Video Hardware

Hey Folks. I don't get it... I try to output a 5.1 mix via HDMI (Multichannel PCM) from my MacOS Premiere timeline. In my world timeline track 1 mono should be channel 1 on my HDMI stream, track 2 mono on channel 2, ... Like editing to tape via SDI in olt times. But how!?There are so many settings: audio preferences, audio hardware preferences, timeline track settings, 5.1 channel assgnment, multitrack and so on. The Decklink HDMI output is connected to my AVR.Any ideas? Resolve works fine with the same hardware setup btw. But now I need it for Premiere. So, my questions:How to setup preferencesHow to setup timelineHow to setup track mixerThanks a lot!

This video might be helpful to some people. 

Hi there, I have a problem in Premiere 2022. When i add Cross dissolve to clips, sometimes it will act like a dip to black. There was someone that had the same problem from 2017 in this community but the solution that worked on her and the others didn't work for me.   Tried turning off 'Composite in Linear Color' in Sequence Settings and it didn't work.  

I'm still using the PC I built about 2 years ago, based on i9 9900K processor and ASUS 390A Motherboard.Quick spec of machine :CPU is overclocked and locked to 5GHz on all 8 cores - water cooledSamsung EVO NvME drivesRTX 2070 Super GPU64GB DDR4 3200Mhz Corsair Vengeance MemorySo - in general now I am  editing in 4K 50fps most of the time and this machine is working well.No need at all for proxies.An area I want to speed up is rendering though.The slow bit is when the timeline gets to some types of MOGRTs.I am asking a lot from the machne as I am using a hybrid Pro-Res master generation approach where all Previews are rendered in Pro Res so I can generate a fast Pro-Res master afterwards, using the previews during export.Looking at the Task monitor during rendering in Windows 64 bit - the CPU is only at approx 47 to 49% and the GPU idling along at 19%.No other major tasks appear to be running. Cache cleaned regularly and Cache sits on a separate fast SATA drive away from system dri

Hello I want to buy a laptop for adobe Premiere Pro. I have a two options and I need to make a decision. This one    or 2) i5 8th generation 12 gb Ram and 500gb harddrive Hp ? Which one would you recommend for videos? Not sure if the camera I have matters but I have a Canon EOS R.

Hello i recently build my new pc with ryzen 3700, asus tuf b550 and 32gb ram. I had a gtx 760 card till yesterday, with some limitations but i could use it. Today i finally got the 1070..and it is worste! The video (form xt3, 4k, h265) don't play at all, they are just freezed.I installed the latest STUDIO driver of the 1070any idea?thanks

HiI am mostly editing HD and 4K footage - SONY, PANASONIC, RED etc. I do the grading in Premiere PRO, sometimes use After Effects. How do you rate this build and what is the bottle neck in this setup? Is the GPU enough for smooth playback and work?CPU - AMD RyzenTM 9 5900X protsessor (12c24t, kuni 4.80GHz, 64MB)https://www.amd.com/en/products/cpu/amd-ryzen-9-5900xGPU - GeForce RTX™ 3060 Ti GAMING X 8G LHRhttps://www.msi.com/Graphics-Card/GeForce-RTX-3060-Ti-GAMING-X-8G-LHRMOTHERBOARD - GIGABYTE X570S AORUS ELITEhttps://www.gigabyte.com/Motherboard/X570S-AORUS-ELITE-rev-10#kfRAM - CORSAIR MEMORY DDR4 VEGEANGE LPX 64GB3200 (2*32GB) CL16https://www.corsair.com/us/en/Categories/Products/Memory/VENGEANCE-LPX/p/CMK64GX4M4E3200C16OS SYSTEM - KINGSTON 250GB NV1 M.2 2280 NVMe SSD SNVS250Ghttps://www.kingston.com/en/ssd/nv1-nvme-pcie-ssdADOBE APPS CACHE, SCRATCH - SAMSUNG EVO PLUS 970 NVME 500GBhttps://www.samsung.com/ee/memory-storage/nvme-ssd/970-evo-plus-nvme-m-2-ssd-500gb-mz-v7s500bw/https:/

If i buy the cpu ryzen threaddeeper pro 5995wx with 64 core and 128 thread, now, does premiere pro uses all 64 cores of this cpu, and will the rendering be faster than using 12900ks? Thanks for your reply

I need a low-profile video card for a Dell 7010 i7 computer.  I know that it is not a great computer to use, but it is all I have.  Does anyone know what boards I can use with Adobe Premiere Pro 2017.   I'm not making movies, just 30-second videos.  Time rendering is not a problem for me.  I would like to find something around $200 (even a used card).  I found a Gigabyte GeForce GTX 1050 Ti OC Low Profile 4gb Video card for $163 on NewEgg.  Would that work, or is there something better for the money? I have 16gb worth of ram on the computer and it is an i7 processor.  Any help would really be appreciated.  I'm on a very tight budget.  I may be able to go a little extra, maybe $250-300.  But it needs to be a low-profile board that will fit the computer.  Thanks so much for any help.  I'm new to this.

We are buying some new computers and wondering if the M1 chips are worth the price and also if  there are significant speed increases between the "max" to the "ultra versions

I use Premier Pro a lot, but only have a laptop. Considering buying a monitor to omprove the experience. Can anyone advise me on a spec (or even a specific model available in the UK) which would be good for this. Constraints are that my budget is NOT unlimited, and that I will from time to time need to move the monitor between rooms, so weight is a factor.Any advice gratefully received, thanks

or is there a significant difference to NVIDIA GeForce RTX 2070 SUPER | 8GB GDDR6 ? SCHENKER DTR 1717.3" Full HD IPS | 300 Hz | G-SYNCNVIDIA GeForce RTX 2070 Refresh | 8 GB GDDR6Intel Core i7-10700eK (or Intel Core i9-10850K)2 x 32 GB (64 GB) DDR4-3200 Samsung500 GB M.2 Samsung 970 EVO Plus | PCIe 3.0 x4 | NVMe1 TB M.2 Samsung 860 EVO250 GB M.2 Samsung 970 EVO Plus | PCIe 3.0 x4 | NVMehttps://bestware.com/de/schenker-dtr-17.html?configuration=%7B%22867635%22%3A%5B%2210522641%22%5D%2C%22867636%22%3A%5B%2210522651%22%5D%2C%22867637%22%3A%5Bnull%5D%2C%22867638%22%3A%5B%2210522685%22%5D%2C%22867639%22%3A%5B%2210522715%22%5D%2C%22867640%22%3A%5B%2210522718%22%5D%2C%22867641%22%3A%5B%2210522720%22%5D%2C%22867642%22%3A%5B%2210522721%22%5D%2C%22867643%22%3A%5B%2210522728%22%5D%2C%22867644%22%3A%5B%2210522748%22%5D%2C%22867645%22%3A%5B%2210522790%22%5D%2C%22867646%22%3A%5B%2210522796%22%5D%2C%22867647%22%3A%5B%2210522802%22%5D%2C%22867648%22%3A%5B%2210522806%22%5D%2C%22867649%22%3A%5B%2210

Hello, can I use notbook with GPU NVIDIA GeForce RTX 3050 Ti? thank youJiri 

Hi everybody!Can you help, that this laptop work properly with premiere and photoshop?https://www.alza.hu/asus-rog-strix-g17-g713rm-kh093-szurke-d7103650.htmI want to buy a new computer that price, and i want to be sure.I have to edit som short videos, sometimes its 4k. AMD Ryzen 7 6800H, 16 GB RAM, DDR5, NVIDIA GeForce RTX 3060, 6GB, 512 GB SSD thanks! 

I had some issues with the 22.2 update and ended up getting a new CPU cooler. https://www.youtube.com/watch?v=6MJfrehKFyw

I need to replace my msi graphics card GTX660 twin frozr, but it has been discontinued.....can I get advice as to what to replace it with for my CS6 programs.....mostly premiere pro and photoshop.....been using for many years in premiere pro and cuda program for enhanced GPU......using blackmagic intensity pro and just had to install windows 10 

Hi I'm going to buy a new computer since my current one is running slow. I'll be working a lot in Lightroom, Photoshop and Illustrator, maybe also a bit video editing. The computer I intend to but is a Mac Studio with a M1 Max 10 core CPU (8 performance cores and 2 efficiency cores), 24 core GPU 16 core neural engine 400 gb/s memory bandwith. 64 Gb unified memory (RAM). 512 Gb SSD. My question is if you think that these specifications are enough for Lr, Photoshop and Illustrator to run smoothly? Also, do you think I should upgrade the 24 core GPU to a 32 core GPU? Would any of these programs benefit from that, will I notice any difference? Which functions/proccesses use the GPU and benefit from more cores in the GPU? With my current computer I think image tracing in Illustrator and brushes in Ps runs very slow. What size SSD do you recommend 512 Gb or 1 Tb SSD? I think I'll use external harddrives for storage and backup. Finally I would like to say that I hope to ke

I have Premiere Pro 2021 running on a Predator Triton 500.After I finish my current project I plan on getting a new Desktop computer and updating all my Adobe CC software.The predator gets graphics card warning messages and does not run 4K smoothly. My new project will be done in 4K with individual sequences of 4-8 minutes, total run time of 60-120 min. My QUESTION. I need a recommendation for a current DESKTOP that will handle 4K clips… or a list of preferred specifications… Target price around 3500$

We are in the middle of updating our Digital Media Art Computer Lab and looking at a couple different models: Mac M1 Chip 8 core and the Windows Based Small Form Factor 2.8ghz, 32GB Computer with a Nvidia Quadro P1000.  Can anyone speak to how well these video cards and machines will perform while using Adobe Primiere Pro and Photoshop?  Appreciate your feedback?  We want to achieve our goal but want to be mindful of costs... Thanks,Matt 

The issues are not solved but I can demonstrate where the problem lies. We can no longer tell people to drop down to 1/4 resolution because the Mercury Playback Engine simply does not work. You folks can watch the video below and test it yourself.  https://www.youtube.com/watch?v=CyFu9vhOuHI

Hi, I want to buy the new Mac Studio to replace my IMac Pro. Based on the reviews I’ve read so far, it seems that the M1 Max is enough for 4K grading and video editing, and that the Ultra is only worth it for heavy VFX or 3D work (which I don’t do).  I’m considering the M1 Max with 32 GPU. Do you think the 64gb extra memory is worth getting? I currently have 32gb on my IMac Pro. Resolve runs perfectly fine even with complex grades but Premiere Pro has been running very slow on editing projects with mixed footage source / codecs and a couple of effects (stabilising, pre-grade/LUT, titles).  Any thoughts or advice?  Also, I’m not sure about the Studio Display. What alternative monitor would you recommend? I already have a Eizo calibrated monitor for my grading work. I’ve been looking at Eizo and BenQ options as main editing / GUI monitor but any recommendations would be much appreciated. Thanks!

C70 now support RAW recording. Any idea if I cna upgrade my current PC to play it back in real-time? Or do I need a new CPU and socket? (I know using procxies or ProRes would playback well, but I asking for hardware recommendations for playback of RAW.) Current build:- Intel® Core™ i9-9900KF Processor (8x 3.60GHz/16MB L3 Cache)-32 GB [8 GB x4] DDR4-3000 Memory Module - Corsair Vengeance LPX- NVIDIA GeForce RTX 2070 - 8GB GDDR6-motherboard ASUS TUF Z390-PLUS GAMING-footage on dedicated m.2 ssd  

Hi guys. I'm looking for a great laptop to run Adobe premiere on.My budget is quite large because I want it to last for years and run great. I'm thinking $3500 ish. I looked at Dell xps 15, 9510 but I was told it's a glossy screen and that I would want a mat one.Any recommendations?  

Can I Install Adobe Premiere Pro on a hp laptop? I tried to install Adobe Premiere Pro on my laptop, But it causes slow down my laptop speed. How can I manage it? Is there any other way to use it on my laptop without any lag???   [link removed by moderator]

I've had my Alienware (Aurora 10) PC for about 2 months now.  Running Premiere Pro 15.4 and I've noticed it's not quite as fast as I had hoped, especially after about 20-30 minutes of editing multicam. Right now, this computer is performing moderately better than the 7 year old (non-AMD) PC I replaced that crashed. I edit weddings mostly so multicam editing is a huge part of it. 4K footage handles better on this PC for sure, but what's troubling is... Editing even a few 1080p60 clips (XAVC-S) in multicam runs fine for about 20-30 minutes but then starts to stutter and forces me to stop, wait a few seconds, then hit play again for it to go smoothly again. Restarting Premiere seems to reset things so it runs smooth again for maybe another 20-30 mins. But if I add ANY cross dissolves to the nested multicam I can't even preview it because it stutters so badly and requires me to have to stop playback, skip over that edit point and hit play again. Ugh. Are there some settings