Questions

I had previously successfully exported a project to a WMV file using V14.2, but as of this past week, am unable to.  I did successfully export to a MOV file.  After hearing the issue with exporting projects in V14.2, I downloaded and installed the Beta V14.3.1 (build 23) hoping to correct an issue with exporting to a WMV file.  It continues to hang, usually around 9% complete.  I've checked and unchecked the "Enable hardware accelerated encodig and decoding" with no change.  System info and screen shot attached.  Graphics card is an NVIDIA GeForce GTX 1650, which does not support NVENC.  Please help as completing this project is becoming urgent.  

Please solve the problem with the driver, I always get an error in the system, although all the drivers are updated.The manufacturer does not release additional drivers that are offered for updating.Laptop HP Spectre x360 (screen - 4k)

Hi everyone,Is there any recommended workflow for processing and grading ProResRAW in Premiere Pro (beta)?I'm shooting Z6 and record ProResRAW(HQ) to Atomos Ninja. All seems great apart from the fact that the normally exposed footage appears to be 2-3stops overexposed while loaded into Premiere.The RAW has plenty of dynamic range and there is no detail lost in the highlights (after decreasing the exposure at least 2 stops in Lumetri color basic correction). But I'm wondering if the import has to be done differently or if the exposure of the camera needs to be explicitly adjusted while shooting ProResRAW to avoid the need to heavily correct the exposure for each clip. This is how ProResRaw footage normally exposed by camera looks after importing into Premiere.here it is corrected:There is no problem with exposure with any other format with this combo (and Premiere), so this is specific to ProResRAW.Then I'm interested in color grading. I love the detail of this footage, but so far,

I have a MacBook Pro 15" RAM 16 GB, Nvidia 750m 2 GB, but unfortunately when I turn on Renderer "Metal" full HD video (1080i) playback goes with interruptions, as if strobing, absolutely not smoothly with drop frames. At the same time, the iStat program shows the full load of the video processor and memory of the video card. At the same time, Davinci Resolve and FCPX play everything very smoothly, the processor and memory of the video card are half loaded. If I switch to soft Renderer in Premiere, the video card is not used at all, even for decoding the source video, but the CPU loads up to 70%. I only work with ProRes and DVCPROHD, very rarely with h. 264.

In the latest Beta build, we have updated Canon SDk to version 2.4. With this, we have also added support for files from  Canon 1DXMKIII.   Please try out the feature and let us know how it works for you.

Joining  of two clips  ( audo + video ) in a merge clips option, creates a new clip , but it is not possible to edit the clip from the source window. There is no possibility to put mark in and further edit. his is a bug of the program for a very long time not corrected. 

Once my CPU fan hits about 3000 RPMS it stays there until I restart my computer. It does not take much to make it hit 3000 RPMS. It only does it with the 14.3.0 Beta.  OS Name Microsoft Windows 10 ProVersion 10.0.18362 Build 18362Other OS Description  Not AvailableOS Manufacturer Microsoft CorporationSystem Name DESKTOP-435NAC3System Manufacturer Gigabyte Technology Co., Ltd.System Model Z390 M GAMINGSystem Type x64-based PCSystem SKU Default stringProcessor Intel(R) Core(TM) i9-9900K CPU @ 3.60GHz, 3600 Mhz, 8 Core(s), 16 Logical Processor(s)BIOS Version/Date American Megatrends Inc. F4, 12/4/2018SMBIOS Version 2.8Embedded Controller Version 255.255BIOS Mode LegacyBaseBoard Manufacturer Gigabyte Technology Co., Ltd.BaseBoard Product Z390 M GAMING-CFBaseBoard Version x.xPlatform Role DesktopSecure Boot State UnsupportedPCR7 Configuration Binding Not PossibleWindows Directory C:

On Beta 14.3.0 my workspace won't save properly, it keeps moving every time I reopen the application. Has anyone else seen similar issues? 

Is it possible to have a default selection for exporting media when it comes to selecting Entire timeline, In/Out etc. and crucially that default would carry over to AME when using it through either Queue or dropping a timeline into the render queue via dynamic link? I ask this because 99.999% of the time I want Entire Timeline. Most of the time I dynamically link my timelines in AME and drop a finished one in there and let it render while I start to work on the next version for the next newscast. Last night I didn't realize I had a rouge in point about 7 seconds into a 12-second reporter stand up intro. Guess what went on air in our newscast? Yup, a 4-second intro that made no sense. The default settings for both AME and the local export suck that you cannot pick "Entire Timeline" and it will default to that if that's your jam. In news we move fast and sometimes little things that should not have any consequence on the final export like a random in-point still sitting on the

So I've tried beta build 14.3 that has added RED SDK for R3D support and my RED files will actually play now, in the timeline but still not a smooth as it should be, I still get some dropped frames during playback. Footage still is a little jittery. I get 2-12 dropped frames during playback. I'm working with various RED footage up to 8K Resolution. Even when I drop the playback resolution to 1/4 or 1/8 it still doesn't playback as smooth as it did in premiere Pro build 13.1.5. Im available to provide any additional information needed to help.We're going in the right direction but we're still not there just yet. Getting RED playback as smooth as it was in v13.1.5 is the goal.my computer specs:iMac Pro3 GHz 10-Core Intel Xeon W processor128g ramRadeon Pro Vega 64 16 GB graphics cardEdit drive: Thunderbolt 3 raid ssd

The Beta keeps crashing on start-up. It appologizes (which is awefully kind), freezes, then closes.

Just started using the Beta version today and has crashed three times on me during the past hour.

Steps to reproduce:1. Set Hardware acceleration to CUDA in Project Settings2. Add video to track 13. Add a legacy title to track 2, after 3 seconds4. Play the sequence Result: After 3 seconds, when title starts, playback fails, and shows freeze frameExpected: Video should continue to play Workarounds: Turn hardware acceleration off (Software Only), then on again. Playback now works, but throws hundreds of Low Level exception errors  System infoNvidia K5100M video card, driver version 426.32 (no newer driver available)Application: Premiere Pro (Beta) v14.1.0.100OS: Windows v6.2RAM: 31.00 GBCPU Count (logical): 8

Happy to see that the new beta build finally addressed this issue. I'm sure some diehard users were asking for this for awhile. Especially like how it will acknowledge past projects as well. Very happy with this change as well as the new fixes and features the engineers have brought.

With the 14.3.0 beta once my CPU fan hits full speed it stays there. Closing Premiere Pro 14.3.0 does not help. I have to reboot my computer. Adobe 14.0 does not do it nor does DaVinci Resolve.I have an i9 9900KGigabyte RTX 2070Gigabyte Motherboard.32 GB of RAM

The result I got from the current version of Premiere Pro and the Premiere pro(BETA) when exporting is still the same. I am using my gaming laptop that has an NVIDIA GTX 1060 GPU and has my encoding set to hardware. however, when I press export, it is still utilizing around 16% of my NVIDIA GPU and 100% of my CPU. I also have my project setting set to GPU Acceleration (CUDA). I don't know what I'm doing wrong.

Currently there is an interesting but difficult behavior in nested sequences used across projects in a Production.   Add a nested sequence from one project file to another: the nested sequence "shows" as a nest, is added into that project's project panel, but no longer is connected to the original "nest" sequence. Changes in the original sequence do not ripple through to other uses in other project files.   Clearly, the addition of a nested sequence from one project file to another is treated something like copying a clip into a stand-alone project works, in that the nest is added to the 'new' project's file. Therefore apparently duplicating that as a "clip", except if the nest is double-clicked on the timeline you can still open up the original media clips.   But it doesn't behave like fully like a "nest" as you can't change the original nest and have that ripple through the Job.   Which seems to defeat much of the purpose of nesting to begin with.   Neil &n

Hi all,I try Premiere pro beta version to use Apple Prores RAW files with Windows10.I would like to modify RAW files settings, like white balance, or ISOS. Usually, there's "source settings" option with right click on RAW files (for example with RED raw files). But there's not this option with Prores Raw  files (or maybe with beta version, with all RAW files, I don't know).Do you know how can I change this RAW settings please ? Thanks a lot !

all shortcut dosen't work & i cant set any keyboard shortcut on the appthis a huge mistake

I have dual 2673 v3during export, premiere heavily uses only one cpu (80%), the other is used slightly (10%)

Anyone has an idea how to have "Beta" access to  Premiere Pro? How can I see "Beta App" on the menu? Thanks.

I've noticed especially when using Waves plug ins, that when I go to the control panel for that plugin, the interface is not redrawing to fill the breakout box, instead being about 10% size with a large red box filling the rest, and it's hard to maneouvre settings.Pic attached.Please fix it quickly.

  Very bad color reproduction, these are the same settings ProRes RAW and ProRes HQ       [Moderator note: please add images directly into your post via drag/drop or by using the picture icon of the formatting bar.]

Premiere Pro Optimize AMD CPUs

Hey guys I installed Premiere Pro Beta because of the ProRes RAW feature.Some things I noticed:Every second "Browse" function doesn't open a windows explorer window (for example to browse for a Lut or to import files), but premiere isn't responding like a window would be opened.If I have an Adjustment Layer above the ProRes RAW (HQ) file with a Lut in Lumetri Colors and I apply another Lumetri Colors effect to the video, the image will turn black when I adjust the sliders in the effect on the image.i need to put the exposure in the master to -2, to have the same picture as ProRes HQit doesn't put the system information in my clipboard, on reporting a bug Premiere Pro: 14.2.0.24GTX1060 (notebook) with Nvidia Studio driver 4422.92Intel HD Graphics 630 Driver v26.20.100.7263i7-7700HQ, 32GB RAM Beside of that, it's very stable