Adobe Acrobat Sign

When checked on the documentation - its suggests to use the link within the Adobe Sign Api section, but in my account I am not able to see that. Please help me out here.Create an Application Attaching the screenshot of my accounts page.

Every file I have 'Sent for Signature' appears to me as a single page which I then add a signature and date block to before sending.For my purposes, this extra signature block is totally unnecessary and I definitely don't need an extra blank page with a signature on it (it confirms nothing for us). I've looked through my options before and after sending and I can't find the parameter to turn this off anywhere. I myself only need to sign the document. It never shows up until after I send the document. Can anyone help?

Does anyone know if the feature to save fields as a template is available on the individual plan yet? I'd check for myself, but the Adobe Sign "compare plans" page doesn't make this clear.The feature I'm referring to is the ability to save a bunch of fields as a template for reapplying to future similar documents (rather than having to create new fields each time I need a document signed). This is a huge waste of time, especially when having to re-adjust the fields height and width using the very clunky drag tools and poor alignment options. For some strange reason Adobe decided to omit this needed feature from their "individual plan". I was told weeks ago that this feature was being considered for all of their Adobe Sign plans. Their "compare plans" says "save fields as templates" is available for all plans, but that is not true. Unless "save fields as templates" means something else?This confusion caused me many hours of wasted time a couple of months ago when I purchased Adobe Sign.

If I have Adobe Acrobate Pro DC...should I be able to get an eSign Access Code? or do i need a different subscritpion?  I want to be able tus use my email to send a doc for a signature.

I use adobe sign in my acrobat pro dc. I send alot of the same type of form to be signed and I want to know if you can set up a default reminder in the adobe sign in acrobat. I know you can set up the reminder before you send something in adobe sign when you do it online, but I want to do it in acrobat. I used to be able to before but now I can't.Thank you for your help

I created a new template but when adding fields, the Signer Info Name field would not appear on the document when sent for signature.  I could re-open the template and it was still there, it just didn't appear for signature.  The recipient was not able to fill in anything for that field.  I finally gave up and changed it to a plain text field and it appeared as expected.  All other fields worked as expected.  This was a very simple document, only sent to 1 recipient and did not require any additional signatures.

I recently started this job and changed my email and information to my name as opposed to the girl who held this job before me. Customer service changed the name as well as login email for me yesterday, and now I can view no documents sent from the previous email. Is there a way to access these older documents or has Adobe lost them forever?

I'm trying to streamline our process for one person signing the same doc multiple times as they finish the tasks outlined on the doc/agreement. We are in the middle of large event planning and to keep everyone on task we are looking for something that will let us configure a timeline for signing off on multiple tasks once they are finished. So, I want to be able to send this doc, the host finishes task 1 and I get a notification that they have signed off on the first task. Then the doc automatically is sent back, based on time sensitive triggers, a month or a couple weeks later so the host can sign off on task 2. And so on...until the week before the event where the last task's signature completes the doc. Is there functionality for this with AR? Thanks!

My understanding of Widgets is that they are created to display on a website; once signed, the document gets placed in the Signed category inside AdobeSign. You can easily delete a Widget from the Manage tab, whether it has been signed or not. If it has been signed, you can delete the Widget and the signed document stays in place. The problem is that we generate a unique Widget (pre-populated with data via API) for every user so that a user can fill out our forms online easier. Once filled out, the Widget is still there; leaving us with hundreds of Widgets that need to be deleted. Is there a way to delete a Widget via the API? I do see you can DISABLE a Widget with the API, but it would still exist in our account at that point. After it's been signed, we really have no reason to keep the Widget.

Hello,My question is simple: is it possible to have two countries check for the zip code field?Ex: zip(country=uk) --> zip(or(country=uk,country=fr)) In my case clients can be French (fr) or Belgian (be).Thanks in advance,Tom

When I send a contract for signature, up until recently I would use the fields for signature, date, etc. but I would also get a signature block (signature, email, title) at the bottom of every contract. I tried to get it to go away using tricks I found in these forums (like putting a signature block in and deleting, resetting fields, etc) but the signature block shows up at the bottom of every contract.Now, in addition to the signature block, the fields themselves don't populate. I insert them in the preview window:But then after I hit "Send" the contract doesn't show any fields where I've put them, there is ONLY the signature block:What's going wrong here?

I've just started using Adobe Sign, and I've added a couple of my employees, but I am unable to add one email address in particular. I keep getting an error message that says "cannot add this email address." My employee doesn't have any other Adobe account, so I'm not sure why this is happening. I've been able to add everyone else without a problem.

We recently signed up for the Enterprise trial and we are trying to get some users added. When we try to add the two users, its says "You cannot add that email address to your account." We have not added anyone else to the account yet so I know we don't have all 10 seats filled. Has anyone encountered this issue and found a way to fix it?

Hey there,I am a little baffled about how I send a document for a signature, that I must also sign? I can't for the life of me figure out how to do that. It's making client sign in both spaces... does this make sense?

I would like to set up a signature field for a customer to sign directly on a surface tablet.  This is a one time signature that would be signed free form and not a digital or e-signature.  Is this possible with Adobe DC and how would I do this?Thank you

In the trial version I had more options. For example could be customized with a image, email they received the signatories. Now in the paid version, I do not have this option. Where I can find it?

I use Adobe Fill & Sign DC on my iPad. Works great. no problems. Looking to use it on a Windows 10 Touch screen 2 & 1 Laptop. Does it work the same way as the version for the iPad? any help would be greatly Appreciated

We are looking for a solution for documents that have a dynamic number of checkboxes. There might be one, or there might be three, or there might be 20.  Is there any way, either through the web interface or the API, to handle this? I have seen two other products that will scan the document for [tags] or certain strings and place signing controls at those spots.  Does Adobe support functionality similar to this? Our goal is to avoid users having to manually drag 1 to 20 checkboxes onto the document.Thank you

How can I enable the software to drop the signatures by "right-clicking" and selecting the recipients?  It is toooo slow to drag the signatures for each of signatories, toooo many clicks to go through.  Please helpThanksParvinder

I have two options for a customer to choose from and I need to be able to have them choose option 1 with a checkbox and initials or option 2 with a checkbox and initials but right now it only allows for the customer to check on both boxes and initial both boxes so at the end of the day I don't know which option the customer is choosing.  Is there a way to correct this?

I would like to be able to put an expiration time of 30 days on my form documents. I do not see anywhere in Esign where this is possible. The forms were created in Formscentral and if I try to send it through "sign & track" the pull down options are no longer available in the form.

how do i make a new document??

Hi,I'm sending the document using PHP APIMy document has Two signature part.1. For Customer2. For SenderBoth need to sign the document.{{Sig_es_:signer:signature}} used this text tag for sign the document by Customer{{Sig1_es_:sender:signature}} used this text tag for sign the document by SenderI'm customer get signed but send not able to sign the document.Can you help me how to overcome this problem.

After i changed the email the page did not look the same it had a whole other format once i click the links that is shown on the page it refreshes back to the same page im not getting anywhere

We are getting reports of guests being able to submit contracts without the required signature field being signed.I can reproduce the issue anymore, but I'm curious, was this some sort of glitch that took place last week? Did anyone else run into this issue?