Photoshop "All Content" not up to date

Semaphoric · ‎Nov 30, 2015

When I visit the Photoshop Forum, I land on the "All Content" tab, but the most recent message is from Sunday evening. Going to the "Discussions" tab shows the newest posts properly. This happens on all my computers and phone.

Semaphoric · ‎Nov 15, 2015

NOTE: Make sure you don't have your work path selected when hitting the delete key, or you will lose it! Best to save the path, so you can stroke it again later, if you decide you'd like a different brush.

Semaphoric · ‎Nov 12, 2015

It works here on CS6. I draw a path with the regular Pen tool With only the Background layer, you can see I have a "Work Path" Which I right-click on in the Paths panel, and choose Stroke with Simulate Pressure:

Semaphoric · ‎Nov 11, 2015

Your Pen is set to produce a Shape, which has its appearance changed in the Option bar. What you need is an "Ordinary" path: Then, be sure the path is selected in the Paths panel, and you are stroking on a plain raster layer.

Semaphoric · ‎Oct 04, 2015

Another tool to try is the Median filter. It can help to rotate your image first, so that the dots got vertical and horizontal, and resize the image so that the spacing between the dots is on even pixel boundaries (since the Median filter can't be set to fractional pixel values). Note the values you use for these operations, and when you're done, use complementary value to restore your image to its original size and orientation.

Semaphoric · ‎Feb 09, 2015

So, you've had a retina display forever, since the 1990s? And you dismiss the correct answers? This topic has been beat to death, but keeps coming back to life. Read up on what resolution actually is!

Semaphoric · ‎Feb 03, 2015

It's hard to be sure just what is going on, since the Histogram and Info panels only show the eight most significant bits.

Semaphoric · ‎Feb 02, 2015

Just another little oddity to toss in: if I open the ramp.psd in CS6, viewing any one channel in isolation shows banding, but any combination of channels does not.

Semaphoric · ‎Jan 31, 2015

Same here.

Semaphoric · ‎Jan 31, 2015

Windows 8.1, AMD FirePro V4900, 10 bit enabled, latest driver, Dell U2713H: The Ramp file looks fin in CS6 at all magnifications, and with any selections. In CC and CC2014, there is banding. That NEC app works like a champ on my system - nice and smooth.

Semaphoric · ‎Nov 14, 2014

I just tried this, and had the same result, with both CS6 and CC2014.

Semaphoric · ‎Oct 21, 2014

Because you did not resample. Same number of pixels in twice the inches. Try checking Resample.

Semaphoric · ‎Sep 01, 2014

A good comparison can be found here: Adobe Bridge CC vs. Lightroom 5 - Which is best for you? | Adobe Evangelists - Terry White | Adobe TV. For me, the thing that made me stick with Bridge is its support for non-photographic formats, such as Illustrator or InDesign files.

Semaphoric · ‎Jul 18, 2014

I agree about the Photography plan being a bargain. I just wish they had similar plans for some of the other Cloud apps. For instance, Illustrator has always been notoriously slow to add new features, so I would find it hard to justify paying the single-app price every month, but if it were priced like the Photography plan, I might change my mind.

Semaphoric · ‎Jul 17, 2014

Creative Suite 6

Semaphoric · ‎Jul 11, 2014

I think it's obvious Adobe doesn't want to have these user-to-user forums, so they try to make them as intolerable and unusable as possible. I am convinced Adobe uses Troll-bots to make us get fed up and leave, like Phosphor and so many others did.

Semaphoric · ‎Jun 29, 2014

I have a Dell Ultrasharp U2713H that I paid around US$800 for, and am pretty happy with it. I had one issue with a firmware setting (for viewing full-screen video) that often produced light purple boxes overlaying windows. It's on by default,but once I turned it off, it works like a champ. It's a 30-bit monitor, but AMD's drivers for my Firepro video card mess up the Windows clipboard when in 30-bit mode. There's a new driver out, but my workstation was down for two months; finally got it back running, but had to go out of town for a couple of weeks, so I haven't been able to test the new driver. When buying one of the Ultrasharps, you want one with a model number that ends in "H", not "HM".

Semaphoric · ‎Feb 12, 2014

Richard Dale wrote: . . . To my mind if you change the Dpi it should change the size of the image as there are less pixels per inch and there fore less pixels. Not fewer pixels, more inches.

Semaphoric · ‎Feb 01, 2014

Warunicorn wrote: I dunno about that where Microsoft's concerned. I'm still waiting on freakin' proper Windows 8.1 drivers for my wireless adapter. Apparently, it's like parsing the meaning of life. (Though, to be honest, Windows 8.1 isn't bad otherwise.) And it's not not just Adobe and Microsoft. Hello, yes, AMD, I'm talking to YOU!!! 10-bits my ***!

Semaphoric · ‎Jan 12, 2014

You can still buy CS6 from this page.

Semaphoric · ‎Jan 09, 2014

You're welcome. I must say that I found the new dialog quite off-putting, too. But, once you grok the correspondence between the two, you can see how the new features add power:

Semaphoric · ‎Jan 08, 2014

With my Rulers set to pixels, this worked fine for me:

Semaphoric · ‎Dec 11, 2013

Man, every time I check this thread. I find myself shaking my head in disbelief.

Semaphoric · ‎Nov 14, 2013

In the option bar, set the brush Mode to "Clear". You can also use the Brush option for the Eraser tool.

Semaphoric · ‎Aug 23, 2013

One of my favorite posts on this forum, from years ago, was, "I understand all about resolution! It's this 'Pixels-per-inch' business I don't get!" The poster din't make it out of the thread alive then, either.

Semaphoric · ‎Aug 17, 2013

What's the deal? Clicking on a thread takes me to that thread, but I have to click the Back button twice to get to the list of threads. Stupid Jive.

Semaphoric · ‎Aug 16, 2013

adamleewermuthmavs wrote: The problem is that for the last 10 years that I have been using photoshop on a mac, the images always displayed bigger and sharper on the screen no matter if I am connected to a monitor or not. Now that I have upgraded to a mac with retina display the images open smaller than I am use to. I, like the others asking for help are only asking if there is a setting somewhere that allows us to set it up so the images appear like they did before. Lets break out the ruler - Top image is the same picture I used before, on my mac screen in inches at 100%. Clearly it is showing bigger than an inch. Bottom image is the same picture at 100% but on my monitor hooked up to the mac and is really over 3 1/2 inches. This is how it use to display on my mac, nice and big and sharp. I am guessing it is a retina display issue. So without more condescending answers that help no one, is there a way to have the images display on my mac like they do on my monitor - the way they did before I had a retina display? Plug in a regular monitor into the HDMI port, and use that.

Semaphoric · ‎Aug 15, 2013

In Photoshop, 100% means each pixel you see on the screen is one pixel of the image. A 15-inch Retina display has 227 pixels per inch. A 200-pixel by 300-pixel image at this resolution then is 200 ÷ 227, or 0.88 inches, by 300 ÷ 227, or 1.32 inches. pmlink360's screen shot shows this.

Semaphoric · ‎Jul 09, 2013

The DisplayPro is needeed for calibrating the monitor hardware, but you can use another system to profile the monitor. I just got a U2713H a couple weeks ago, and can profile it with my I1 Pro (an older model) just fine.

Semaphoric · ‎Jun 09, 2013

Thanks, clearing the cookis seems to have worked.

Semaphoric

Semaphoric

Activity

Photoshop "All Content" not up to date

Re: Photoshop CS6 Stroke Path Greyed Out

Re: Photoshop CS6 Stroke Path Greyed Out

Re: Photoshop CS6 Stroke Path Greyed Out

Re: Removing newsprint pattern from photos.

Re: Photoshop 100% 72dpi is too small on Mac Retin...

Re: PS cc and 30 bit

Re: PS cc and 30 bit

Re: PS cc and 30 bit

Re: PS cc and 30 bit

Re: Why my stroke is pixelated ?

Re: New Image Size and Resolution in CC

Re: Lightroom vs Photoshop cs6

Re: Can you purchase photoshop permanently rather ...

Re: Can you purchase photoshop permanently rather ...

Re: Geez, Louise, This Forum Is Hard To Use!!!!

Re: Monitor for graphic design.

Re: New Image Size and Resolution in CC

Re: How is it possible for Adobe Support to be so ...

Re: Offline version Photoshop?

Re: New Image Size and Resolution in CC

Re: New Image Size and Resolution in CC

Re: 100% zoom is too small on screen

Re: Transparent Brush?

Re: 100% zoom is too small on screen

One step forward, two steps back

Re: 100% zoom is too small on screen

Re: 100% zoom is too small on screen

Re: i was going to get a dell u2713h

Re: Not staying logged in in Firefox