Questions

I am conforming an edit, and I've received color-corrected clips w/ handles and an XML from the colorist that I need to make match my edit sequence. The original master clips in the timeline have scale motion effects (some clips set to 50%, others set to 53%, others set to 60%) and the XML I received from the colorist did not retain these motion effects, so the color-corrected clips are all at 100% scale. I know I can copy and paste attributes, but I can't figure out if I can copy attributes from all the clips in my sequence (say, 150 of them) and apply them to the 150 corresponding color-corrected clips. Is this possible?

Hello I'm using the 2022 version for this edit.  Two things are happening: 1. For the first cut, when I apply the simple cross dissolve- I only see the effect laying on the 2nd video track- the little "cross dissolve" icon is sitting only on the 2nd cut and I cannot center it between the 2 cuts. 2. When I try cutting further into the video, now the dissolve straddles the two clips, lining up evenly between them, but, no matter which side of the dissolve I pull to make longer, it is doing it evenly for BOTH side. In other words, I cannot have the dissolve longer on the first clip as it crosses into 2nd. Any help will be greatly appreciated! Thanks much r  

Hello everyoneI want to change the colours of the referee's pants without affecting other hues in the image, I've used the Lumetri mask to contain the color change within the mask. But if I want to change the fallen boxer's shorts, then I cannot replicate the mask on the same layer. When I duplicate it, the upper layer is visible which and the bottom adjustment (the referee's pants) is hidden. Is there a way to selectively target the same hues in a frame and achieve different colors? For example, the referee's pants and the fallen fighter's shorts are of the same blue tone, can I change, for example, the referee's pants to green and the fallen one's to yellow in the same layer? What are the steps to achieve this?Please help.Thanks 

(TLDR; watch the attached video file for an easier understanding of my problem) In Premiere 2020 which I have been using because of this "bug" or removed feature, you were able to click and hold on the timeline with your selection tool to "draw" a square selection.   I edit with over 7 video tracks, and not all of them are visible because I have so many; so what the selection tool used to do when "drawing" a square upwards (and out of the view) is that it would essentially do the same that it does if you scroll up on the track (so it'd make V1, V2, V3 which were in view, go out of view and show V4, V5, V6 for example)In the video I have attached, I'm trying to show you what I mean. Please tell me this is a bug or that I am missing some settings to allow it 😞 Why would this only work on the audio track and no longer the video track????

Premiere won't open my project because it cannot link my media.   I originally created and edited my project whilst connected to an office network, where all my video files were saved.   I copied everything onto hard drives, took my computer home and tried to open the project there. The file simply will not load. It remains in a frozen blank state, (presumably looking for the office network to reconnect all the video files) and never loads.   This has happened twice now with two completely different edits, which will both open when I return to the office and reconnect to the network.  I'd expect it to load the edit and ask me to manually locate the missing media like most editing software does?   Has anybody has this problem before and do they know a workaround/ solution? I have already tried importing the edit into a new project, and it still gets stuck!   Thank you Gary      [Moderator note: do NOT force users to download strange files to see

gostaria de saber se é possivel e de que forma, fazer a instação do adobe premiere versão 25.0 , com intel core i7 2600 AVX2 , que fala que é incompatível para a versão acima citada.

A student of mine has issue with Scene Edit Detection on .mp4 clips.He is on Windows 10 and Pr 2022. Other students, or myself don't have this issue. What could the cause be that het gets the "Scene Edit Detection encountered a failure when analyzing the clip" -fail?FYI:There are no Windows Updates pending.We have restarted the Computer, no succesWe have disabled GPU accelation, no succes      

Hey gang!I'm doing a sponsored spot for PBS, and they require that subtitles be CEA-708 and delivered in a .scc sidecar. But I can't figure out how to do this. Seems like PP will only export an .mcc. Can this be right? Seriously? I can't be the only one encountering this issue. I've also tried converting a .mcc file but nothing has worked so far. On a Mac running PP 2025 FYI. Thanks in advance!

When I transcribe a source clip, where is the text stored? Since I can import that transcribed clip to a new P Pro project and the text is preserved, I assume with the clip metadata? Thanks.

Ultimamente estoy teniendo muchos problemas en el flujo de trabajo con premiere v24.6.3 y versiones anteriores La interfaz va lenta, se tilda, va con retraso (aun asi teniendo el sistema operativo limpio)Pantallas azules de windows con reinicio de pc luego de que la interfaz se tilde y no responda.Pantalla en negro cuando premiere se tilda y no responde, luego toca reiniciar el programa por que la imagen se rompe. Esto no pasaba con versiones anteriores, no recuerdo cuales el software corria bien en mi pc.Mi PC:Nvidia GeForce GTX 1650 4gbControladores Game Ready V. 560.9464 gb ram Me pasa lo mismo con una GTX 4070 super

1. マルチカメラソースシーケンスを配置したタイムライン上で、そのマルチカメラソースシーケンスをダブルクリックし、ソースウィンドウにマルチ画面が表示された状態にする。（ソースウィンドウは一度表示させればバックグラウンド状態でも可） 2. そのマルチカメラソースシーケンスをタイムライン表示させ、タイムライン上のクリップを選択状態にする。 3. そのクリップをエフェクトコントロールパネルで数値を変更すると、クリップは選択されたままなのにエフェクトコントロールの表示が消えてしまいます。

PremiereProのテロップ作成で数字入力時に、例えば12345=6789と入力したいのに6以降の数字が頭から入力される（6789＝12345）現象になっていて困っています。何が問題なのでしょうか？どなたか原因がわかる方いたら対処法教えてください。OS：Windows10

Text box dissapears when editing text for mogrt in properties tab after the 2025 update. Premiere Pro v25.0.0 build 61. Same happens on all color themes, with or without acessible color contrast activated. 

When a transform effect is applied to GFX/Captions, and there is a transform effect applied with any amount of shutter angle, strange black dots appear (it looks like a render error). This only happens when bicubic scaling is applied, and the problem goes away when bilinear scaling is applied instead. This shows up on the exports and after rendering. This is happening across a range of windows and Mac machines and operating systemsApplies to Premiere 24.5 and 24.6

After editing each project and watching them the whole way through and making sure it's 100% ready to export, i export it. Then i open that file and there's always somewhere in it that it glitches and the audio keeps going and the video freezes and then everything out of sync. This has happened way to many times in the last few weeks to count. I thought it might just be the long form videos but i just did a short video and the same thing happened.  I've run it though media encoder and some i've exported right from Premiere and either way sometimes it glitchs and sometimes it doesn't. 

A la lecture d'une séquence, l'image se fige sur le moniteur programme ou avance par à-coups, rend Première toitalement inutilisable en montage. Aucune prévisualisation possible.

Im experiencing issues with the new version of Premiere Pro 25 (as well as with After Effects and Media Encore). The programs unexpectedly crash on startup, and I suspect third-party plugins might be the cause.In my case, Boris FX Continuum (2021) and Volna 2, which worked perfectly in previous versions, seem to be causing these crashes. I’d love to hear if anyone else has encountered similar issues and if they’ve found any solutions. Please share your experiences and recommendations!After removing the plugins, I was able to resolve the issue, but I’d like to understand what has changed from one version to the next for so many things to suddenly be incompatible.

Can't copy paste remixed audio from one sequence to another or move sequence to another project inside Production. When I select and drag and drop it to another sequence it works, but I can't cop/paste it. Please fix it.

"Frame holded" clip has different duration in effects control panel than in timeline. When i use "frame hold" option on a clip on timeline and then extend it the clip has unchanged duration in effects control panel.  It makes it impossible to add keyframes on extended clip. Please fix it.

So my automatic generated captions stopped displaying also in old projects without me changing any settings. I already tried reinstalling and downgrading several times but nothing seems to help, been on this problem for the last 4 hours maybe anyone has some ideas. It feels like the bug occured after changing to 25. I also tried exporting and reimporting the captions nothing helps it seem like they are still there just not displayed in the preview or the exported file.

Anyone else experiencing this?  I know previous updates have had this issue as well.  Thx,-Dave

With the new 25.0 version updates for Adobe (PR, AU, AE), I decided to update to the latest firmware.Since the update, there has been issues with Priemere dynamic linking with AE and AU files into a sequence. When bringing files into Premiere, a window pops up with a import loading screen, which stays at 0% and seems to have issues "finding" or "linking" to the other applications files.  AE: I have issues pulling in AE comps when I double click on my Project window to import files. When a new window on my PC prompts open to find and import, the import of the comp seems to get "stuck" and wont load. I did find a loophole and had to import my comps by going into: file, dynamic link, import AE comp. AU: I have tried to edit my audio sequence from Premiere into Audition, which seems to transfer everything into Audition just fine. As I try to export my sequence back into Premiere through: file, export, export to Adobe Premiere, regardless of mixdown or each track stem, Premie

I seek to dock this new Properties panel with others I have in a group, Lumetri, Essential Sound, Graphics Templates... but the new panel will not join. Please advise how to do it.  Windows Premiere Pro. Thank you... 

I edited the legends in graphics from the Essential Graphics panel, I understood that it no longer exists in the 2025 update.But in the Properties Panel or Chart Templates, I can't find where to edit the legends.I used to edit the entire legend from the Graphics Panel at once (size, color, location...), now where can I make this edit? In the Properties Panel it only opens to edit the caption text and nothing else.

I'm using Premiere Pro V25.0.0 Build 61.  I have two projects, both which work fine and have been updated to the latest (project file) version by PP when first opened in the new PP V25. I need to import two sequences from one project to another, (1) a multicam sequence, (2) the sequence containing the videos from each of the cameras used.  I get no errors, but having completed the "Import Project" dialogue box (using Import Selected Sequences) and clicking OK, all I get is an import files progress bar popup that just sits there, doing nothing.  There's no CPU activity for PP or any of the CC processes.  PP does not crash, it just does nothing.  I can click cancel and everything is back to normal.  Since I've never used this function before, I have no idea if it's the new release of PP or something else. Is there a way around this? Kind regards, Stephen