Copy link to clipboard
Copied
As I edited about a 20 minute clip of video, the memory consumption of Premiere Pro CC 2014 on my MacBook Pro (Core i7, 16GB memory, 500GB SSD with 150GB free, Yosemite) grew and grew. Now, when I open the project, Premiere Pro immediate consumes 30GB of memory! Which means that opening my project now takes about 15 minutes (the blank Premiere application appears in about 2 minutes, but the panels do not complete their slow fill-in for another 13 minutes - all the while the cursor is spinning, not allowing me to select anything, and activity Monty tells me that Premiere is unresponsive). Worse still, when I try to export my project, memory usage grows above 60GB, until my system gives up and reports "Your System has run out of application memory". Keep in mind that I been careful to reboot the system, reset PRAM, and run nothing significant except Premiere, Activity Monitor and Finder. I have Optimized for Memory in preferences, and even tried Limiting Memory usage to 8GB (even though this refers to RAM, not VM).
I monitor Premiere steadily gobbling up resources as VM usage and Memory Pressure increase. I understand that the proximal cause of the error message is probably an excessive number of page faults triggered by the massive memory hogging by Premiere. However, the root cause is Premiere using so much memory.
My 1920x1080 project timeline and bin contain .MTS files (from AVCHD footage), .mpg files (converted via ffmpeg from .TOD files), One EPS graphic, Five .PNG graphics from PowerPoint, One Title, and less than 10 audio files extracted for editing in Audition.
When the export begins, Premiere estimates about 1 hour to encode my timeline. After about 35 minutes, Premier has used up over 60GB of VM which causes Yosemite to report an error, and pause the application.
One solution I suppose is to tell Premier to stop buffering so much content. I have a fast SSD with over 100GB remaining at the time of error, and I can live with the export taking an hour longer if some artifacts are left on disk.
Is there a way to tell Premiere to load less into Virtual Memory?
Message was edited by: Kevin Monahan
Reason: needed more descriptive title
In File/Project Settings/Generel under "Video Rendering and Playback" switch the renderer from "Mercury Playback Engine GPU Acceleration (Open CL)" to "Software Only".
It will be a slower render but at least it should render. Works for me anyways.
Copy link to clipboard
Copied
Kevin,
Honestly, no reason for the interlacing - it's the only 1080 preset under QuickTime and the time lapses I'm working on are just for home display on my TV for now.
And yes, the memory usage seemed to climb at a slow-but-steady pace, a few tenths of an MB at a time, so it would seem at the beginning that there was no impact on the render or encoding (happened during both activities), but then as the memory started becoming full, the render/encode would slow, the memory usage would continue to climb, and typically when the render/encode was around 90% to 95% complete, the memory would run out.
Thanks again, I'll also try recreating on my side with different formats and codecs and see what happens.
Jason
Copy link to clipboard
Copied
This is exactely what happens!
Copy link to clipboard
Copied
I don't know if any of you have already seen this temporary fix to the "out of memory" problem, but my issues have been fixed (Premiere Pro CC 2015 on a 15" Macbook Retina -- 16GB RAM) by going to the preferences > Sync Settings and unchecking all the boxes.
I was getting the "Out of Memory window" every 20 minutes and having to restart, but since I unchecked the sync settings, it hasn't happened again. I hope it gets permanently resolved soon, because that caused a lot of delays in my work over the past two weeks!! Really frustrating!
Copy link to clipboard
Copied
I don't know if any of you have already seen this temporary fix to the "out of memory" problem, but my issues have been fixed (Premiere Pro CC 2015 on a 15" Macbook Retina -- 16GB RAM) by going to the preferences > Sync Settings and unchecking all the boxes.
I was getting the "Out of Memory window" every 20 minutes and having to restart, but since I unchecked the sync settings, it hasn't happened again. I hope it gets permanently resolved soon, because that caused a lot of delays in my work over the past two weeks!! Really frustrating!
Thanks for reporting back on this issue.
Kevin
Copy link to clipboard
Copied
Ive just come across this problem.
Had a CC2015 project working fine on a early 2011 MBP.
Just bought a brand new 15" MBP Retina, 16gb Ram, 2.5ghz Processor and today that exact project is constantly getting out of memory errors causing me to do 3 restarts this morning already.
Have reverted back to CC2014 and spent past hour rejigging the project from an XML export.
CC2015 desperately needs a bug fix update!
Odd it suddenly occurred with newer model MBP.
Copy link to clipboard
Copied
Hello Conan,
Ive just come across this problem.
Had a CC2015 project working fine on a early 2011 MBP.
Just bought a brand new 15" MBP Retina, 16gb Ram, 2.5ghz Processor and today that exact project is constantly getting out of memory errors causing me to do 3 restarts this morning already.
What were you doing as you got the out of memory errors? Was the Color workspace open? Were you exporting?
Thanks,
Kevin
Copy link to clipboard
Copied
Hi
Just editing varying codecs in a sequence. Mix of MP4, MXF and H264. No colour workspaces open.
The fix suggested in a previous thread of moving the preferences folder and disabling sync settings worked for me so id think this is the problem.
Copy link to clipboard
Copied
Been through a big hoop on this one.
Now back on PP 2014 and project running smoothly. I did increase memory to 32GB which improved overall performance a little but nothing to jump up and down about.
However - the last 10 attempts to render have resulted in a number of oddities;
Getting concerned about losing customers if this goes on too much longer.
PC
win 7 pro
SSD OS disc
4 x spiny 500 in a Raid
NVIDIA GTX690
Copy link to clipboard
Copied
I am running a 2015 macbook pro with the new Graphics card and I just got the message from the force quit menu. It seems to only be happening with the scopes open but I am color correcting so that's not really a good option. Quitting and reopening seems to be the only thing that clears the memory. Good thing I got that SSD.
2015 Macbook pro - NVDIDIA 2gb
Panasonic GH4 4k in multicam (6 streams, 1 stream 1080)
Copy link to clipboard
Copied
Hi Keith,
I am running a 2015 macbook pro with the new Graphics card and I just got the message from the force quit menu. It seems to only be happening with the scopes open but I am color correcting so that's not really a good option. Quitting and reopening seems to be the only thing that clears the memory. Good thing I got that SSD.
2015 Macbook pro - NVDIDIA 2gb
Did you install the Premiere Pro CC 2015 (9.0.1) update released on Monday yet?
Thanks,
Kevin
Copy link to clipboard
Copied
I hadn't realized there was a new version yet. Updating right now. I'll let you know if it fixes the issue
Copy link to clipboard
Copied
I installed the update. It seems to not be leaking memory. Thanks
Copy link to clipboard
Copied
I have the same problem,
Done everything possible and now installing older version of premier , i might be lucky.
I oure professional work, this is not acceptable,
I have Faith in Adobe to fix that issue ASAP
Copy link to clipboard
Copied
We are also seeing this same problem when trying to export clips from Premiere Pro CC 2015. We've tried the fix mentioned but the problem still persists. Yes we've updated PP to the latest version 9.0.2. We're on an older Mac Pro 3,1, 32GB of RAM, graphics card is an NVidia GeForce 8800 GT with 512MB, OS X 10.10.5. Please find the memory leak. We want to be able to run the latest version of PP without having to rollback to the 2014 version.
Copy link to clipboard
Copied
We now have the same problem on all our machines since the latest update this week of Premiere CC 2015 and Media Encoder.
Very frustrating if you are running 5 edit suites and none can export or transcode files anymore... because of a memory leak...
We are woking on Mac Pros with 16GB RAM on each machine.
Is there a way of downgrading to the previous version ?
Copy link to clipboard
Copied
I believe you can re-install the 2014 version - the same as I have done with my PC.
I'll not be touching anything connected with the 2015 version until these forums go relatively quiet on it.. I'm quite happy with 2014 performing more or less as it should.
Copy link to clipboard
Copied
Thanks ScubaBadger,
This year we've switched our edit suites to Adobe from other known NLEs and have been working from day one with the 2015 version.
This was sort of ok (many other annoying issues with Premiere Pro CC).
But since the latest update on Monday the 14th we have this memory leak issue, which makes it virtually impossible to work with Premiere Pro CC.
As we are struggling enough to get around all the bugs and overall flakeyness of the 2015 version I wouldn't like to roll back to 2014 as I don't know what other issues we then encounter in our setup.
Ideally I would just roll back to the previous 2015 version.
Does anyone know if this is somehow possible with the whole cloud-being-always-up-to-date rubbish ?
I will definitely not run an update of Adobe anymore without waiting a few month and running checks on a test machine.
Foolish of me to think an update will only have fixes and keeps your system up and running.
Copy link to clipboard
Copied
Adobe have put links into the App manager - but I don't know if they will show a link to a previous version you never had the previous version.
I also don't know why after all that's gone on for the last few months - Adobe have not taken the ability to revert a little more seriously and put obvious links up for those in a hurry toget bak to work.
Here are some links to another resource (I di in fact use this page to get back to 2014 versions):
Adobe CC 2014 Direct Download Links: Creative Cloud 2014 Release | ProDesignTools
I hope someone at Adobe will re-point you to links from within Adobe...
Copy link to clipboard
Copied
Thanks very much ScubaBadger !
BTW: roll back to 2014 is also possible.
I might try this on one of our machines.
Copy link to clipboard
Copied
Having issues while rendering out on 9.0.2.
2013 Mac Pro with 64GB of RAM and it still isn't happy! It is blowing through the cap!
Copy link to clipboard
Copied
I too am having the same problem when trying to export nearly any type of video file - even four minutes in length. I have no other apps open, but I go way over my RAM capacity almost immediately. I've tried moving the 9.0 folder to my desktop, and no luck. I desperately need to export a video for a client, but have yet to find a work around for this. Any of the links to the CC 2014 haven't worked for me to re-download.
Copy link to clipboard
Copied
Jennifer. The only workaround I have found is to render in very short sections. I am working on a 30 minute show and have kept my renders to about 3 minutes. I save immediately and then render the next section. Not perfect but it has got me through until there is a fix. Hope that helps!
Copy link to clipboard
Copied
Unfortunately this is only working for me for 2 minutes at a time, and on the third time I get the same application memory message, and I'm forced to restart my computer to start again. This is clearly not a viable workaround. Adobe - can you provide a download link for CC 2014? When will this memory leak be fixed??
Copy link to clipboard
Copied
Hi Jennifer,
Can we get more details? FAQ: What information should I provide when ask... | Adobe Community
Thanks,
Kevin
Copy link to clipboard
Copied
Hi,
Am running Premiere Pro CC 9.0.2 (6) Build on:
iMac (Retina 5K, 27-inch, Late 2014)
Processor 4 GHz Intel Core i7
Memory 32 GB 1600 MHz DDR3
Graphics AMD Radeon R9 M295X 4096 MB
CC Memory Settings:
Installed RAM: 32GB
RAM reserved for other applications: 6GB
RAM available for {Adobe Apps}: 26GB
System runs out of application memory, causing Force Quit and restart, when working in Timeline on a 10-minute project running Effects: Lumetri Color and Warp Stabilizer. Footage was colored in SpeedGrade via "Directlink to Adobe SpeedGrade" (if that matters). Not running SpeedGrade at same time, and was not running it when this problem began. Actually, the only other application running is Spotify. Runs out of memory if I try and render as well, but was simply setting Markers on footage that had been previously rendered, when it began happening. I have switched to "Mercury playback engine software only", which caused me to lose all of my preview files and renders, to no avail. Sometimes can work for 3 minutes after force quit and restart, sometimes five minutes.
Please help.
- Eric