Questions

Hello, I am to edit something that will be shot overseas. These are the options they gave us for what they can stream/record in: DNxHD 220x, DNxHD 220x MXF, DNxHD 145, DNxHD 145 MXF, DNxHD 45, DNxHD 45 MXF for 720p and 1080p HD formats up to 60fpsDNxHR HQX, DNxHR HQX MXF, DNxHR SQ, DNxHR SQ MXF, DNxHR LB, DNxHR LB MXF, H.265 SDI 4:2:2 10‑bit, H.265 High 4:2:0 10‑bit, H.265 Medium 4:2:0 10‑bit, H.265 Low 4:2:0 10‑bit Which of the above options is best for these delivery specs?: MXF OP1a, XDCAM HD422 1920x1080i at 29.97, 50 Mbps CBR, long GOP (12 frame) Any help is appreciated, this is the first time I've dealt with something shot in this manner. Thanks everyone.

I had some issue with masking at the newer version of premiere pro which :1. Keyframe won't show up 2. I want to create masking transition but the under layer is showed up even I did maskin expansion, so weird. I do never understand with adobe premiere, they was never get stable even at the newer version.so dissapointed with that.

Quelqu'un pourrait m'aider 

am using the latest version of Premiere Pro, and there is a recurring issue with the Transform effect, particularly when I set the Motion Blur value to a high number (360). This causes a render error both in Premiere Pro and Media Encoder.Upon testing, when I lowered the Motion Blur value to 0 or 290, the render completed successfully and very quickly, which indicates the issue is specifically related to high Motion Blur values in the Transform effect. In previous versions of the software, this effect worked without any issues.Computer Specs:Graphics Card: NVIDIA RTX 3060 (12GB VRAM)RAM: 128GBProcessor: [Insert your CPU model here]Operating System: Windows 10/11 (Specify your version)Troubleshooting Steps I Have Taken:Updated my GPU drivers to the latest version.Lowering the Motion Blur values to lower settings (such as 290) resolves the issue, indicating that the problem lies within the software itself.I would appreciate it if you could look into this issue and fix it in a future upda

I have been trying to set the Camera Angle/Label for several clips in the Metalogging workspace, selected all clips and set it as Angle A. It is instantly reflected in the project panel. However, the camera Angle and Label columns are now floating above other columns while scrolling left or right in the project panel.I cannot get rid of these columns even if I deselect them from the metadata display. Changing workspaces also didn't fix the problem. Premiere Pro Ver 25.0MacBook Pro 16" M1RAM 64GB - Storage  2TBSonoma 14.7  

Hallo liebe community, ich bin gerade bei einem Video zu bearbeiten und beim Color graden habe ich immer das Problem, dass ich während des Standbildes und der Wiedergabe in den grün und pink tönen andere Farben bekommen. Mein Video ist während des Stand Bildes richtig eingestellt und sobald ich auf play drücke wird es leicht grüner. gibt es hier irgendeine Lösung? Schönen Gruß Patrick

"Paste insert," when used at the beginning of a timeline, inserts a space at the 2nd edit point while overlaying the clip at the location of the cursor. "Paste Insert" seems to work as expected when the cursor is at any other point in the sequence. Steps leading to bug-1 command + c to select a section of video in a different sequence2 move the cursor to the beginning of the sequence 3 shift + v (Paste Insert) *edit seems only to be an issue if the copy is from a different sequence and if using an in-and-out selection (vs an entire clip) What should have happened is that the clips is inserted, and the rest of the sequence ripples  what happens if a gap is created at the next edit point, and the clip is pasted without the insert at the location of the cursor? (insert video here also not working)https://vimeo.com/1037442903/f854b59ecc As you see, I have V1 locked; I get the same result when it is unlocked. PP25.0Mac OS 14.7iMac Pro 2017, Intel

ALguien sabe donde puedo descargar una version de premiere pro compatible con Big sur 11.7.10

A bug occurred while editing with multicam in Premiere Pro. There were two camera angles. One was from above and the other was a camera filming me.  After making the multi cam on the upper angle camera, zoom entered and it shows closer and I don't want this, how can I fix it?  

I'm running Premiere 25.1 on a M1 MacBook Pro with Sequioa OS.The nature of my editing is that I am constantly saving assets to different locations from Premiere into my integrated Dropbox folders.I spend a huge amount of time navigating to the correct folder for saving, because the needed file path is constantly changing.Is there is way to create a one-click shortcut to say, 5 different folder locations/file paths when saving assets? This might be more of a Mac OS question but I thought maybe Premiere had some feature that could accomplish this?

こんにちは！motionvfxで購入したプラグインをPrに読み込む方法を教えてほしいです！「ウィンドウ」の「エクステンション」からインストールしようとしたのですが、「エクステンション」がクリックできない状況で困っています。。。

I am having a problem with my audio. Whenever I make changes to an audio track (denoising, desser, etc.), it sounds weird at the beginning of each clip of audio. The glitch makes the voices (editing a talkshow) sound muddled and there's almost this static type noise. After about a second, the audio goes back to normal. When I export, the audio glitch is built into the export. What has been a temporary fix is to play the glitchy audio back a second time. For some reason, the audio glitch only happens on the first playback of the clip. So in order to export a non-glitchy export, I have to playback the entire video before exporting. Details:Adobe Premiere 25.1.0MacBook Pro 2021, 16 inchApple M1 Max chip32GB RamMacOs Sequioa 15.1.11TB Hard Drive Editing off of Seagate External Hard Drives into USB-C port. Video Source:Type: QuickTime MovieImage Size: 1920 x 1080Frame Rate: 24.00Source Audio Format: 48000 Hz - 24-bit - StereoProject Audio Format: 48000 Hz - 32 bit floating po

Premiere pro 25.1.0 build 73Windows 11 23H2Add a clip to the timeline > right clickshow clip keyframes > time remapping > speedAdd a keyframe at 10 seconds on the clip > set to 300% > drag keyframe extent ramp up time.Add a second keyframe at 30 seconds > set to 100% > drag to extend keyframe ramp down time Add gausian blur to clipadd blur keyframe at  8 seconds 0% > second keyframe at 10 seconds 100%third keyframe at 20 seconds 100%, fourth keyframe at 25 seconds 0%expected result: clip speeds up at 0:10:00 for 20 seconds then slows down, blurs at 0:10:00 seconds for 10 seconds then unblursactual result: clip speeds up at 0:10:00 for 20 seconds then slows down, blurs at 0:10:00 seconds for 3 seconds then unblurs too early Project attached of only that. Similar behaviour with using Scale instead of blur. (Can't include source video, as too big)  

Running 24.6.1.  No Dialogue error with using Transcribe function. Track isn't muted. It plays and I can hear it. Tried other clips that do work and here are the differences: Transcription DOESN'T WORK when using clips with this audio. Clip is 59.94 and Sequence is 59.94.Transcription DOES WORK when using clips with this audio. Clip is 23.97 and Sequence is 23.97.Is it because the audio is Compressed? 

Expert in FCPX but having to use PPro for working fast with Tircaster SHQ sources.  Finding many metadata/logging/organization aspects are considerably better/faster in FCPX; eg, keywords, smart bins, etc.   My current frustration is trying to see some indication in the Source monitor which portions of the clip are used in the current timeline.  In FCPX there's an orange bar in the source clip that indicates this.    Is there anything similar in PPro?  Needs to indicate a range of the clip that was used, just the flag that it was "used" isn't adequate.  Thanks!  

version 25.1 on Mac. OS 14.7.1 starting a new sequence. I load the source into the source monitor, select in and out points then try to either insert or overwrite. nothing. The only way currently to start the sequence in this new version is to drag from the source monitor into the timeline.

Boa noite, agora que já não é possivel a opção de "escrever" no video effects, como é que se consegue fazer linhas animadas no Premiere Pro?Obrigado

bonjour,depuis plusieur projets j'ai un sorte de panneau avec des données devant ma prévisualisation, je n'ai aucune idée ni du nom ni de comment le retirer. il est petit, et comporte les infos:V1V2V3...A1A2A3...De plus il y'a toujour des données liés à la pistes correspondante. merci à tous ceux qui prendront le temp de me répondre.voici le panneau:

Al instalar el programa adobe premier pro cs6 me dice que lo tengo  instalado en otro equipo. Y es asi. Pero el equipo viejo esta inservible y es imposible desistalarlo y usar la instalacion. Como podemos o desistalarlo o resolver el problema. Gracias.

I'm using 24.5.0, but this has been standard for quite some time.  1. Add two clips to a sequence and stack them one on top of the other.2. Disable the top clip.3. In your program monitor, double click so you can reposition/resize your clip.4. Premiere has now selected your invisible disabled clip instead of the clip you were likely intending to select. What I would expect to happen is for premiere to select the clip that I am clicking on in the sequence, what actually happens is that Premiere selects the clip that is at the position of my cursor that has the highest track number, regardless of enable/disable status. I cannot theorize a reason why this would be advantateous as it seems unhelpful to be able to move clips that are disabled as you can't even really see what you're doing with them.

Hi! I have a video that needs to use luma key to turn off dark pixels so they can be overlaid as a frame for a live broadcast. I have my Luma Key set up, everything looks good in the workspace preview, but every time I export, the Luma Key is left out.  I am required to export this is H.264, so no Pro Res or Quicktime option will work.  The comp is only one layer, a single After Effects comp, with the Luma Key. That's all the needs to render.  I'm proably missing something in my export settings, but I've tried everything I know to. Any help is much appreciated!

Was ticking along fine with the new update until I've just gone to export and gotten a "missing fonts" warning.  These are fonts integrated as part of a mogrt I created, so I know for a fact I have had these fonts installed for years.  In Adobe Fonts the light and bold versions of Roboto show up as activated:But within Premiere they're not available:And so Media Encoder is warning me on export that they're not available.I've tried logging out of Creative Cloud and logging back in, restarting Premiere & Encoder multiple times...What's going on here?  Any ideas?

Ver:Premiere Pro 25.0 OS:macOS Sequoia 15.1.1   プロパティパネルのトラックスタイル欄にある「スタイルを再定義」ボタンを使用するとクラッシュします。 キャプションの場合： 「プロジェクトのスタイル」を選択するとクラッシュする 「トラック上のすべてのキャプション」を選択するとクラッシュしない   グラフィックの場合： スタイルを再定義ボタンを押した瞬間にクラッシュする   When I use Premiere Pro 2025, Push redefine style button in property panel, it crush. How can you do same as me, please japanese description.  

See the screenshot, media encoder clearly existso what is the problem?

On Windows 10, I decided to download premiere again to use it for personal projects and whenever I open it after installation, the "Scanning for Audio Plugins" pop up freezes and does not resolve itself. Ive checked and the dll files it gets stuck on are all associated with Premiere (mind you I have FL studio, which doesnt seem to be the cause of the issue) so it seems its an issue with premiere. Ive installed and uninstalled a good 6 times all with the same issue. Does anyone know how to fix this? Ive looked for other solutions since some have had the same issue before but no solution came up.