Adobe Media Encoder

So, things have been working fine up to now. just yesterday, premiere pro started only importing sound from videos. I tried re-encoding the video, but got this error instead. Can anybody give me a hand here?------------------------------------------------------------ - Encoding Time: 00:00:0007/26/2018 06:54:38 AM : Encoding Failed------------------------------------------------------------Export ErrorError compiling movie.Export ErrorFailed to create encoder.Writing to file: \\?\C:\Users\temp\Videos\Counter-strike  Global Offensive\1.mp4Writing file type: H264Around timecode: 00;00;00;00Error code: -1610153464------------------------------------------------------------

Hi I'm having an issue with Media Encoder on my new render server.The problem is that various GPU accelerated effects, mainly glow bases ones as they are most obvious, are not rendering as they should, I.e. not leveraging the GPU at all as though I am rendering in software mode, despite the GPU being heavily utilised when rendering and After Effects displaying and rendering them fine internally.I don't have this problem on my main PC which is in itself a problem since I built the server so that I could use that instead.Cuda does appear on the renderer list and is selected.Any ideas please tell me as I'm losing my patience here.Server specs.Dual X5675 Xeons (12 Cores 24 Threads)24GB DDR3 RamGTX 1060 3GB (Couldn't afford a quadro)8 port LSI raid controller1TB WD SSHD for the boot drive24TB Raid 5 Array256GB Samsung SSD for the scratch diskMedia Encoder v12.0 (Updating to v12.1 seemed to actually make things worse as GPU usage hit 0% and render times tanked.)Again rendering from After Eff

Pardon some the tediousness of this, but I wanted to be as clear, as I am thorough in regards to what steps I've taken to attempt to rectify these problems.As mentioned, neither my libraries nor Dynamic Link are working, or my cloud files themselves retrievable in this environment.I have more than enough horsepower, and more than enough allocated to CC.I checked AME error logsI uninstalled all appsI signed out of CCI uninstalled CCI executed Adobe Cleaner(I went through and deleted all additional files in AppData and Documents that cleaner nor uninstall cover)I pulled up the log report and though the manifest listed many problems of location, I figured if they've been deleted and cleared out, that would bebetter than knowing they are placed in a wrong location. There are some additional cues in there of which I have no idea as to what they are, but perhaps you can determine a problem from those logs. (SEE first video 6:42)As far as libraries troubleshooting,I closed out all apps, unins

I'm used to having to stop the dynamic link process and media encoder if I plan on reopening the program and using it more than once... but now even doing that won't get the dynamic link server to connect, it just hangs there...No updates available, this is the updated version that doesn't work.I know I'm not the only one with this issue, what's the deal... media encoder is supposed to make exporting easier not completely impossible.

Hello everyone!I have a 169mb video, with the following specs:I added a watermark on After Effects, and export it through Media Encoder with the following settings;Notice the estimated file size says 191 MB.After 3hs , the file is 2 GB on size, wih the following specs;Any suggestions? Thanks!

Hi Everyone, Starting yesterday, I could no longer export items to the queue in Media Encoder.  After I 'export' and send the queue, Media Encoder opens but nothing appears in the queue window.  It just stays blank.  Any suggestions.  Both apps are 12.1.2 (build 69) and I'm on a Mac OS Sierra 10.12.6, Thanks. John

I'm having issues exporting my After Effects file to an MP4 File. I'm using a modified version of the "YouTube 2160p 4K" preset. Everything was pretty much left the way it was except where I checked the "Use Maximum Render Quality" checkbox and changed the audio sample rate down to "44100 Hz". Previous files exported correctly as one MP4 file with this method, but this one seems to act strange. It renders an MP4 file that's just the audio of the project, and a corrupt M4V file that has numbers after the project name. For Example: OBS003.aep = OBS003.mp4 and OBSOO3.10988.303321.m4v. I've rendered it numerous times and each time, the corrupt file's name is always different and varies in size. I've tried to purge the cache in AE/AME and reset the computer--but I still get the same end result. I've tried to recreate the AE Project from scratch and ended up with the same result. I've also tried saving the output file on external drives but end up with the same result. The log file shows tha

Hello, I typically do a lot of little exports from a single edit and use AME to queue them for one session of export.  Didn't used to have a problem with memory, but lately if I do 1/2 as much at a time as I used to my 32GB RAM computer runs out of memory.  I've noticed that if I open up Activity Monitor, AME creates a PProHeadless task that takes up about 1.30 GB per video clip I'm trying to export.  These PProHeadless tasks don't go away after a clip is done exporting and just keep stacking up until all memory is gone.  Is this an error on AME's side?  How can I get AME to stop stacking PProHeadless tasks that don't seem to be needed anymore after the clip is finished exporting?Thanks,

Just wondering if anyone is having problems with ME since the latest update?I'm getting 30-40 second freezes doing simple things like changing format from QT to h264. Happens whether accessing ME directly or within Prem Pro.Win10 Pro32GB RAMi7-4770 @ 3.40GHz

Adobe Media Encoder is stuck in "Software only" whenever I render out anything. Despite GPU engine being selected it refuses to use it. I have 2 GPU's in my workstation and both sit idol during AME renders. It goes straight to the CPU's every time.

I am trying to prep my blu ray using Blu-Disc, but first I need the right type of movie file.Blu-Disc supported file types are MPEG-2, H.264 and VC-1.The format I use is H.264 Blu-ray, 1080p, 23.976.The result is an .mp4 and a .wav but the .mp4 cannot be loaded into Blu-Disc.I don't understand, howcome when I render an H.264 Blu-Ray, I get a file type that Blu-Disc doesn't recognize? Encore even states that the file type will be a .m4v.Render setting:Result:

My video has it's own track, but I want to change it with the new audio. How can i do it with "adobe media encoder"?

Dear all,today i was working with PR2018 (second to last version) with about 200 sequence. In every sequence, i've marked in and out (to cut clip after ciak and before the stop).In order to export fast, i copied PR project in 3 pc Win10 with the same PR2018 version and i queued in AME about 70 clip each computer.In one computer, AME doesn't consider in and out marker and i exported 70 whole sequence (i noticed only after queue finished...).Which step i missed? How can i set AME to consider in and out marker in multiple export? In AME i tried this step: selected all clip in queue, click on the first clip setting, changing in "in - out", but only setting in this sequence was changed, not in the ohter 69 sequence...Thanks in advance.

I need to re-install AME 2015.3 but it does not appear as a previous version on my Creative Cloud apps page.  Is there some other place I can download and install this version?

AE輸出到AME時，在AME點選格式設定卡在"動態連結連線中"，過約20-30分鐘顯示失敗(來源為空)嘗試過重安裝、複製可正常輸出的電腦的安裝資料夾、皆無法，但PR匯入AME點選輸出設定卻正常不過PR卻不能匯入AE的動態連結，AE卻可匯入PR動態連結AE版本CC2017 (14.2.1)PR版本CC2017 (11.1.2)ME版本CC2017 (11.1.2)電腦資訊DELL-Percision T7910CPU- Intel Xeon E5-2630 v4 2.2GHzRAM- 128 GBOS- windows 7 64bit SP1NVIDIA Quadro M2000Disk C -SSD 64/238GB (software were installed in here)F -HDD 890/3630GB-------------------------------------------------------------------------------I have Adobe CC licensed desktop software on my own, and already corrected install Adobe After Effect CC 2017 (ver 14.2.1.34) in C:/Program Files/Adobe/After Effect CC 2017 in my workstation tower ,so do Premiere(CC2017/11.1.2) and Media Encoder(CC2017/11.1.2).When I finished my work in AE, I rendered it with "CTRL+M" then went to Reder Queue, choose "Queue in AME" to Adobe Media Encoder, once I changed my output format setting in AME,the comp just stuck in "DynamicLink server connecting",after few miniutes,it Failed.But Premiere's render queue was wor

Hello forum folks,I've had encoding issues since upgrading to High Sierra / CC2018. on a MacPro 5,1, dual 3.46 6core , 48GB, GTX980ti 6GB, OS 10.13.5.Had almost no issues on Yosemite / CC2017.Now when encoding to h.264. If I encode to 720 I get hardware encoding. If I encode the same file to 1080 I only get software encoding.I've just selected the Vimeo or Youtube presets for either frame size, it doesn't matter.Why would 1080 cause this behaviour?I can repeat this on other similar machines.I've been reading on other forums folks having all sorts of problems encoding and Adobe is saying that the hardware is not compatible.Obviously the hardware is compatible If 720 works perfectly, why cripple the 1080?Bruce

So in my preset I have selected to verify the transfered files, however once Media Encoder is finished the task there is no window to confirm that the files were verified successfully.

Hello!I publish directly to Youtube a lot in Media Encoder. It used to work like a charm but ever since installing CC 2018, it fails almost every time.When I look at the Error Log, it tells me that its because I wasn't logged in or had invalid credentials which isn't true. I have logged in and out and even re-installed 2018 Encoder.Anyone else have this issue and or have a solution?Thanks!

Like, is 40,000 handles enough for working with a 30 or so video clips?  What...do you need one per video frame?  Left idle the handle count keeps climbing up and up... and up.  I don't think I even have to open a prproj...

I'm trying to expedite my transcoding workflow for this particular project, with scores of clips to review.My HPX170 records up to 4 audio channels, and in this case I i have my current preset configured to take channels 1 and 2 as mono tracks, and 3 and 4 as stereo. On testing this is working properly.However, we now know that we ONLY want source channel 2 (cleanest audio) on the output files.I can't figure out how change the preset to map source channel 2 to a single output track. I can delete 3-4 without issue, but when I delete track 1 in hopes of keeping only 2, the resulting output has source channel 1 instead of channel 2 as the lone track.I may be missing something obvious to a more seasoned user.Thoughts?

I have been having trouble on my 2012 MacBook Pro with 8GB ram a 2.3GHz Intel Core i7 and NVIDIA GeForce GT 650M 1024MBIntel HD Graphics 4000 1536 MB graphics. I am not able to import 4k footage and edit in Premiere, so created an ingest setting to make a proxy to work with a smaller file. Adobe support recommended also changing the renderer to the metal version which worked when I was on the phone with them, but each time I am importing footage and using Media Encoder to create the proxy, my computer screen just shuts off. Sometimes the entire system restarts and I get an Apple warning that there was an error that made the system shut down, and sometimes the screen just goes black, and the keyboard stays lit up. In that case I have to manually power down by pressing the power button until it shuts off. I send the reports to Apple when I restart the computer. Anyway, is it because my graphics card isn't strong enough? If I render the footage as 4k in Premiere once in the timeline, woul

I've been using the Adobe suite for about 3 years now. Back when I first started using it in 2015, I swear that when exporting from Premiere through Media Encoder, it would take very little to no time at all for the data to transfer to Media Encoder. I could hit "Queue" in Premiere, then click over to Media Encoder, and the file would already be ready to encode. I could hit the "play" button and start the encode right away. Maybe I would have to wait like 10 seconds at most. No matter how big the timeline/project was (be it 1-min video or a 2 hour video) it would always just shoot right over to Media Encoder once I hit "Queue". I feel like something has changed in maybe the last year or so... now it ALWAYS takes forever to transfer over. Even 1 min timelines take like 5 minutes to transfer. Longer timelines can take ever longer... What changed? Did Adobe change something about the way Media Encoder transfer the data over or something? Why did it go from always working like a dream to a

I have not seen this before.  I encode a 720p file using the H.264 480p widescreen codec and get an mp4 with no data and an xmp sidecar file.  I have tried using the Vimeo 480p widescreen variant with no success.  I encoded two file earlier yesterday with no issues, then this popped up.I am on MacOS 10.13.5 High Sierra, and using the latest version of Encoder.  I uninstalled and re-installed Encoder.  No luck.  I also tried with the 720p codec, but had issues. Another point of note; it took only around 20 minutes to compress a 55 minute piece of video.I went to my laptop, running an earlier version of encoder and MacOS.  I was successful on the laptop, but the time was extreme.So, my question is what changed?  Are MacOS High Sierra and the most recent version of Encoder incompatible?Any assistance would be appreciated.

I was exporting a 33 minute 4k Timeline from Premiere Pro and usually when I render I hit "queue" and then media encoder does the render. When I was rendering this clip I noticed that after 10 minutes of the render, media encoder gave an accurate time estimation of 6 hours. That seemed a bit ridiculous so I pulled up task manager to see how many resources media encoder was using, sure enough it was only using 17% of my cpu to do the render. So I decided to cancel the render and render it inside of Premiere Pro instead by hitting "export" instead of "queue" to see if It was going to use any more resources. Sure enough the render used 70-80% cpu the entire time and completed in just under 2 hours.   Is this supposed to be happening? I was using the same settings for both: H.264 with maximum render quality and render at maximum depth checked. As well as a target bit rate of 25 and maximum of 30Mbps. The file is 4K at 60fps (For YouTube, that's why the low bit rate). I am using t

I have a Premiere project that has footage from a Canon C100, Canon C200, and DJI Mavick.The only other assets in the project are a few mp3 music tracks, .wav recorded audio track, a pre-rendered MP4, and text made in Premiere itself.I have Mojo 2 and Shrinkray from RedGiant applied on most clips.All of these are items I use on a regular basis on daily exports for numerous projects and don't cause any issue.For some reason though, on this ONE particular project, whenever I export, it gets about 3/4th of the way done and then freezes and crashes.More recently, it no longer gives me a freeze and a crash though, now it just closes AME without any warning or notification whatsoever. I come back to look at my export and its no longer up. It doesn't generate a crash log or anything anymore and never even registers it was ever exporting at all.I have reinstalled the entire Adobe CC Suite, cleared all of my media cache, updated my OS, updated my graphics card, cleaned the system with Malwareby