzufügen" und "Projektelemente" ins Schnittfenster gezogen. Allerdings geht das jetzt nicht wie bisher über die Spuren Video 1 und Audio 1  sondern es werden zusätzlich 5 Audiospuren belegt. Auch wenn ich zuerst die Leerspuren lösche werden immer wieder weitere Audiospuren geöffnet. Auf einem zweiten Computer mit Adobe 12  und identen Clips sind  nachwievor  nur die Spuren Video 1 und Audio 1 belegt. Bitte um Hilfe für die Lösung dieses Problems. DANKE

I cannot export my clipped videos.  Each time I try, the program runs, but at the end when it says SAVING, I get an error message that an error occurred, and the video is not saved.

My audio and video play in sync but the audio track is sudenly 6 min 57 sec out of sync at 7 minutes into the video (the waveform does not match video). It appears the audio track waveform starts over at about the 7 minute mark but it does not represent the actual audio. I copied a section of this visually repeated audio and pasted in the narration track at the beginning of my video where the wave form matches the Audio 1 track and it is completely different audio. I have restarted Premiere and restarted computer. Started a new project and get he same result.